ページ1に含まれる内容の要旨
Setup Guide
HU-318
skylinkhome.com
ページ2に含まれる内容の要旨
CONTENTS 1. Setup HU-318 1.1 Obtain the IP address of HU-318............... 3 1.2 Login HU-318 Main Page.......................... 4 1.3 HU-318 Network Setting............................ 5 1.4 Setup Portforward......................................6 2. Setup App 2.1 App Download........................................... 7 2.2 App Network Settings................................ 8 2.3 Zone Settings.............................................9 2.4 Device Settings.....................
ページ3に含まれる内容の要旨
1.1 OBTAINING THE IP ADDRESS OF HU-318 SETUP HU-318 1. Connect the ethernet cable to the HU-318 hub and to your router 2. Connect the power adaptor to the outlet and to the HU-318 hub 3. You will see your IP address as well as the port number on the HU-318 > 192.168.x.xx:8081 192.168.002.036:8081 192.168.0.14:8081 Example 1.1 SETUP HU-318 3
ページ4に含まれる内容の要旨
1.2 LOGING INTO THE HU-318 MAIN PAGE SETUP HU-318 1. Open the browser on your desktop and input your IP address http://192.168.x.xx:8081 Omit the zeros from your IP address shown on the hub to the following format: example http:192.168.002.036:8081 X to http:192.168.2.36:8081 2. Input the default user name admin and default password admin admin admin 4. Scroll down and click on 3. Click on “Settings” icon “Network Settings” 1.2 SETUP HU-318 4
ページ5に含まれる内容の要旨
1.3 HU-318 NETWORK SETTINGS SETUP HU-318 1. Ensure the DDNS Status is OK. If it states Fail, Check your internet access DDNS Status : OK 2. Uncheck the DHCP Client and Click on “Save Config” “Uncheck” 3. Now the HU-318 is rebooting 1.3 SETUP HU-318 5
ページ6に含まれる内容の要旨
1.4 SETUP PORTFORWARD SETUP HU-318 If you want to control your devices/appliances outside your wifi-network, you need to set up PORT FORWARDING on your Router! To do this visit http://www.portforward.com and enter the router brand and model found at the back of your router, into the search engine. On the returned page, click on the hyperlink “Default Guide” and follow the step by step guide. 1.4 SETUP HU-318 6
ページ7に含まれる内容の要旨
2.1 APP DOWNLOAD SETUP APP 1. On your iphone, go to the App Store, 1. On your smartphone, go to the App and search “skylink homecontrol” Store, and search “skylink home” 2. Install the Skylink App 2. Install the Skylink App 3. Run the App 3. Run the App 2.1 SETUP APP 7
ページ8に含まれる内容の要旨
2.2 APP NETWORK SETTINGS 1. Tap on “Settings” 2. Tap on “Network Settings” 3. Tap on “1” 4. Enter the following information: 1 2 3 4 5 6 7 1. Profile: Home 5. Tap on “Back” 2. IP Address: xxxxx.my.skyhm.net or 192.168.x.xx (If you didn’t setup DDNS) 3. Port: 8081 4. User name: admin 5. Password: admin 6. Enabled: ON 7. Tap “Save” 2.2 SETUP APP 8
ページ9に含まれる内容の要旨
2.3 ZONE SETTINGS SETUP APP 1. Tap on “Zone Settings” 2. Tap on one of the “Unused” buttons 3. Enter Your Zone Name: eg. Master Room 4. Tap on “Back” and Tap on “Rename” 1 Zone Name: eg. Master Room, Living Room 2 Tap on “Rename” to Save 2.3 SETUP APP 9
ページ10に含まれる内容の要旨
2.4 DEVICE SETTINGS SETUP APP 1. Tap on 2. Tap on 3. Tap on one of the “Device Settings” your zone “Unused” buttons 4. Enter Your Device Name and 5. Select either ON/OFF or Tap on “Return” No-Dim/Dim and tap on “Add” Device Name: eg. Bed Light, eg. Table Lamp 7. Put your skylink receiver into 6. Tap on the Button you created programming mode and Tap on “Learn” To set your skylink receiver into programming mode please refer to page 18 of this guide. After Programmed, Tap on “
ページ11に含まれる内容の要旨
2.5 SCENE SETTINGS SETUP APP 1. Tap on “Settings” 2. Tap on “Scene Settings” 3. Tap on one of the 4. Enter your Scene Name and “Unused” buttons tap “Rename” Scene Name: 1 eg. Movie, eg. Evening 2 Tap “Rename” to Save 5. Tap on your “Scene Name: eg.Movie” 6. Tap on “Zone” 2.5 SETUP APP 11
ページ12に含まれる内容の要旨
2.5 SCENE SETTINGS SETUP APP 7. Select your zone name Tap “Done” 8. Tap on “Device” Tap “Done” 2 Select 1 Zone 9. Select your Device, and Tap “Done” 10. Tap on “Brightness” Tap “Done” 2 Select 1 Device eg. Wall Lamp 11. Select “% Brightness” Tap “Done” 12. Tap on “Set” Select 100% to turn off dimming function Tap “Done” 2 Select 1 % Brightness 2.5 SETUP APP 12
ページ13に含まれる内容の要旨
2.5 SCENE SETTINGS SETUP APP 13. Set your Device into programming mode and Tap “Learn” to program Tap on “Learn” 1 To set your skylink receiver into programming mode please refer to page 18 of this guide. 2 After Programmed, Tap on “Home” 14. To add more devices to the same scene, repeat scene settings: steps 5-13 15. Tap on “Scene” 16. Tap icons to control the device, ON/OFF switch ON OFF 2.5 SETUP APP 13
ページ14に含まれる内容の要旨
2.6 TIMER SETTINGS SETUP APP 1. Tap on “Settings” 2. Tap on “Timer Settings” 3. Tap one of the “Unused” buttons 4. Enter your Timer Name Timer Name: eg. Timer1 eg. NIght 6. Tap on “Zone”, Select your zone and 5. Tap on “Return” to Save the name Tap “Done” to save 1 1. Tap “Zone” 2. Select 3 from list 3. Tap “Done” to Save 2 2.6 SETUP APP 14
ページ15に含まれる内容の要旨
2.6 TIMER SETTINGS SETUP APP 8. Tap Device, Select your Device from the List and Tap “Done” to Save 7. Tap “Device” 1. Select Device: eg. Wall Lamp 2 2. Tap “Done” to Save 1 9. Tap Hour, Select your Hour 10. Tap Minute, Select your Minute from the List and Tap “Done” to Save from the List, Tap “Done” to Save 1. Tap Hour 1. Tap Minute 1 1 2. Tap to Select 2. Tap to Select 3 Hour amount: 3 Minute amount: eg.01 eg.00 3. Tap “Done” 3. Tap “Done” 2 2 to Save
ページ16に含まれる内容の要旨
2.6 TIMER SETTINGS SETUP APP 13. Tap on “On” or “Off” depending on 14. Tap on the “Add” button your desired action to add your timer 1. Select 2 “On” or “Off” 2. Tap “Done” to Save 1 15. Tap on your Timer name 16. Tap on Activate Icon 17. Timer is now active The above example now has Timer1 Set for: Wall Lamp to turn ON in Demo Zone, Monday-Fridays at 1:00am 2.6 SETUP APP 16
ページ17に含まれる内容の要旨
OPERATION 1. Tap on the “Zone” button 3. Tap on the Zone you want to control 4. Tap on the device you want to control and use the 4 buttons below to control ON OFF BRI DIM OPERATION 17
ページ18に含まれる内容の要旨
PUTTING RECEIVER INTO PROGRAMMING MODE Mini Screw-In Dimmer On/Off & Dimming Control Model: LS-318 Model: MD-318 Start with dimmer off. Position the slide switch Start with dimmer off; Power on the dimmer to the desired operating mode. Power on (by turning on light switch or the circuit (by turning on the light switch or the circuit breaker), you will hear a beep from the MD- breaker). The LED will flash quickly for Regular 318 indicating unit is now in programming On/Off mode, slowly for
ページ19に含まれる内容の要旨
ページ20に含まれる内容の要旨
Wireless Control Everywhere. skylinkhome.com
