ページ1に含まれる内容の要旨
GPS 76
owner’s
manual
&
reference
guide
covers.indd 1 07/19/01, 1:49 PM
ページ2に含まれる内容の要旨
©2001 GARMIN Corporation GARMIN International, Inc. st 1200 East 151 Street, Olathe, Kansas 66062 U.S.A. Tel. 913/397.8200 Fax 913/397.8282 GARMIN (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ, U.K. Tel. 44/1794.519944 Fax 44/1794.519222GARMIN Corporation nd No. 68, Jangshu 2 Road., Shijr, Taipei County, Taiwan Tel. 886/2.2642.8999 Fax 886/2.2642.9099 All rights reserved. Except as expressly provided herein, no pa
ページ3に含まれる内容の要旨
Registration GPS 76 Registration Help us better support you by completing your on-line registration Introduction today! Registration Why should you register your GPS 76? • Notifi cation of Product Updates • Notifi cation of New Products • Lost or Stolen Unit Tracking Connect to our website (www.garmin.com) and look for the Product Registra- tion link on the home page. Thanks for choosing the GARMIN GPS 76. If you have any questions or com- ments regarding the use of the GPS 76 you can visit our
ページ4に含まれる内容の要旨
WARNING: If you choose to use the GPS 76 in a vehicle, it is the sole responsibility of the owner/operator of the GPS 76 to secure the GPS unit so that it will not cause damage or personal injury in the event of an accident. Do not Introduction mount the GPS 76 over airbag panels or in a place where the driver or passengers are likely to have an impact with it in an accident or collision. Warnings and Cautions WARNING: If you choose to use the GPS 76 in a vehicle, it is the sole responsibi
ページ5に含まれる内容の要旨
NOTE: This device complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE (“home or offi ce” interfer- ence requirements are more stringent than “outdoor” requirements). Operation of Introduction this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Compliance Statement The G
ページ6に含まれる内容の要旨
The GPS 76 is a 7.5 ounce, 12 channel, hand held GPS receiver with a built-in Quad Helix antenna. The GPS 76 has nine keys located on the front of the unit, that allow the user to quickly access all of the units functions. The GPS 76 has a large 180 Introduction X 240 pixel, 4 level gray monochrome display for easy viewing. The GPS 76 is a full function GPS with a factory-loaded Marine point database. Using MapSource™, you can choose to have the GPS 76 display a variety of Points Features
ページ7に含まれる内容の要旨
Introduction....................................1-7 Main Menu Page..........................35-61 Trip Computer.......................35-36 Registration ........................................ 1 Tracks....................................37-38 Warnings and Cautions ...................... 2 Introduction Waypoints .................................. 39 FCC Compliance Statement ............... 3 Creating Waypoints .................... 40 Features.............................................. 4
ページ8に含まれる内容の要旨
TO DO THIS: SEE PAGE(S): Turn the unit on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 12 Initialize the GPS receiver (fi rst time use) . . . . . . . . . . . . . . . . . . . . . 18, 21-22 Introduction Adjust screen contrast or backlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Enter data and select options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15 “How To” Index Learn how to operate the unit’s functio
ページ9に含まれる内容の要旨
Introduction Internal Antenna GPS 76 Unit Features External Antenna Connection Battery Compartment Interface Keys External Data/Auxilary Power Port 180 x 240 Four Level Gray, Backlight Display 7 190-00229-00.indd 7 07/25/01, 11:21 AM
ページ10に含まれる内容の要旨
Please dispose of used batteries properly! Please dispose of used batteries properly! Getting Started Turn D-ring 1/4 turn counter- Installing the Batteries clockwise and remove cover Remove the batteries from your GPS 76 if you don’t expect to use it for several months. Be sure to observe the proper Installing the batteries polarity when inserting the batteries. Follow the battery man- ufacturer’s instructions on the proper care and handling of Installing the batteries: the batteries. 1. Rem
ページ11に含まれる内容の要旨
Getting Started Installing the Lanyard To install the Lanyard: 1. Place the loop of the Lanyard through the slot opening at the bottom of the GPS 76. 2. Route the strap through the loop and pull tight. 9 190-00229-00.indd 9 07/25/01, 11:21 AM
ページ12に含まれる内容の要旨
IN — The Zoom IN Key is used to decrease the map scale. When you decrease the map scale, you will view a smaller area on the map with greater detail. OUT — The Zoom OUT Key is used to increase the map scale. When you Getting Started increase the map scale, you will view a larger area on the map with less detail. Interface Keys NAV / MOB — The NAV Key is used to begin or stop navigation. If the NAV Key is pressed and held down, the GPS stores the current location (a man overboard point)
ページ13に含まれる内容の要旨
This exercise will provide you with the knowledge and skill to navigate the pages and menus of your GPS 76 with confi dence. As we progress through this Owner’s Manual you will often be directed to Getting Started press a specifi ed Interface Key or highlight a fi eld. When you are directed to press a Key, you should press, then release the Key. If the Key needs to be held down for a period of time, the instruction will tell you. The position of the highlight Main Pages is controlled by th
ページ14に含まれる内容の要旨
While learning the basic operation of the GPS 76, let’s put the unit into Simulator Mode. The Simulator Mode is great for practicing with the unit while inside and satellite signals are not available. When the GPS 76 is in Simulator Getting Started Mode, the GPS receiver is turned off (this will help conserve battery power) and the unit cannot be used for actual navigation. Using the Built-in Simulator NOTE: Do not try to navigate using the Simulator Mode. While in the I Simulator Mod
ページ15に含まれる内容の要旨
The Interface Keys are your link with the GPS 76. Let’s take a few minutes and see what some of the Interface Keys are used for. With the GPS Information Page displayed, press the PAGE Key several times. Getting Started Notice that each time you press the PAGE Key the next main page will be displayed. Do the same with the QUIT Key. Notice the QUIT Key acts the same as the PAGE Key except the pages are displayed in a reverse sequence. Press the Using the Interface Keys PAGE Key until the
ページ16に含まれる内容の要旨
There will be many times that you may need to enter data. An example is naming a waypoint. The ROCKER Key is used to navigate through menu items and to enter data. Getting Started Let’s combine a couple of lessons. We will create a new waypoint, enter a waypoint name, and assign a symbol to the waypoint. Entering Data The term ‘Waypoint’ may be new to you. You will fi nd the term Waypoint is used frequently when talking about navigation. A Waypoint is a position stored in the unit’s me
ページ17に含まれる内容の要旨
Changing the name: 1. Press the ROCKER Key right to highlight the Name Field then press the ENTER Key. Getting Started The Name Field will become active and the fi rst zero will be highlighted. Notice that there are now ten placeholders for alpha-numeric characters displayed. 1. Press the ROCKER Key to the left to clear the fi eld. Entering Data 2. Press the ROCKER Key up, scroll through the alpha-numeric list until the letter ‘C’ is selected. 3. Press the ROCKER Key right to move to the
ページ18に含まれる内容の要旨
You should now have enough knowledge to navigate through the main pages, Option Menus and enter data into your GPS 76. Now let’s learn how to navigate! The main use of a GPS is to be able to navigate to a known position. We have Getting Started already created a waypoint and named it CREEK. Let’s create another waypoint on the Map Page using a different method, the Map Pointer. Basic Navigation Press the PAGE Key until the Map Page is displayed. Press the IN Key several times until the
ページ19に含まれる内容の要旨
Going to a waypoint: 1. Press the NAV Key. 2. Highlight ‘Go To Point’ then press the ENTER Key. Getting Started 3. Highlight ‘Waypoints’ then press the ENTER Key. 4. Highlight ‘MAP 1’ then press the ENTER Key. Basic Navigation 5. Highlight the ‘Goto’ Button then press the ENTER Key. The GPS 76 is now navigating to the waypoint MAP 1. For a GPS to navigate, it has to be moving, and fortunately you can simulate movement in the GPS 76. Press the PAGE Key until the Pointer Page is displaye
ページ20に含まれる内容の要旨
Press the ROCKER Key to the left simulating a left turn, until the Pointer is realigned with the vertical line in the Compass Ring. You are now headed toward the waypoint. Getting Started Now that we have now gone through the basic operation of the unit using the simulator, it is time to do some actual navigation! Initializing the GPS 76 To turn off the simulator: 1. With the GPS Information Page displayed, press the MENU Key. 2. Select ‘Stop Simulator’ then press the ENTER Key. Before the G
