Harbor Freight Tools 93341の取扱説明書

ページ1に含まれる内容の要旨

TRAILER
SPARE TIRE CARRIER
93341
ASSEMBLY & OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
©
®
Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical

ページ2に含まれる内容の要旨

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ Serial No._____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. The Trailer Spare Tire Carrier fits most trailer tongues up to 3” wide and 4” high. Will accept both 4 and 5 lug wheels. Easily mounts the spare t

ページ3に含まれる内容の要旨

10. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Non-Skid footwear is recommended when assembling and when using the Spare Tire Carrier. Wear restrictive hair covering to contain long hair. 11. Do not force this product. Do not use inappropriate attachments in an attempt to exceed the capacity of the Spare Tire Carrier. 12. Keep children away. Children must never be allowed in the work area. 13. Make certain that no persons or pets are under t

ページ4に含まれる内容の要旨

Installation 1. Secure the unloaded trailer with wheel chocks (blocks) on a hard, flat surface capable of supporting the weight of the trailer, Trailer Spare Tire Carrier and required tools. 2. Raise the trailer tongue and secure it with two supports, one on each side of the trailer tongue. 3. Position the Mounting Bracket (2) in the correct location against the side of the trailer tongue. Note: The spare tire will be located to the side of the trailer tongue. Note: The angled Tire Mounting Pl

ページ5に含まれる内容の要旨

Parts List Part # Description Quantity Part # Description Quantity 1 Mounting Bar 2 5 Nylon Lock Nut 2 2 Mounting Bracket 1 6 Nut 4 3 Hex Bolt 4 7 Spring Lock Washer 4 4 Round Head Bolt 2 8 Washer 4 Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. Parts Assembly Diagram 1 4 3 Tire Mounting Plate 5 Trailer 8 2 7 Tongue Plate 6 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS