ページ1に含まれる内容の要旨
Bluetooth GPS Unit
VGP-BGU1
Operating Instructions
Printed on 70% or more recycled paper
using VOC (Volatile Organic Compound)-
free vegetable oil based ink.
http://www.sony.net/
2006 Sony Corporation / Printed in Japan
2-691-136-12 (1)
ページ2に含まれる内容の要旨
The shielded interface cable recommended in this manual must be used with this equipment in order to WARNING comply with the limits for a digital device pursuant to subpart B of Part 15 of the FCC Rules. To reduce the risk of fire or You are cautioned that any changes or modifications electric shock, do not expose this not expressly approved in this manual could void your authority to operate this equipment. apparatus to rain or moisture. For questions regarding your product or for the Sony To a
ページ3に含まれる内容の要旨
RECYCLING LITHIUM-ION BATTERIES Table of Contents Lithium-Ion batteries are recyclable. You can help preserve our environment by Overview ............................................... 4 returning your used rechargeable batteries to the collection and recycling location nearest you. Supplied Accessories ............................. 5 For more information regarding recycling of Location ................................................. 6 rechargeable batteries, call toll free 1-800-822- 8837, o
ページ4に含まれる内容の要旨
Overview This unit is a GPS (Global Positioning System) receiver for calculating your current geographic location. This unit’s features the following: • When you connect this unit to a personal computer with the Bluetooth connection, the present position is displayed on the map of the “Street & Trips” software which is preinstalled on the personal computer. • If you use the “VAIO Camera Capture Utility” software* which is preinstalled to the personal computer, you can mark the location on the st
ページ5に含まれる内容の要旨
Supplied Accessories After unpacking the unit, make sure that the accessories listed below are present. If anything is missing, contact the Sony dealer where you purchased this product, or a Sony service representative in your area. • Bluetooth GPS unit (1) • AC adapter (1) • AC power cord (1) • Strap belt (1) • Operating Instructions (this document) (1) • Warranty Card (1) 5 VGP-BGU1_2-691-136-12(1)
ページ6に含まれる内容の要旨
Location 1 GPS status indicator Lights up green depending on status. Lights up: While receiving the positioning data Flashing: While measuring Off: GPS functionality is not activated. 2 Battery status indicator Lights up red depending on status. Lights up: While charging the battery. When charging completes, this indicator goes off. Flashing: Low battery (Remaining battery is not enough.) Charge the battery of the unit (page 8). 3 Bluetooth status indicator Lights up blue depending on status. Li
ページ7に含まれる内容の要旨
To use the strap belt You can attach the unit the following illustration as below. Clasp Attach the unit to the belt loop of the bag as follows. 1 Remove the clasp from the strap belt. 1 2 2 Attach the unit to the strap belt with touch fastening tape. 3 Put the belt strap with button face up through the belt loop ( ) and fasten the button ( ). 1 2 1 2 7 VGP-BGU1_2-691-136-12(1)
ページ8に含まれる内容の要旨
Charging the Battery You need to charge the battery of the unit when you use the unit at the first time, or when the battery status indicator flashes. Connect the AC adapter to the DC IN (!) connector of the unit, connect the AC power cord to the AC adapter, and then plug the AC power cord into an AC outlet. When battery charging starts, the battery status indicator lights up red. Battery charging is complete when the indicator goes off. To AC outlet Note While charging the battery, Bluetooth or
ページ9に含まれる内容の要旨
Connecting the Unit to a Personal Computer Notes • Do not use the unit in an airplane as it may interfere with aircraft functions. • This unit cannot receive GPS satellite signals indoors or in a tunnel. • GPS satellite reception is more effective in open areas free of obstructions. • The maximum available reception distance from the unit to a personal computer is approximately 10 m, although this may vary considerably, depending on the environment of use. If the reception is poor, do the follow
ページ10に含まれる内容の要旨
4 Click “New Connection”. The “Add New Connection Wizard” screen appears. 5 Click “Next”. The personal computer starts searching for the Bluetooth devices. When searching has finished, the “Select a device” screen appears and “VGP-BGU1” appears in the device list. If “VGP-BGU1” does not appear, click “Refresh” to perform the search again. 10 VGP-BGU1_2-691-136-12(1)
ページ11に含まれる内容の要旨
6 Select “VGP-BGU1” and click “Next”. The personal computer starts connecting the unit, and then the “COM port setting” screen appears. COM port, which is set to the unit, appears on the “COM port setting” screen. z Hint When you use the “Street & Trips” software or the “VAIO Camera Capture Utility” software, you need to input the COM port. We recommend making a note of the displayed COM port. z When the “Bluetooth Security” screen appears Enter “2006” in the passkey (PIN code) space, and click
ページ12に含まれる内容の要旨
8 Click “Finish”. The “Add New Connection Wizard” screen closes and “VGP-BGU1” is registered to the “Bluetooth Settings” screen. 9 Right-click “VGP-BGU1” and click “Connect”. The Bluetooth status indicator and battery status indicator of the unit blink together twice. 12 VGP-BGU1_2-691-136-12(1)
ページ13に含まれる内容の要旨
Checking the Current Position You can check your current position using the “Street & Trips” software on your computer. 1 Click “Start”, "All Programs" and then select “Microsoft Street & Trips”. The “Street & Trips” main screen appears. 2 Click “Tools”, “GPS” , and then select “Configure GPS Receiver”. GPS receiver setting screen appears. 3 Select the COM port to which Bluetooth GPS is connected from the “Available ports” list. z To confirm the COM port 1 Click on the task bar. The “Bluetooth
ページ14に含まれる内容の要旨
GPS What is a GPS? GPS (Global Positioning System) is a satellite system for navigational positioning anywhere on the earth. GPS information is derived from 24 satellites (4 satellites in 6 orbits) at approximately 20,000 km. At least 3 satellites receive a signal all the time from anywhere (although the actual number of satellites in use at any one time varies). The GPS receiver obtains and processes the almanac data contained in the satellite signal. The receiver also determines current positi
ページ15に含まれる内容の要旨
When using the unit for the first time When you use the unit for the first time, a search for all GPS satellites will be performed in order for the unit to recognize available GPS satellites and positioning takes time for the first time. When the unit cannot receive satellite signals If you are in the tunnel or basement and therefore out of the reception area for GPS satellites, or near high buildings, trees or other obstructions, no signal will be received, or the current location may be inaccu
ページ16に含まれる内容の要旨
Charging the built-in battery To shorten the time to position, almanac data or other required data can be stored in the built-in memory. When you use the unit for the first time, or have not used the unit for a long time, the memory data may be deleted due to the battery discharging. In this case, charge the built-in battery using the AC adapter. About almanac data To shorten the time to positioning, the unit memorizes the satellites orbit information (almanac data) into the built-in memory. Not
ページ17に含まれる内容の要旨
System accuracy Accuracy of GPS satellites The unit positions automatically when the unit receives the signals from 3 or more GPS satellites. An error margin of ± 10 meters is typical, but possibly as much as two or three hundred meters, depending on circumstances. In this case, the current symbol will differ from the actual current location. For the same reason, the current direction indicated on the personal computer may differ from the actual current location. If you use the unit away from th
ページ18に含まれる内容の要旨
Notes on the Bluetooth devices Precautions • 2.4 GHz frequency is used for a various devices such as a wireless LAN or Bluetooth devices. Notes on the unit For this, Bluetooth devices are designed • Do not place any objects on top of the to help minimize interference from unit. same-frequency devices. However the • Do not allow objects such as clips to get communication speed or available inside the unit. communication distance may vary, or communication may be disconnected. • Do not place the u
ページ19に含まれる内容の要旨
To remove the built-in battery Remove the built-in battery in the following way: 1 Remove the rubber from the bottom of the unit. 2 Remove the screws from the bottom using a Phillips screwdriver. 3 Remove the cover from the bottom. 4 Remove the battery. For details on the battery after removing from the unit or recycle, see page on 3. 19 VGP-BGU1_2-691-136-12(1)
ページ20に含まれる内容の要旨
For customers in Europe Getting Help ❑VAIO-Link. For addresses and numbers, refer to http://www.vaio-link.com/ This section provides information on how For customers in other countries and to get help and support from Sony, and on regions troubleshooting tips for your Bluetooth GPS Unit. ❑VAIO Website provides Frequently Asked Questions and solutions. vaio-online.sony.com/ About Sony’s support options Sony provides several support options for your Bluetooth GPS Unit. When you have questions abou
