ページ1に含まれる内容の要旨
Dome E2c Display
User’s Guide
ページ2に含まれる内容の要旨
© 2006 Planar Systems, Inc. All rights reserved. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. This document is subject to change without notice. Planar provides this information as reference only. Reference to other vendors’ product does not imply any recommendation or endorsement. This document contains proprietary information protected by copyright. No part of this manual may be reproduced by any me
ページ3に含まれる内容の要旨
Contents Product Information iv About the Display 1 Installing the Display 5 Appendix 10 Index 19 Regulatory Compliance 20 Standard Warranty 25 iii
ページ4に含まれる内容の要旨
Product Information The design of the Dome E2c digital display takes into account every known measure to ensure your personal safety. Improper use of the display can result in electric shock, fire, or damage to the display. Read all instructions before setting up the display. Classification: Shock Protection: Class I. Degree of Protection Against Electric Shock: No applied part. Degree of Protection Against Harmful Ingress of Water: Ordinary equipment (IPX0). Degree of Safety in the Presence
ページ5に含まれる内容の要旨
Symbol explanations DISPOSAL. Do not use household or municipal waste collection services for disposal of electrical and electronic equipment. EU countries require the use of separate recycling collection services. CAUTION. Read the accompanying text carefully, for proper operation and maintenance of the display system. DANGEROUS VOLTAGE. Important precautions about electric shock. Read the accompanying text carefully, to prevent damage to components of the display system and for your
ページ6に含まれる内容の要旨
Safety precautions External equipment intended for connection to signal input, signal output, or other connectors, must comply with the relevant IEC standard (EN/IEC 60601-1 series for medical electrical equipment). In addition, all such combinations (systems) must comply with the standard IEC 60601-1-1, Safety requirements for medical electrical systems. Equipment not complying to IEC 60601 must be kept outside the patient environment, as defined in the standard as at least 1.5 meters fr
ページ7に含まれる内容の要旨
Unpacking and handling tips The Dome E2c display is a precision instrument that requires proper care to maintain product operation and adherence to specification. Unpack the display and components carefully, then set up and handle the unit properly to avoid damage to the LCD panel. • Use both hands to grasp the display case when lifting it from the shipping carton, but avoid touching the screen. • Do not apply pressure to the screen or touch the screen with bare fingers or objects. Pressur
ページ8に含まれる内容の要旨
Cleaning the display Observe the following guidelines to maintain the display and the LCD screen. • Use a clean, lint-free, absorbent cotton cloth to clear off any residual glue from removal of the protective film or to remove surface dust. Apply light pressure to remove the dust. • Dampen a clean cloth with a small amount of isopropyl alcohol to remove glue or dust if the screen is still not clean. Do not saturate the cloth; otherwise, alcohol may seep into the display case and collect in t
ページ9に含まれる内容の要旨
Shipping/storing the display Keep the display in its shipping container until installation. Return the display to its original container whenever you need to store the unit, move it to another location, or return it for repair. The packaging supplied by the manufacturer protects the display while it is in transit. See environment specifications for more information. Before returning the display to the container, do the following: 1 Swivel the display panel in landscape mode. 2 Push the panel
ページ10に含まれる内容の要旨
AMLCD panel mounted on desk stand Display controller DC power adapter Power cords Display driver and Quick reference calibration software DVI cable Also included: Composite video, S-video, and VGA cables
ページ11に含まれる内容の要旨
About the Display The Dome E2c display system offers a 541-mm (21.3-in) color UXGA 1200x1600 AMLCD unit with a luminance output of 500 nits minimum. The display connects directly to a controller board via a Digital Visual Interface 1.0 interface. With AMLCD modules delivering 2-megapixel resolutions, the display’s thin film transistors operate in a transmissive-type display using an integrated cold cathode fluorescent tube (CCFT) high-bright backlight system. This display is designed for m
ページ12に含まれる内容の要旨
Display Components Review this illustration of the back panel to identify controls and ports on the display unit. 1 3 5 6 2 4 7 Legend 1 Reset. Restores the display configuration to default. 2 LED. Shows display status. 3 DIN 8-pin connector. Drives power to the display. 4 S-Video, separate video analog input port. Requires a 4-pin mini-DIN connector. 5 C-Video, composite video analog input port. Requires an RCA or phono connector. 6 DVI. DVI-I video input port. Supports DVI-D digital or VD
ページ13に含まれる内容の要旨
Display Positions You can adjust the tilt, height, viewing angle, and orientation of the display to maintain an ergonomic and comfortable viewing position. Make sure that your eyes are level with the top of the display cabinet so that you look downward to read the screen contents. Select a suitable workspace for the display. You need a stable, level, and clean surface near a wall outlet. Tilt range Height range Adjust the tilt angle of the Unfasten the stand lock at the display so that the
ページ14に含まれる内容の要旨
Desk Stand Features Unfasten the stand lock to adjust display height. Remove the stand cover to thread the power cord and DVI cable connections to the display. To activate the USB hub function, the display must be connected to a USB-compliant computer or another hub with a USB cable. Even if the display is in power-saving mode, the USB devices function when connected to the USB ports of the display. Stand height lock Move the stand lock lever to the left to adjust the height of the disp
ページ15に含まれる内容の要旨
Installing the Display Before you install the display controller, remove any existing graphics card and its driver from your system. Also disable any onboard graphics capability on the motherboard. Warning • In locations where 240V outlets are used, connect the Dome E2c display only to a center-tapped, 240V, single-phase supply (only for Canada and the United States). • Turn off the computer before installations. If you leave the computer on, you could suffer electric shock or cause damage
ページ16に含まれる内容の要旨
Install the Display Controller Before you install the display controller, make sure your display system will be set up in a well-ventilated location with an adequate amount of space. Excessive heat cannot dissipate when display vents are blocked. Turn off your computer and peripherals. Disconnect all the cables. Leave the power cord plugged into the grounded outlet. If you are installing multiple display controllers, install all boards before you install the display driver. To install th
ページ17に含まれる内容の要旨
Connect the Video and Power Cables Use only the power adapter (Ault MW122KA1223F52), power cord, and the video cable shipped with the Dome E2c display. To connect the cables 1 Plug one end of the DVI cable into the DVI port on the connector plate. Secure the connection. 2 Plug the power cord into the power input port on the plate. 3 Plug the other end of the DVI cable into the video port on the installed display controller. Secure the connection. (Use Video 1 port for the first display of a
ページ18に含まれる内容の要旨
Install the Display Driver Upon restarting your computer system, you must log on with administrator privileges. On Windows 2000 systems, Service Pack 4 or higher must be installed. To install the driver 1 Start the system. Click Cancel on the Found New Hardware Wizard. Click No when the system prompts you restart the computer. 2 Insert the driver installation CD and run setup.exe. 3Click Next. 4 Click Yes to the license agreement. The installation starts. 5 Follow the onscreen instructions t
ページ19に含まれる内容の要旨
Adjust Display Properties Use the Display Properties dialog to make changes to the video settings or to set up a dual-display configuration. To set the display orientation 1 Right-click the desktop and select Properties > Settings. 2 Select the monitor that you want to change. Then click Advanced. 3 Click the Monitor tab. Make sure that the check box for Hide modes that this monitor cannot display is empty (unchecked). 4 Click the Rotation tab. > Check Standard landscape for landscape mode. >
ページ20に含まれる内容の要旨
Appendix Troubleshooting Specification Video Modes Video Timing Connector Ports LED Status Lights Component Removal Power Management 10 | Dome E2c Display
