ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
R00 Trademarks All brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Specifications and manuals are subject to change without notice. Mio Technology assumes no liability for damage incurred directly or indirectly from errors, omissions, or discrepancies between the device and the manuals.
ページ3に含まれる内容の要旨
Table of Contents 1 Getting Started..................................................................................1 1.1 Understanding Hardware Components................................................ 1 Front Components ............................................................................... 1 Back Components................................................................................ 2 Top Components.............................................................................
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
Warnings and Notices For your safety, do not operate the controls of the product while driving. Use this product with caution. The product is a navigation aid. It does not provide exact measurements of direction, distance, location or topography. The calculated route is for reference only. Always follow the posted traffic signs, speed limits and road restrictions. When you leave your car, do not leave your device on the dashboard in direct sunlight. This can cause the battery to overh
ページ6に含まれる内容の要旨
A device holder is needed when using the device in a car. Be sure to place the device in an appropriate place, so as not to obstruct the driver’s view, or deployment of airbags. Do not mount where the driver’s Do not place on the field of vision is blocked. dashboard unsecured. Do not mount in front of Do not mount in front of an airbag panels. airbag field of deployment. iv
ページ7に含まれる内容の要旨
1 Getting Started 1.1 Understanding Hardware Components NOTE: Depending upon the specific model purchased, the color of your device may not exactly match the device shown in this manual. Front Components Ref Component Description Touch Screen Displays the output of your device. Tap the screen with your stylus to select menu commands or enter information. Charge Indicator Flashes bright amber to indicate that the battery is charging, and turns green when the battery is fully char
ページ8に含まれる内容の要旨
Back Components Ref Component Description ON/OFF Switch The main power/battery cut off switch. Holder Connector Connects to the holder. Speaker Sends out music, sounds and voice. Top Components Ref Component Description Power Button Turns on and off the device. 2
ページ9に含まれる内容の要旨
Bottom Components Ref Component Description Accepts an SD (Secure Digital) or SDHC (Secure SD/MMC/SDHC(Class 2, Class 4, Class 6) Slot Digital High Capacity) or MMC (MultiMedia Card) card for accessing data such as map data. Mini-USB Connector Connects to the USB cable or in-car power cable. Left-side Components Ref Component Description External Antenna This connector (under rubber dust cover) allows use of an Connector optional external GPS antenna with magnetic mount, whi
ページ10に含まれる内容の要旨
1.2 Performing the Initial Start Up 1 Slide the ON/OFF switch to the ON position. CAUTION: Always leave the ON/OFF switch in the ON position for normal operation 2 Your device turns on. 3 Tap and hold the centre of the target. When the target moves to another position, tap and hold the centre of the new target. Repeat each time to complete the calibration process. 4 The “Change Language” screen appears. Tap the left/right arrow button to select the desired language. Then, tap the bu
ページ11に含まれる内容の要旨
1.3 Using Your Device in a Vehicle Using the Device Holder CAUTION: Select an appropriate location for the device holder. Never place the holder where the driver’s field of vision is blocked. If the car’s windshield is tinted with a reflective coating, an external antenna (optional) may be needed to route the antenna to the top of the car through a window. When closing the car window, be careful not to pinch the antenna cable Use the device holder to fix your device in a vehicle. Mak
ページ12に含まれる内容の要旨
1. Connect one end of the car charger to the power connector of your device. 2. Connect the other end to the cigarette lighter in the car to power and charge your device. The indicator on the car charger lights in green to indicate that power is being supplied to your device. CAUTION: For optimal performance of the lithium battery, take note of the following: Do not charge the battery where the temperature is high (e.g. in direct sunlight). There is no need to fully discharge the
ページ13に含まれる内容の要旨
Tap Touch the screen once with your fingertip to open items or select onscreen buttons or options. Drag Hold your fingertip on the screen and drag up/down/left/right or across the screen. Tap and hold Tap and hold your fingertip until an action is complete, or a result or menu is shown. 1.5 Inserting a SD/SDHC/MMC Card Your device has a slot where you can insert an optional SD/SDHC (Class 2, Class 4, Class 6) /MMC storage card. To use a card, insert it into the slot, with the
ページ14に含まれる内容の要旨
ページ15に含まれる内容の要旨
Troubleshooting and 2 Troubleshooting and Maintenance Maintenance 2.1 Reset Your System Occasionally, you may need to reset your device. For example, you should reset your system when it stops responding; or appears to be “frozen” or “locked up.” You can use the following steps to perform a “hard reset.” 1 Disconnect all cables, including the charger, from your device. 2 Slide the ON/OFF switch to the OFF position. 3 Wait for 1 minute and then slide the switch back to the ON position
ページ16に含まれる内容の要旨
2.2 Troubleshooting NOTE: If you encounter a problem you cannot solve, contact an authorized service center for assistance. Power Problems Power does not turn on when using battery power The remaining battery power may be too low to run your device. Charge the battery. Screen Problems Screen responds slowly Make sure that your device is not running out of battery power. If the problem still exists, reset your system. Screen freezes Reset your system. Screen is hard to read M
ページ17に含まれる内容の要旨
Make sure that the cable is securely plugged into the USB port on your computer and on the device. Connect the USB cable directly to your computer—do not run the cable through a USB hub. Reset your device before connecting the cable. Always disconnect your device before you restart your computer. GPS Problems When there are no valid signals available, consider the following: Make sure that the GPS antenna has a clear view of the sky. Note that the GPS reception can be affected by:
ページ18に含まれる内容の要旨
The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches. Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device. Do not use paper towels to clean the screen. Never attempt to disassemble, repair or make any modifications to your
ページ19に含まれる内容の要旨
3 Regulatory Information NOTE: Marking labels located on the exterior of your device indicate the regulations that your model complies with. Please check the marking labels on your device and refer to the corresponding statements in this chapter. Some notices apply to specific models only. 3.1 Regulations Statements European Notice Products with the CE marking comply with Radio & Telecommunication Terminal Equipment Directive (R&TTE) (1999/5/EEC), the Electromagnetic Compatibility Di
ページ20に含まれる内容の要旨
The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may alter the conformity of the product with the CE Marking. 3.2 Safety Precautions Prolonged listening of music in maximum volume can damage the ears. The use of headphones other than those recommended/supplied can cause hearing impairment due to excessive sound pressure. About Charging Use only the charger (UDID, G12PCL-535-B031) supplied with your device. Use of anoth
