SkyLink 318KRの取扱説明書

ページ1に含まれる内容の要旨

®
Skylink Wireless
Keyless Entry for Garage Doors Model 318KR
1. INTRODUCTION
2. INSTALLATION (CONT)
Plug in the connector end of the Red/Black wire to the 318R
In this package, you will find a keyless entry transmitter with 3V lithium
2
batteries, a garage door receiver, a red / black wire and a clip. receiver. Note the orientation of the male & female connector.
Clip
Garage Door
Receiver
Keyless Entry Transmitter
Red/Black Wire
(Batteries inside)
3 Plug the receiver into an electrical outl

ページ2に含まれる内容の要旨

4. CHANGE THE OPERATION CODE FOR 6. CHANGE PIN BOTH TRANSMITTER AND RECEIVER (BOTH) Follow the instructions below to change the PIN. To change your PIN: You can randomly remove some 1. Enter the current PIN, (factory default PIN 0 0 0 0), press , 2 * 2. Enter new 4 digit PIN, press , connectors, leaving some in place. * 3. Enter new PIN again, press . A connector can be removed with * the clip, as shown. For example, if you are changing the PIN number from 0000 to 1234, enter th