ページ1に含まれる内容の要旨
®
dēzl 560
owner’s manual
ページ2に含まれる内容の要旨
© 2011 Garmin Ltd. or its subsidiaries All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provid
ページ3に含まれる内容の要旨
Table of Contents Finding a Location Using Table of Contents the Map ................................. 13 Finding NTTS Services............ 13 Getting Started .................... 1 Using Exit Services.................. 14 Mounting the Device .................. 1 Finding Trucking Points of About myDashboard .................. 6 Interest .................................. 14 Entering a Truck or RV Profile ... 7 Setting a Home Location ......... 14 Acquiring Satellites .................... 7 Abo
ページ4に含まれる内容の要旨
Table of Contents Traffic on Your Route ............... 32 Navigation ......................... 22 Viewing the Traffic Map ........... 32 Map Features While Searching for Traffic Delays .... 33 Navigating ............................. 22 Adding a Subscription.............. 33 Using the Navigation Map ....... 23 About Offers and Viewing Trip Information ......... 24 Advertisements ..................... 34 Viewing the Turn List .............. 25 Viewing the Next Turn ............. 25 Using Tru
ページ5に含まれる内容の要旨
Table of Contents Receiving a Call ...................... 52 Pedestrian Navigation Using the Device During Settings ................................. 63 a Call .................................... 52 Choosing Route Dialing a Point of Interest ........ 53 Preferences ........................... 63 Dialing a Number ..................... 53 Display Settings ....................... 66 Entering Your Phone Language Settings................... 66 Number ................................. 53 Viewing M
ページ6に含まれる内容の要旨
Table of Contents Device Models ......................... 75 Purchasing Additional Maps .... 75 Custom Points of Interest ........ 75 Safety Cameras ....................... 76 Purchasing Accessories .......... 77 Contacting Garmin Product Support ................................. 77 Specifications .......................... 77 Troubleshooting ....................... 78 Index .................................. 80 iv dēzl 560 Owner’s Manual
ページ7に含まれる内容の要旨
Getting Started 4. Enter a truck or RV profile Getting Started (page 7). 5. Acquire satellites (page 7). WARNING See the Important Safety and Product Mounting the Device Information guide in the product box for product warnings and other WARNING important information. This product contains a lithium-ion Before you use your device for the battery. To prevent the possibility of first time, you should complete these personal injury or product damage tasks. caused by battery exposure to
ページ8に含まれる内容の要旨
Getting Started Installing the Portable 3. Slide the locking lever ➎ on the Friction Mount base to the unlocked position. If you are using a portable friction mount, you should follow these instructions. 1. Plug the vehicle power cable ➊ into the mini-USB connector ➋ on the cradle ➌. ➎ ➌ 4. Slide the disk on the bottom ➍ ➊ of the arm into the base until it clicks. ➋ 5. Slide the locking lever to the locked position. 6. Fit the bottom of the device into 2. Snap the cradle onto the arm ➍
ページ9に含まれる内容の要旨
Getting Started Installing the Base 7. Tilt the device ➏ back until it snaps. NOTICE The adhesive pad is permanent and is very difficult to remove after it is ➏ installed. If you move the adhesive pad, use rubbing alcohol to help remove the adhesive residue. 1. Select a mounting location where the device has an unobstructed view of the sky. 8. Plug the other end of the vehicle Ensure the location does not power cable into a power outlet in block the driver’s view. your vehicle. 2. Cle
ページ10に含まれる内容の要旨
Getting Started 4. Remove one side of the Attaching the Device to the Base protective liner from the adhesive Before you use your device on pad ➊. battery power, you should charge it. LOCK 1. Plug the vehicle power cable ➊ LOCK ➋ into the mini-USB connector ➋ ➌ on the cradle ➌. ➊ ➌ 5. Place the adhesive pad on the ➍ ➊ bottom of the mounting base ➋. ➋ 6. Remove the remaining protective liner. 7. Ensure the locking lever ➌ on the mounting base is facing toward 2. Snap the cradle onto the a
ページ11に含まれる内容の要旨
Getting Started 4. Slide the disk on the bottom If you are using a traffic receiver of the arm into the base until it in Europe, you must connect the clicks. external antenna to receive traffic information. 5. Slide the locking lever to the locked position. 1. Connect the external antenna ➊ 6. Fit the bottom of the device into to the traffic receiver ➋. the cradle. ➊ 7. Tilt the device back until it snaps. 8. Plug the other end of the vehicle ➋ power cable into a power outlet in your veh
ページ12に含まれる内容の要旨
Getting Started 3. Keep the original sales receipt, or About myDashboard a photocopy, in a safe place. Use myDashboard to register your device, check for software and map Updating the Software updates, access product manuals and 1. Open myDashboard (page 6). support, and more. 2. If necessary, under Software Updates, click Update Now. Setting Up myDashboard 3. Follow the on-screen instructions. 1. Connect the USB cable to the micro-USB connector ➊ on the ™ nüMaps Guarantee device. Your de
ページ13に含まれる内容の要旨
Getting Started Updating Maps Before you can operate in Truck or 1. Open myDashboard (page 6). RV mode, you must enter your truck or RV profile. 2. Register the device (page 6). 3. If necessary, under Map Updates, Truck transportation mode is selected click Update Now. the first time you turn on your device. You can select Switch Mode 4. Follow the on-screen instructions. to enter an RV profile. Entering a Truck or RV 1. When the warning screen Profile appears, touch Agree. 2. Touch Yes t
ページ14に含まれる内容の要旨
Getting Started 1. Turn on your device. Adjusting the Screen 2. If necessary, go outdoors to Brightness an open area, away from tall 1. Press and quickly release the buildings and trees. Power key. Acquiring satellites can take a 2. Touch and drag the scroll bar. few minutes. When the device has acquired satellite signals, the signal Resetting the Device strength bars on the main menu are You can reset the device if it stops green . When it loses satellite functioning. signals, the bar
ページ15に含まれる内容の要旨
Getting Started Adjusting the Volume • Touch ➊ to select a transportation mode. 1. Touch Volume. • Touch ➋ to find a destination. 2. Select an option: • Touch ➌ to view the map. • Adjust the slider left to right to adjust the volume. • Touch ➍ to stop a route. • Touch to mute all audio. • Touch ➎ to detour a route. • Touch ➏ to make a call when Using the Main Menu connected to a compatible mobile phone. ➊ Go to www.garmin.com ➌ ➋ /bluetooth for information. • Touch ➐ to adjust the volume.
ページ16に含まれる内容の要旨
Getting Started Using the On-screen • Touch to add a space. Buttons • Touch within the field to move the cursor. • Touch to return to the previous screen. • Touch to delete a character. • Touch and to see more • Touch and hold to erase the choices. entire entry. • Touch and hold and to • Touch to select the keyboard scroll faster. language mode. • Touch to search by name. • Touch to enter special characters, such as punctuation Using the On-screen marks. Keyboard • Touch
ページ17に含まれる内容の要旨
Getting Started Transportation Modes Using a Backup Camera If a composite video backup camera Automobile mode has been installed in your vehicle, Truck mode you can view the output of the camera on your device. RV mode Connect the camera to the video- Pedestrian mode in jack ➊ on the cradle. Routing is calculated differently based on your transportation mode. Changing the Transportation ➊ Mode 1. From the main menu, touch the transportation mode icon. 2. Select a mode. The camera output ap
ページ18に含まれる内容の要旨
Searching for a Location 5. Enter the street name, and touch Searching for a Done. Location 6. If necessary, select the street. 7. If necessary, select the address. Finding an Address NOTE: Depending on the version of Using the Location Map the built-in map data on your device, The location map opens after you the button names and the order of select a location from the Where To? steps could be different from the menu. steps below. ➊ 1. From the main menu, touch ➌ Where To? > Address.
ページ19に含まれる内容の要旨
Searching for a Location Viewing a Route on the Map • Touch the information balloon ➋ 1. From the location map, touch the to view more information for the information balloon. location. 2. Touch the route information box. • Touch ➌ to zoom in and out. • Touch ➍ to return to the previous Finding NTTS Services page. The National Truck and Trailer • Touch and drag ➎ to view Services (NTTS) Breakdown different parts of the map. Directory lists businesses for • Touch ➏ to create a turn-by-
ページ20に含まれる内容の要旨
Searching for a Location 1. From the main menu, touch Using Exit Services Where To? > Points of Interest You can find services such as fuel, > Trucking. lodging, and truck stops at upcoming 2. Select a category. highway exits. The device displays available services based on the usage 3. If necessary, select a subcategory. mode. Exit service information 4. Select a destination. is available only on controlled- access roads, such as interstates or Setting a Home Location motorways. You can
