Grizzly Air Filter/ Regulator/ Lube with Gauge H3258の取扱説明書

ページ1に含まれる内容の要旨

Model H3258
Air Filter/ Regulator/ Lube
with Gauge
1
When installed in an air system, the Model H3258 5. Connect the air line (A) to the line-IN ⁄4" NPT
removes micro-particles and moisture droplets, lubri- threads (B) on the Model H3258 as shown in
cates your air tools, and regulates air flow. Figure 2. Note—Use as short of an air line
as possible, with minimal bends, to maintain
an accurate working pressure.
INSTALLING REGULATOR
6. Thread on a male connector (D) to the Line
“OUT” threads (C)

ページ2に含まれる内容の要旨

3. Before filling the oil reserve, release all air ADJUSTING REGULATOR pressure in the tank and lines, then remove the cap screw above the oil reservoir shown in Figure 4. To adjust the regulator air pressure on the Model H3258: 4. Fill the oil cup between the minimum and max- imum level marks on the side of the bowl. 1. When the air tank has reached operating pres- sure, pull the regulator knob on the Model 5. Replace the cap screw. H3258 up to unlock it (Figure 3). Needle Valve 2. Turn the kno