ページ1に含まれる内容の要旨
USER’S MANUAL
MANUEL DE L’UTILISATEUR
MANUAL DEL USUARIO
LVM-42w2 / LVM-47w1
1080p Monitor
Moniteur 1080p
Monitor de 1080p
www.westinghousedigital.com
Westinghouse Digital Electronics SE-UM-4203-0601
Santa Fe Springs, CA
ページ2に含まれる内容の要旨
English Contents Important Product Safety Instructions………………………………….2 Safety Guidelines….………….………………………………………….4 Cleaning the HD Video Monitor………………..……………….…….... 5 INSTALLATION Package Contents……………………………….………………………. 6 Front View of the HD Video Monitor……………..……………………. 7 Rear View of the HD Video Monitor……………….………..…………. 7 Side View of the HD Video Monitor…..……………………...………… 8 Remote Control…………………..…………………………..………… 10 Installation………….…………………………………………………….11 OSD Functions
ページ3に含まれる内容の要旨
English 1
ページ4に含まれる内容の要旨
English Important Product Safety Instructions Follow and obey all warnings and instructions marked on the HD Video Monitor. For your safety, please read all the safety and operating instructions before you operate the HD Monitor Keep this user’s manual for future reference. Overloading Do not overload wall outlets, extension cords, or power strips. This can result in fire or electronic shock. Power Cord Protection Power supply cords should be routed so that they are not likely t
ページ5に含まれる内容の要旨
English 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use the HD Monitor near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not attempt to bypass the safety purpose of th
ページ6に含まれる内容の要旨
English Safety Guidelines CAUTION: The power supply outlet should be located near the HD Monitor and should be easily accessible. Always use the appropriate AC cord that is certified for your specific country. Some examples are listed below: USA..................UL Switzerland ..... SEV Canada.............CSA Britain............. . BASE/BS Germany..........VDE Japan ............... Electric Appliance Control Act IMPORTANT NOTICE CONCERNING POWER CORD SELECT
ページ7に含まれる内容の要旨
English Cleaning the HD Video Monitor • MAKE SURE THE HD Monitor IS TURNED OFF • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2. If it still is
ページ8に含まれる内容の要旨
English INSTALLATION Package Contents Your product package includes: • LVM-42w2 (42”) / LVM47-w1 (47”) Westinghouse HD Video Monitor • Remote Control (with batteries) • Power Cord • Quick Connect Guide • User’s Manual • Warranty Card 6
ページ9に含まれる内容の要旨
English Front View of the HD Video Monitor Use the buttons on the right side of the HD Monitor or on the remote control to display the On Screen Display (OSD). The OSD controls are defined in “OSD Functions” on page 12. “IR” receiver and LED indicator Speakers Rear View of the HD Video Monitor 7
ページ10に含まれる内容の要旨
English Side View of the HD Video Monitor 1. Menu Turn OSD Menu ON/OFF Increase/Decrease sound volume or 2. Volume + / - adjust a highlighted control while in the OSD Menu. 3. OSD Selection / Highlight a control while in the OSD Menu. Select Active Video Input or choose a 4. Input selection while in the OSD MENU. 5. Power Button Turn Power ON/OFF 8
ページ11に含まれる内容の要旨
English Side View of the HD Video Monitor 1. DVI2 (Supports up to 1080p Full HD) Using a 20-pin DVI cable, connect to a computer, HD Digital cable/satellite receiver, HD Set-Top-Box, DVD or other device with a DVI output. 1 2. DVI2 Audio Input (Right / Left) Connect an external DVI audio source to this jack. 3. HDMI Input 2 Connect to an external video device such as HD Digital cable/satellite receiver, HD Set-Top-Box, Media Center PC, or DVD player. 4. HDMI Audio Input (Right / Le
ページ12に含まれる内容の要旨
English Remote Control The Remote Control will transmit to the HD Monitor up to 10 feet away. 1. POWER: Switch the power On/Off 2. INPUT Select input source 3. OSD SUB-MENU SELECTION Select OSD sub-menu option directly 4. PREVIOUS OSD MENU Select previous OSD menu 5. MENU/EXIT Turn OSD Menu On/Off. 6. SCALING Select Video Display format “STANDARD” or “FILL” 7. / / / OSD MENU control 8. Enter Execute a command 9. MUTE Turn the Sound On/Off 10. INFO Display t
ページ13に含まれる内容の要旨
English Installation 1. Insert Remote Control Batteries 1) Remove the battery cover. 2) Insert the batteries corresponding to the (+) and ( −) marks on the battery compartment. 3) Re-attach the battery cover. CAUTION: Only use AAA batteries. Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. Insert batteries according to (+) and ( −) markings. Inserting the batteries incorrectly may
ページ14に含まれる内容の要旨
English 2. Connect audio and video cables from a PC Connect one or all of the following into the back of the HD Monitor IMPORTANT: Before beginning, make sure all devices are turned off. VGA CONNECTION: Connect an analog VGA cable from your PC VGA OUT port to the HD Monitor VGA IN port. DVI1/DVI2 CONNECTION: Connect a Digital DVI cable from your PC DVI OUT port to one of the HD Monitor DVI-HDCP port. AUDIO CONNECTION: Connect a stereo mini cable from the PC’s AUDIO OUT port
ページ15に含まれる内容の要旨
English 4. Connect power cables Connect the power cord to the HD Monitor then to a properly grounded AC outlet. 5. Turn Power On Press the Power ON button on the right side of the HD Monitor, or press the Power ON (Red) button on the remote control. 6. Select input source for the HD Monitor using the OSD menu or remote control 7. If connecting to a PC (VGA/DVI1/DVI2): For the best picture quality, set the HD Monitor resolution to 1920 x 1080 at 60Hz (refer to the grap
ページ16に含まれる内容の要旨
English OSD Function All the OSD function settings are controlled either by the remote control or using the control keys on the right side of HD Monitor. To display the OSD main menu, press the Menu button on the right side of front control keys of the HD Monitor or the MENU key on the remote control. Use 3/ 4 arrow keys to highlight the desired OSD sub-menu. Main Menu To select a sub-menu, press ▲/▼ on the right side of the HD Monitor or the ▲/▼ key on the remote control.
ページ17に含まれる内容の要旨
English PICTURE PARAMETERS: Function Name Function Brightness Brightness adjustment Contrast Contrast adjustment Saturation Saturation adjustment Hue Hue adjustment Color Temp Color temperature adjustment (Warm, Neutral, Cool) Sharpness adjustment Sharpness (Sharpness cannot be adjusted in PC mode) Aspect Ratio Set display to “STANDARD” / “FILL” Backlight Backlight adjustment Reset Reset video settings 15
ページ18に含まれる内容の要旨
English PC PARAMETERS: Function Name Function Auto Adjust Automatically adjust the horizontal phase of the image Clock Clock adjustment Phase Phase adjustment Position Adjust the horizontal and vertical position of the image NOTE: The GRAPHIC menu is only available when VGA source is selected. 16
ページ19に含まれる内容の要旨
English AUDIO SETTINGS: Function Name Function Volume Volume adjustment Bass Bass adjustment Treble Treble adjustment Balance Balance adjustment Mute Select Audio OFF or ON Speaker Select internal or external speaker Reset Reset audio settings 17
ページ20に含まれる内容の要旨
English PICTURE-IN-PICTURE: Function Name Function Display Mode OFF --> PIP --> PBP --> POP Main Source Select main screen sources VGA --> DVI1--> DVI2 --> AV --> S-Video--> YPbPr1 --> YPbPr2 --> HDMI PIP Source Select sub screen sources Please see PIP/PBP/POP specification in Table 1 Swap Swap main screen and sub-screen source PIP Position Sub-screen display horizontal/vertical position adjustment Sub-screen display size adjustment PIP Size (Small -->Medium --> Large)
