ページ1に含まれる内容の要旨
Explanation of WARNING Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence dangerous voltage within the
inside of the product that may be sufficient level to constitute a risk of electric
shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and servicing instructions.
Safety instructions
1) Read these instructions.
2) Keep t
ページ2に含まれる内容の要旨
17) Do not expose your LCD TV to dripping or splashing, and do not place objects filled with liquids on it. 18) The Shock Hazard Marking and Associated Graphical Symbol are provided on the back panel of unit. 19) This product is only to perform the useful function of entertainment and visual display tasks are excluded. 20) Wall or ceiling mounting: When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. Use o
ページ3に含まれる内容の要旨
Content ACCESSORIES................................................................................................................. 1 FRONT PANEL BUTTONS ................................................................................................ 2 BACK PANEL BUTTONS................................................................................................... 3 REMOTE CONTROL.........................................................................................................
ページ4に含まれる内容の要旨
ACCESSORIES Thank you for purchasing this LCD-TV. This LCD-TV package comes with: LCD TV User’s Guide Warranty Card Remote control Battery AA x 2 Power Cord VGA Cable RCA A/V Cable 1
ページ5に含まれる内容の要旨
FRONT PANEL BUTTONS Volume Down Volume Up On Screen Display Menu On/Off CH Down CH Up Input Source Selection (Enter) Power ON/OFF button Power LED Indicator/ Remote Control Receiver 2
ページ6に含まれる内容の要旨
BACK PANEL BUTTONS A B C D E F G H I J A Power (AC input) B Headphone Jack C PC/ DVI Audio input D VGA signal input E Composite Video input F YPbPr signal input G AV/ S-Video/ YPbPr signal Audio input (left/right) H S-Video input I HDMI Input Terminal J Cable/ Air TV input 3
ページ7に含まれる内容の要旨
REMOTE CONTROL 4
ページ8に含まれる内容の要旨
Remote control button function as follows: 1 INPUT Input source select 2 ENTER Confirm selection or enter selected menu 3 TV Direct to TV source 4 - VOL + Adjust volume UP/DOWN 5 LIST Select channel from program list 6 GUIDE Select electronic program guide (EPG) 7 0~9, - number Directly channel select 8 POWER Power ON/OFF 9 UP/ DOWN/ LEFT/ Move the cursor In OSD menu: UP/ DOWN for OSD function RIGHT select and LEFT/ RIGHT for function adjust 10 MENU On Screen Display (OSD) menu ON/OFF
ページ9に含まれる内容の要旨
INSTALLATION Connecting RF antenna and Cable TV Make sure the power is OFF before installing your LCD TV. 1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV channels into memory with Auto Scan function when using an antenna TV system. This air input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV system (ATSC) can be found by the scanning of “AIR” with Auto Scan function. See page 21. 2) Cable TV: Connect the LCD TV to th
ページ10に含まれる内容の要旨
2) With S-Video cable: S-Video Cable (not supplied) Audio Cable (not supplied) VCD or DVD Player 3) With YPbPr cable: YPbPr Cable (not supplied) Audio Cable (not supplied) VCD or DVD Player 4) With HDMI cable: VCD or DVD Player (DVD Player should have the HDMI output terminal) HDMI Cable (not supplied) 7
ページ11に含まれる内容の要旨
5) With HDMI-DVI cable: Audio Cable (not supplied) HDMI-DVI Cable (not supplied) VCD or DVD Player (DVD Player should have the HDMI output terminal) Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold separately). Headphone (not supplied) Connecting to a Computer 1) With VGA Cable: Connect the VGA cable from VGA output of the computer to the VGA terminal input of your LCD TV. Also, connect the Audio In cable (green
ページ12に含まれる内容の要旨
2) With HDMI-DVI Cable: Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of the LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the audio input terminal (green) of the LCD TV. PC PC Audio In Cable (not supplied) HDMI-DVI Cable (not supplied) Connecting with the power cord Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have been completed, and plug the other end
ページ13に含まれる内容の要旨
BASIC OPERATION To operate your LCD TV, you may use the TV remote control or top panel buttons to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2. Insert the power plug and the power LED indicator will light orange. Power On/Off To turn the LCD TV on/off : Press the POWER button under the LCD TV, or press the POWER button on your remote control to turn on/off the TV. The power LED indi
ページ14に含まれる内容の要旨
Electronic Program Guide (EPG) Press the GUIDE button on the remote control and the program information for the channel you are watching will be displayed on the screen. * The picture here shows an example of the GUIDE screen in a DTV source. Channel Select Press number key or ▼CH ▲ button to select your desired channel. 1. ATV The “-” button has no function in ATV mode. Directly press the number buttons to select channels. 2. DTV Use “- ＂button to select the sub channel in DTV. E
ページ15に含まれる内容の要旨
Favorite Channels Press FAV button to show Favorite List and select your favorite channels that have already been stored. (You need to preset the favorite channels from the OSD menu to enable this function.) Sleep Time Setting Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off the LCD TV after a preset period of time passed. There are several times for choice – OFF, 15min, 30min, 60min, 90min, 120min, 180min, 240min. Zoom Press ZOOM b
ページ16に含まれる内容の要旨
ADVANCED OPERATION—OSD MENU PICTURE Menu —To adjust the picture quality In TV, AV, S-Video, YPbPr, HDMI source: Note: When in AV, S-Video, YPbPr or HDMI source, the TIME and TV Menu options are disabled. In D-SUB source: Auto Adjust: To auto adjust picture’s horizontal position, vertical position, fine tune and H-Size. (only enabled in D-SUB source) Aspect Ratio: To select image size from Full, 4:3, Movie Scale, or Zoom In. Color Mode: To select color mode from Normal, Warm
ページ17に含まれる内容の要旨
Tint: To adjust tint level. Color: To adjust color. (right: brilliant color, left: pale color.) Advance: To adjust advanced D-SUB functions, press ► to enter. (only enabled in D-SUB source) Phase: To adjust delay time of phase in order to reduce the noise of picture. Clock: To adjust clock frequency in order to get optimized horizontal size. V-Position: To adjust the vertical position of the picture. H-Position: To adjust the horizontal position of the picture. SOUND Menu —
ページ18に含まれる内容の要旨
In ATV, AV, S-Video, YPbPr, HDMI, D-SUB source: Bass: To adjust bass. Treble: To adjust the treble. Balance: To adjust left and right audio balance. Audio Language: To select the available audio languages. (only enabled in DTV mode) TIME Menu —To set up time zone It is only active in TV source. Time Zone: To select the correct Time Zone for your area. Daylight Saving Time: To select summer Daylight Saving Time. 15
ページ19に含まれる内容の要旨
OPTION Menu —To set up OSD window In TV, AV, S-Video source: In YPbPr, HDMI, D-SUB source: OSD Language: To select an OSD language from English, French or Spanish. OSD Timer: To setup the display time of OSD. (5, 10, 15, 25, 40, and 60 seconds) 16
ページ20に含まれる内容の要旨
Closed Caption: To set close caption options. CC Mode: To select Closed Caption Mode from Off, On, or CC on Mute. Basic Selection: To set basic analog closed caption options. (CC1~CC4, TEXT1~TEXT4) Advanced Selection: To select closed caption signal formats and set up caption modes for digital TV channels. (Service1~6) Option: Press ◄► to select Mode from Default or Custom. When “Custom” is selected, use ▲▼ to select the desired controls, ◄► to adjust detailed settings. Memo
