Edelbrock 15008の取扱説明書

ページ1に含まれる内容の要旨

BLOW OFF VALVE
®
Catalog # 15008
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before installing your new Edelbrock Blow Off Valve. If you have any questions or
problems, do not hesitate to contact our Technical Hotline at: 1-800-416-8628, from 7am-5pm, Monday-Friday, Pacific
Standard Time or via e-mail at: Edelbrock@Edelbrock.com. Please fill out and mail your warranty card.
• Description: This blow off valve is designed to allow boost pressure to be bled from the intake p

ページ2に含まれる内容の要旨

4. Now place the o-ring into position around the receiver 6. Attach the supplied banjo fitting using the supplied groove of the mounting flange (See Fig. 3). Place the banjo bolt, and using one sealing washer on each side blow off valve over the o-ring and press until flush with of the fitting (See Fig. 6). Adjust the banjo to the the flange (See Fig. 4). Position the clamp over the desired direction and tighten the banjo bolt. Use a 1/4” blow off valve and flange. If your blow off valve is not