ページ1に含まれる内容の要旨
Gas Barbecue
Use, Care & Assembly Manual
With Grill Lighting Instructions
8450 Series
Model No. 9992-649 (Natural Gas)
ASSEMBLER/INSTALLER:
Leave these instructions with the consumer.
CONSUMER/USER:
Read all instructions and keep in a safe place for future reference.
www.coleman.com For Outdoor Use Only
IMPORTANT
Read this manual carefully before assembling,
using or servicing this grill. Keep this manual for
NOTE:
1) AA Battery is included.
future reference. If you have questions about
2) A fle
ページ2に含まれる内容の要旨
Contents DANGER DANGER indicates an imminently hazardous situation which, if not General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 avoided, will result in death or serious injury. General Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 LP Fuel Connections Other Than Po
ページ3に含まれる内容の要旨
WARNING � DO NOT move grill while it is lit. � Keep outdoor cooking gas appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids. WARNING � NEVER place more than 15 pounds on a side table or a side burner. DO NOT lean on grill. � NEVER use charcoal briquettes or lighter fluid in a gas grill. � Grill is hot when in use; to avoid burns, DO NOT touch any hot grill surface. Keep children and pets away from hot grill. � NEVER leave the grill u
ページ4に含まれる内容の要旨
Electrical Attachments Natural Gas Connections WARNING When using an electric attachment with the grill, follow the specification and warning statements accompanying the attachment. � Gas supply system must be installed in accordance with the U.S. IMPORTANT: If using an external electrical source, the installed National Fuel Gas Code. appliance must be electrically grounded according to local codes or, � This appliance and its individual shut off valve must be disconnected in the absence of loca
ページ5に含まれる内容の要旨
Grill Features — 8450 Series 14 13 2 3 1 4 5 12 6 7 11 7 10 9 8 1. Grill Hood 8. Convection Vents 2. Thermometer 9. Control Knobs: Main Burners 3. Hood Handle 10. Electronic Igniter: Left Main Burners 4. Side Burners and Rear Infrared Burner 5. Control Knobs: Side Burners 11. Control Knob: Rear Infrared Burner 6. Electronic Igniter: Right Main Burners 12. Grilling/Cooking Surface and Side Burners 13. Rear Infrared Burner 7. Drip Trays 14. Warming Shelf NOTE: See your dealer for a Rotisserie Kit
ページ6に含まれる内容の要旨
Replacement Parts List — 8450 Series Grill Rotisserie Kit (not shown) Grill Gas Conversion Kit (not shown) 9992-557 8450 Series Grill Rotisserie Kit 9992-269 8450 Series NG to LP Conversion Kit 6
ページ7に含まれる内容の要旨
Built-In Instructions — 8450 Series WARNING The 8450 Series grill can be installed as a built-in grill. If installed as a built-in grill, the outdoor cooking center must be constructed of non-combustible material. PLANNING AND DESIGN Start by identifying the number and size of components you want to include in your outdoor cooking center. Countertops must be constructed of non-combustible, outdoor-safe materials. Consider outdoor lighting to illuminate after-dark grilling. For assistance in desi
ページ8に含まれる内容の要旨
27 1/2” Minimum Built-In Instructions — 8450 Series Note: Make Sure To Use Non-Combustible Material For Construction GFI electrical outlet for rotisserie motor (6.5 Amp Min.) A C B Open space Minimum clearance to open hood 5” 1.50” 35.5” Max 0.75” 0.75 Max Max 1.440 Max Top View 8450 Series Grills Built-In Dimensions With trim kit Without trim kit A 57 3/8" A 57 1/2" B 25 1/8" B 25 1/2" C 13" C 13" Additional Requirements: • If using a backsplash apron or rear wall, locate electrical service on
ページ9に含まれる内容の要旨
Natural Gas Installation — 8450 Series NOTE: Your 8450 Series grill is set up from the factory to use NATURAL GAS. If you want to use LP GAS, you must purchase the LP GAS CONVERSION KIT (sold separately). Please skip to the section titled “LP Cylinder Conversion - 8450 Series ”. WARNING Never attach an unregulated gas line to the appliance. Connection to an unregulated gas line can cause excessive heat or fire. YOUR NATURAL GAS COMPANY MUST INSTALL AND CONNECT THE GAS SUPPLY LINE TO THE GRILL. G
ページ10に含まれる内容の要旨
Grill Assembly — 8450 Series IMPORTANT: Remove all protective plastic film from stainless steel parts prior to assembly/use. This film is installed at the factory to prevent damage that could occur during shipment and handling. NOTE: Some of the illustrations in this manual apply to more than one grill model. Features such as the cart, doors, and side tables, are not provided with the 8450 Series grill. Interior Parts Installation Fig. 1 Insert the row of six heat tents with the triangle ridges
ページ11に含まれる内容の要旨
Grill Assembly — 8450 Series Side Burner Installation Fig. 6 Install the burners and caps (Fig. 6 and Fig. 7). 1. Fig. 7 Install the grate over the burners (Fig. 8). 2. Fig. 8 Igniter Battery Installation Fig. 9 The AA battery, spring and igniter cap must be installed before 1. using (Fig. 9). Install the AA battery, negative end first. 2. Slide the spring assembly over the battery. 3. Screw the igniter cap onto the igniter (Fig. 10). 4. Fig. 10 Test the Igniter: A spark should appear at electro
ページ12に含まれる内容の要旨
LP Cylinder Conversion — 8450 Series NOTE: This step applies to you only if you are converting your 8450 Series grill to use LP GAS. If you will be using your grill with NATURAL GAS, this section does not apply to you. Please skip back to the section titled “Natural Gas Installation - 8450 Series ”. The 8450 Series grill is set up from the factory to use NATURAL GAS. If you want to use LP GAS, you must purchase the LP GAS CONVERSION KIT (sold separately). Follow the installation instructions pro
ページ13に含まれる内容の要旨
Portable L.P. Gas Barbecue Cylinders L.P. Gas Cylinder Liquefied Petroleum gas (abbreviated L.P. gas or propane), is highly flammable. It becomes liquid when stored under high DANGER pressure inside a cylinder and vaporizes when released. L.P. gas � DO NOT insert any foreign objects into the valve outlet. You is heavier than air and tends to collect in low areas. It is important may damage the valve. A damaged valve can cause a leak, that there are no leaking connections on your gas grill that c
ページ14に含まれる内容の要旨
Transporting the Cylinder (continued) CAUTION Have the gas dealer weigh the cylinder after filling to ensure that the cylinder is not over filled. WARNING Handle a full cylinder with care. Gas is under high pressure. Hose and Regulator DANGER The Type 1 connection system has the following features: 1. The system will not allow gas to flow until a positive connection � NEVER store a spare L.P. gas supply cylinder under the grill has been made. body or inside the grill enclosure or in the vicinity
ページ15に含まれる内容の要旨
Filling and Purging Type 1 Connecting Type 1 L.P. Gas Cylinders L.P. Gas Cylinders (continued) WARNING Fig. 17 This procedure MUST be performed OUTDOORS only! Be CGA-510 POL sure the L.P. cylinder valve is closed. Attach to the grill. Read and follow the directions on the cylinder and fuel hose safety tags. CAUTION In the connection process, the grill side of the connection will seal on the back-check in the valve, resulting in a slight resistance. The connection requires about one-half to three
ページ16に含まれる内容の要旨
Leak Testing Fixing A Fuel Leak � If you detect a leak: DANGER 1. Turn off the fuel supply. Push in and turn on the control knobs to release pressure in the hose, then turn the control knobs TO PREVENT FIRE OR EXPLOSION HAZARD: back to off. � NO SMOKING. DO NOT use or permit sources of ignition 2. Wash off soapy solutions with cold water and towel dry. in the area while doing a leak test. 3. Stop a leak by tightening the loose joint, or by replacing the � Perform leak tests outdoors only. faul
ページ17に含まれる内容の要旨
Start-Up Check List Lighting Instructions WARNING WARNING THE FOLLOWING RULES MUST ALWAYS BE Failure to follow these safety steps before using the grill each FOLLOWED IN THIS ORDER (Fig. 22): time could result in a fire that could be hazardous to you, your appliance or property. It is especially important to observe 1. OPEN THE GRILL LID! Any attempt to light the grill with these steps after the grill has been stored, moved or cleaned. the lid down could cause an explosion. 2. Check that the
ページ18に含まれる内容の要旨
Fig. 24 Lighting Main Burners 1. Push and turn one of the three left main burner control knobs counterclockwise to the “HIGH” position. Wait 5 seconds. (Fig. 23, 24, and 25) 2. Press and hold the left electronic igniter button. You will hear a snapping sound. (Fig. 25) 3. If the burner does not light in 4 seconds, turn the control knob to OFF and wait 5 minutes for the gas to clear before trying again. 4. Repeat steps 1 through 3 to light the remaining burners. NOTE: The right main burners are
ページ19に含まれる内容の要旨
Using the Rotisserie — 8450 Series NOTE: Your 8450 Series grill is set up from the factory with a Back Infrared Burner. An optional ROTISSERIE KIT to use with the back infrared burner must be purchased separately. The grill rotisserie system is designed to cook items from the back using infrared heat. The rotisserie burner is an infrared type which provides intense searing radiant heat. Preferred by chefs over other cooking methods, this intense heat sears in the natural juices and nutrients fou
ページ20に含まれる内容の要旨
Lighting the Rotisserie Burner 1. Push and turn on the control knob for the ROTISSERIE BURNER counterclockwise to the Fig. 31 “HIGH” position (Fig. 31 and 32). Wait 5 seconds. 2. Press and hold the electronic igniter button (Fig. 32). You will hear a snapping sound. 3. If the burner does not light in 4 seconds, turn the control knob to OFF and wait 5 minutes for the gas to clear before trying again. 4. Repeat steps 1 through 3. 5. Once lit, turn the control knob to the desired setting. 6. If the
