ページ1に含まれる内容の要旨
Ring Toss Game
Recommended for families with children ages 8-10
STEP-BY-STEP PROJECT PLANS
WHAT YOU’LL NEED:
Materials Tools
• One 1x2x6 pine board
• Drill press with 3/4” forstner bit
• One hardwood dowel,30” in length and 3/4” diameter
• Circular saw or jigsaw
• Three 1/2” diameter ropes,16” in length
• Sander
• Woodworking glue
• Four 6” clamps
• 10 drywall screws, 1-1/4” length
• Speed square
• Three 1/2” copper couplings
• Paintbrush
• Construction adhesive
• Candle and matches (to fuse
ページ2に含まれる内容の要旨
Ring Toss Game Recommended for families with children ages 8-10 3/4" x 5" (x5) 7-1/4" 3/4" x 5" (x5) STEP-BY-STEP PROJECT PLANS 3/4" x 5" (x5) 7-1/4" 7-1/4" 3/4" x 5" (x5) 7-1/4" 1 INSTRUCTIONS: Cut pine into two 16” long stripsand four 1 7-1/4” long strips. 16" 3/4" x 5" (x5) 2 Cut five 5” lengths of the dowel. 7-1/4" 16" 2-1/2" 2 16" Using diagram at right, set up the pieces 3 5-1/2" 2-1/2" of the base on your workbench. 5-1/2" 16" 7-1/4" 5-1/2" 8-1/2" Measure and mark where the 10 screws
ページ3に含まれる内容の要旨
3/4" x 5" (x5) 7-1/4" 16" 2-1/2" 5-1/2" 2-1/2" 5-1/2" 7-1/4" 5-1/2" 8-1/2" 2-1/2" 5-1/2" 2-1/2" Ring Toss Game Recommended for families with children ages 8-10 INSTRUCTIONS: 1-1/2" 7 Paint and coat with polyurethane before assembling. After paint dries, glue dowels into place using wood glue. 8 9 Cut three 10” lengths of rope, using candleto 8 fuse each end and prevent fraying. Push each end of rope halfway through copper coupling, 9 using construction adhesive to secure. A B C D E 3