ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Setup ................................................................ 18 Contents Media Browser .................................................. 23 Package Contents .................................................. 2 Playing MP3 Files ............................................. 23 Features ................................................................. 2 Viewing JPG Files ............................................. 23 YELLOW: Toggles media browser Preparation .........................
ページ3に含まれる内容の要旨
Package Contents Introduction Thank you for choosing this product. This manual will guide you for the proper operation of your INFO TV. Before operating the TV, please read SLEEP SCREEN SOURCE PRESETS this manual thoroughly. Please do keep this manual in a safe place for future references. This device is intended to receive and display TV RETURN MENU Batteries: 2 X AAA programs. The different connection options make an additional expansion of the reception and display sources po
ページ4に含まれる内容の要旨
needs to be replaced, it should be done by qualifi ed Waste Disposal personnel. Instructions for waste disposal: Moisture and W ater • Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, Do not use this device in a humid and such as foil bag, must be kept away from children. damp place (avoid the bathroom, the • Batteries, including those which are heavy metal- sink in the kitchen, and near the washing free, should not be disposed of wit
ページ5に含まれる内容の要旨
Warning Do not leave your TV in standby or operating mode when you leave your house. The Standby / On button doesn´t separate this device completely from mains. Moreover the device consumes power in the standby operation. In order to separate the device completely from mains, the mains plug has to be pulled from the mains socket. Because of that the device should be set up in a way, that an unobstructed access to mains socket is guaranteed, so that in case of emergency the mains
ページ6に含まれる内容の要旨
Overview of the Remote Control 1. Standby 2. Image size INFO 3. Sleep timer 4. Numeric buttons SLEEP SCREEN SOURCE PRESETS 5. Return / Exit / TXT Index 6. Cursor up / TXT up page 7. Cursor left 8. Programme up / Page down (in DTV mode) 9. Programme down / Page up (in DTV mode) 10. FAV (*) (Favourite Selection)(in DTV mode) 11. Mono-Stereo / Dual I-II RETURN MENU 12. Previous programme 13. Electronic programme guide (in DTV mode) 14. No function 15. No function 16. Stop (in DTV mode). 17. R
ページ7に含まれる内容の要旨
LCD TV and Operating Buttons FRONT and REAR VIEW SIDE VIEW Control Buttons 1. Up button 2. Down button 3. Programme/Volume / AV selection button 4. Standby/On button Note:You can use “+/-” buttons to change volume. If you want to change channels, press P/V/AV button once and then use “+/-” buttons. If you hold the P/V/AV button about a few seconds, source OSD will be displayed. Main menu OSD cannot be displayed via control buttons. V iewing the Connections- Back Connectors 1. SCAR T
ページ8に含まれる内容の要旨
Viewing the Connections - Side Connectors 1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section. 2. USB Input (Functional in DTV mode only. Note that programme recording feature is available via this USB input only). You can connect external hard disk drives to this input. 3. Video Input is used for connecting video signals of external devices. Connect the video ca
ページ9に含まれる内容の要旨
CAUTION ! USB Connection • Quickly plugging and unplugging USB devices, • You can connect a USB hard disk drive or USB is a very hazardous operation. Especially, do not memory stick to your TV by using the USB input of repeatedly quickly plug and unplug the drive. the TV. This feature allows you to play fi les stored This may cause physical damage to the USB in a USB drive or record programmes. player and especially the USB device itself. • 2.5” and 3.5” inch (hdd with external power supp
ページ10に含まれる内容の要旨
Connecting the LCD TV to a Connecting to a DVD Player If you want to connect a DVD player to your LCD PC TV, you can use connectors of the TV set. DVD For displaying your computer ’s screen image on players may have different connectors. Please refer your LCD TV, you can connect your computer to the to your DVD player’s instruction book for additional TV set. information. Power off both the TV and the device • Power off both computer and display before making before making an
ページ11に含まれる内容の要旨
Using Side AV Connectors Inserting Batteries into the You can connect a range of optional equipment Remote Control to your LCD TV. Possible connections are shown • Remove the battery cover located on the back of below. Note that cables shown in the illustration are the by gently pulling backwards from the indicated not supplied. part. • For connecting a camcorder, connect to the VIDEO • Insert two AAA/R3 or equivalent type batteries IN socket and the AUDIO SOCKETS. For selec
ページ12に含まれる内容の要旨
functions will be described in accordance with the Input Selection menu system of your TV. Once you have connected external systems to your • Functions of the menu system are described in the TV, you can switch to different input sources. following sections. • Press SOURCE button on your remote control for Volume Setting directly changing sources. • Press “V+” button to increase the volume. Press “V-” or button to decrease the volume. A volume level scale • Select “ Source
ページ13に含まれる内容の要旨
Timeshifting IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. • Press (PAUSE) button while watching a broadcast for switching to timeshifting mode. • In timeshifting mode, the programme is paused and simultaneously recorded to the connected USB disk (*). Press “ ” (PLAY) button again to watch the paused prog
ページ14に含まれる内容の要旨
Press (STOP) button to stop a playback and return to return to Recordings Library. Slow Forward If you press (PAUSE) button while watching recorded programmes, slow forward feature will be available. You can use button to slow forward. Pressing button consecutively will change slow forwarding speed. • Press (STOP) button to cancel instant recording. The following OSD will be displayed: Electronic Programme Guide (EPG) • Some, but not all, channels send information about the curren
ページ15に含まれる内容の要旨
Programme Options In EPG menu, press the OK button to enter the “Programme Options” menu. Digital Teletext (** for UK only) • Press the “ ” button. • The digital teletext information appears. • Operate it with the coloured buttons, cursor buttons and OK button. Select Channel The operation method may differ depending on the In EPG menu, using this option, you can switch to the contents of the digital teletext. selected channel. Follow the instructions displayed on digital teletext Rec
ページ16に含まれる内容の要旨
• Press “ ” or “ ” buttons to select the “ Move ” item on Channel List menu. Following OSD will be displayed next to “ OK ” item IDTV Menu System to indicate that enter a number by using the numeric Press the “ M ENU” button. Main menu will be buttons on the remote control and press “ OK ” to displayed. confi rm. Note: If you enter the same programme number of the channel that you want to move, “.... channel services will be replaced. Do you want to continue?” OSD will be
ページ17に含まれる内容の要旨
How to Add a Channel to a Favourites List Now pressing “ ” or “ ” button moves to the previous/ • By pressing “ ” or “ ” buttons, highlight the channel next character. Pressing “ ” or “ ” button toggles that you want to add to the favourite list. the current character, i.e., ‘b’ character becomes ‘a’ • By pressing “OK” button, the highlighted channel is by “ ” and ‘c’ by “ ”. Pressing the numeric buttons added to the Favourite List. ‘0...9’ replaces the highlighted character wit
ページ18に含まれる内容の要旨
Editing a Recording Timer Select a timer in the Recording Tiners menu by pressing “ ” or “ ” button. Press GREEN button on the remote control and Modify Timer OSD will be displayed on the screen. You can press RED button to set this recording as discarded when the disk is full. You can set desired preferences and when completed, you can press GREEN button to save your settings. The green line at the bottom of the screen displays Deleting a Recording Timer available disk space. Red line
ページ19に含まれる内容の要旨
Some Digital Terrestrial channels operate on a Pay Recordings Library Per View basis. These require a subscription and a IMPORTANT: To view recordings library, you should fi rst hardware decoder. connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Obtain the Conditional Access Module (CAM) and the Otherwise, recording feature will not be available. viewing card by subscribing to a pay channel company, To view the list o
ページ20に含まれる内容の要旨
Confi guration You can confi gure the settings of your TV. Select Confi guration from Setup menu and press “ OK ” to view this menu. Press the “EXIT” button on the remote control to exit. The following options are available for adjustments: Start Early (*) You set recording timer’s starting time to start earlier by using this setting. (*) Available only for EU country options. End Late (*) Dolby D Digital (* for EU countries only) (Optional) You set recording timer’s starting time
