ページ1に含まれる内容の要旨
FP-T5084
FP-T5884
FP-T6374
PLASMA DISPLAY
Owner’s
Instructions
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
BN68-01183Z-00Eng.indb 1 2007-07-02 ¿ÀÈÄ 4:27:30
ページ2に含まれる内容の要旨
Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on none
ページ3に含まれる内容の要旨
User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 26 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image. Altitude The PDP can only operate normally at heights under 6500ft. Heat on the top of the P
ページ4に含まれる内容の要旨
Contents GENERAL INFORMATION CHANNEL CONTROL ■ List of Features ..............................................................5 ■ Selecting the Antenna .................................................. 38 ■ Accessories ....................................................................5 ■ Adding and Erasing Channels ..................................... 38 ■ Viewing the Control Panel .............................................6 ■ Setting Your Favorite Channels .......................
ページ5に含まれる内容の要旨
General Information List of Features • Adjustable picture settings that can be stored in the TV’s memory. • Automatic timer to turn the TV on and off. • A special sleep timer. • V-Chip function. • Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set- Top Box) needed. • HDMI/DVI connection of your PC to this TV. • Remote Control The supplied remote can be used to operate the TV as wel
ページ6に含まれる内容の要旨
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. FP-T5084/FP-T5884 FP-T6374 The product color and shape may vary depending on the model. ➢ 1 SOURCE 5 (ENTER) Toggles between all the available input sources Press to confirm a selection. (TV, AV1, AV2, S-Video1, S-Video2, Component1, 6 POWER Component2
ページ7に含まれる内容の要旨
Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 9-14. The product color and shape may vary depending on the model. 1 POWER IN 8 ANT 1 IN(AIR)/ANT 2 IN(CABLE) Connect the supplied power cord. Uses a 75Ω Coaxial connector for an Air/Cable Network. 2 DIGITAL AUDIO OUT (OPTICAL) Connect to a Digital Audio component. 9 EX-LINK C
ページ8に含まれる内容の要旨
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box. 1 POWER ( Turns the TV on and off. Press to backlight the VOL, CH, and active source button (TV, DVD, 2 NUMERIC BUTTONS CABLE, STB, VCR) on the remote. Press to directly select a channel. ) SOURCE 3 – Press to display all of the available P
ページ9に含まれる内容の要旨
Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the ➢ compartment. Do not mix battery types, i.e. alkaline and manganese. ➢ 3 Close the cover as shown in the figure. Remove the batteries and store them in a cool, dry place if you won’t be using the ➢ remote control for a long time. The remote control c
ページ10に含まれる内容の要旨
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the ANT 2 IN(CABLE) terminal on the back of the TV. Because this TV is cable-ready, you do not need a cable box to view ➢ ANT 2 IN (CABLE) unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANT OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT” or
ページ11に含まれる内容の要旨
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3 Connect an Antenna Cable TV Rear Panel between the ANT OUT VCR Rear Panel terminal on the VCR and the
ページ12に含まれる内容の要旨
Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR 1 Connect a Video Cable TV Side Panel (or S-Video Cable) between the AV IN 2 [VIDEO] (or S-VIDEO) jack on the TV S-Video Cable(Not supplied) 1 and the VIDEO OUT jack on or the Camcorder. 1 Video Cable (Not supplied) Camcorder 2 Audio Cable (Not supplied) 2 Connect Audio Cables between the AV IN 2 [L-AUDIO-R] jacks on the TV
ページ13に含まれる内容の要旨
Connecting a DVD Player/Cable Box/Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. 1 Connect an HDMI Cable TV Rear Panel between the HDMI IN 2 on DVD Player / Cable Box/Satellite receiver (Set-Top Box) the TV and the HDMI OUT on the DVD Player/Cable Box/ Satellite receiver (Set-Top Box). 1 HDMI Cable (Not supplied) What is HDMI? • HDMI, or high-definiti
ページ14に含まれる内容の要旨
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV. 1 Connect an Optical Cable Digital Audio System between the DIGITAL AUDIO TV Rear Panel OUT (OPTICAL) jacks on the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System. When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” jack: Optical Cable (Not supplied) Decrease the gain (volume) of the TV, and adjust the Wha
ページ15に含まれる内容の要旨
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. It may take a while when your TV starts. ➢ Plug & Play Feature When the TV is initially powered On, basic settings proceed automatically and subsequently: 1 Press the POWER button on the remote control. Menu language, Shop Mode, The message Menu language, Shop Mode, Channels and Time will be set. is i Channels and Time will be set. displayed. Start Plug & Play 2 P
ページ16に含まれる内容の要旨
Plug & Play 5 The TV will begin memorizing all of the available channels. Auto Program in progress. After all the available channels are stored, the Auto program menu reappears. Cable Channel 67 Press the ENTER button when channel memorization is complete. 68% The Clock Mode menu is automatically displayed. Stop To stop the search before it has finished, press the ENTER button with Stop ➢ Enter Skip selected. Plug & Play Auto Program is completed. 14 Channels were memorized. Air : 9 ,
ページ17に含まれる内容の要旨
T V Setup If you want to reset this feature... Plug & Play ► Language : English ► 1 Press the MENU button to display the menu. Time ► Press the ▲ or ▼ button to select Setup, then press the ENTER button. Game Mode : Off ► V-Chip ► Caption ► 2 Press the ENTER button to select Plug & Play. For further details on setting up Menu Transparency : Medium ► options, refer to the page 15~16. ▼ More Move Enter Return The Plug & Play feature is only available in the TV and DTV mode. ➢ Menu languag
ページ18に含まれる内容の要旨
Adjusting the Volume Using the Volume Buttons 1 Press the VOL + or VOL – button to increase or decrease the volume. Using the Mute Button At any time, you can cut off the sound using the MUTE button. 1 Press MUTE and the sound cuts off. The word “Mute” will appear in the lower-left corner of the screen. 2 To turn mute off, press the MUTE button again, or simply press the VOL + or VOL – button. Viewing the Display The display identifies the current channel and the status of certain audio-video
ページ19に含まれる内容の要旨
Memorizing the Channels Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Selecting the Video Signal-source T V Channel
ページ20に含まれる内容の要旨
Setting Up Your Remote Control After your remote control has been properly set up, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch among these modes, and control whichever piece of equipment you choose. ➢ The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes. Setting Up the Remote to Operate Your VCR 1 Turn off your VCR. 2 P
