ページ1に含まれる内容の要旨
RoyalTek RN1 Portable Navigation Device
Reference Manual
1
ページ2に含まれる内容の要旨
Legal Notices Copyright RoyalTek RN1 Portable Navigation Device User’s Guide Original issue: September 2008. RoyalTek and the RoyalTek logo are registered trademarks of RoyalTek Inc. Other products or system names appearing in this document are trademarks or registered trademarks of their respective owners. Further, the © or TM symbols are not used in the text. Changes may be made periodically to the information in this publication without obligation to notify any person of such revis
ページ3に含まれる内容の要旨
Warnings and Notices For your safety, do not operate the controls of the product while driving. GPS satellite signals cannot typically pass through solid materials (except glass). GPS location information is not typically available inside buildings, tunnels, or underground parking lots. A minimum of 4 GPS satellite signals is needed to calculate your GPS position. Signal reception can be affected by weather events or overhead obstacles (e.g. dense foliage and tall buildings). Other
ページ4に含まれる内容の要旨
FCC Warning The RN1 PND has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device generates, uses, and can radiate radio-frequency energy. If it is not installed and used p
ページ5に含まれる内容の要旨
Table of Contents Chapter 1 Features and Specifications............................................................................7 1.1 RoyalTek RN1 PND features ..........................................................................7 1.2 RN1 Specifications ...........................................................................................7 Chapter 2 Getting Started.............................................................................................9 2.1 Hardware overvi
ページ6に含まれる内容の要旨
5.1.8. Can’t I see my photos.........................................................................30 5.1.9. Takes longer than normal time to get a GPS fix..............................30 5.1.10. Factory reset does mean a GPS reset................................................31 5.2. Maintenance ...................................................................................................31 5.2.1. Storage precautions...................................................................
ページ7に含まれる内容の要旨
Chapter 1 Features and Specifications 1.1 RoyalTek RN1 PND features The RoyalTek RN1 Portable Navigation Device is a powerful multifunction GPS/multimedia navigation and entertainment device. • Compact size and lightweight • Integrated GPS receiver for GPS navigation • High-resolution color LCD • 3.5” wide touch screen with 320 x 240 x 16 bits • Multimedia functionality with high performance processor 1.2 RN1 Specifications Table 1: RN1 dimensions and specifications Categor
ページ8に含まれる内容の要旨
Category Item Battery General 500mA, Li-Polymer Power On (Default setting after factory reset) About 5 hours charge from empty to full. Recharge Time Power OFF About 2.5 hours charge from empty to full. Audio Earphone Yes (option) Speaker 1.0W mono speaker Hardware Button\Slot Micro SD Supports Micro SD Battery switch Yes (hard reset) USB USB solution USB 2.0 device with supporting mass storage( High Speed) 8
ページ9に含まれる内容の要旨
Chapter 2 Getting Started This chapter describes the hardware interface of the RoyalTek RN1 and its peripherals. Instructions for setting up the device and some basic system operations are also discussed. NOTE: Although the RN1 rechargeable Li-Polymer battery comes approximately 30% charged, before using, it is best to connect the AC adapter (Optional Accessory) or USB cable by PC connect and plug to power socket and fully charge the battery. The ON/OFF button will be orange when charging
ページ10に含まれる内容の要旨
USB cable(Option Accessory) Earphone (Option Accessory) AC adaptor (Option Accessory) Dashboard (Option Accessory) TMC Antenna (Optional Accessory). User’s manual DVD./ CD Portable Navigation Device Quick Start Guide. Portable Navigation Device Warranty statement. 10
ページ11に含まれる内容の要旨
2.1.2 Front Panel Figure 1: Top and Left/Rights side views Table 2-1: Top and Left/Right side controls NO Function 1 Power button Standby mode by pressing the button for sleep/wake. Indicated the battery charging status. Green—fully charged or high battery. 2 Power status LED Orange—charging Battery Red—low Battery 3 Accepts Micro SD storage cards, allows you use audio, image files stored Micro SD in it for use with internal applications. 4
ページ12に含まれる内容の要旨
2.1.3 Car holder Figure 2: Car holder side views Table 2-2: Car holder No Function For USB port ： Only serves as the power connector of charging, but mass USB Port/Docking storage function. Also, it can connect to external TMC module (Option 1 connector part). For Docking connector: connects to car mount kit. 12
ページ13に含まれる内容の要旨
2.2 Using the mounting bracket. The RN1 comes with a car mount kit and a car charger to help install your device in your vehicle. The car mount kit uses a suction cup on the windshield to offer flexible mounting options for the RN1. Warning: Some countries prohibit the mounting of any electronic device on the vehicle dashboard. Be sure to check your local laws for acceptable mounting areas before installing the car mount bracket. This section shows how to install the car mount kit in
ページ14に含まれる内容の要旨
Figure 2-3-3 5. Charging your RN1 device. a. Plug the car charger to the 12 V outlet of your car and then connect the charger cable to the Mini USB port of the RN1 car holder ；Please make sure the battery switch status in “ON” mode. (See Figure 2-3-4) b. You now can let your RN1 have the continuous power by the car charger. Figure 2-3-4 NOTE: Your car may be required to switch the vehicle ignition into the accessories position to power the cigarette lighter. Your RN1 will not
ページ15に含まれる内容の要旨
2.3 Additional Application with the Optional SKU 1. TMC Accessory (only available in certain areas) You may use external TMC accessory to perform TMC function when you are in a TMC Traffic signal available areas. Please visit: www.tmcforum.com for the TMC Coverage information. Please connect the TMC accessory to the USB port of RN1 car holder for the TMC application and be placing the TMC accessory in a place which will not interfere to the driving safe. (See Figure 2-4-1) Please refer to
ページ16に含まれる内容の要旨
Chapter 3 Using the RN1 3.1 RN1 Operating Basics After fully charging the RN1, it is ready to be used. You can now turn it on and proceed to system settings configuration. 3.2 To turn on the device: 1. Sliding the battery switch to “ON”. (Default status OFF) 2. Turn on your device by pressing the power button on the top right panel of the device. After turn on the device, main page will display. This is also referred to the Favorite page. 3.3 To configure system settings: If you
ページ17に含まれる内容の要旨
2. Tap “Language” on the System page. 3. It will display current language in central area. 4. To drag wheel scroll language tags. 5. To set the system time zone, tap “Time Zone” in System Menu. 6. Tap the icon to set up the function of daylight saving s time. a. represent enable the function of daylight savings time. b. represent disable the function of daylight savings time. 7. Drag the Map to adjust the time zone. 17
ページ18に含まれる内容の要旨
3.4 Additional System settings Other system settings can be used to view and adjust your device current preferences. Navigate from the System Menu. 3.5 Reset GPS Reset : ：When user wonder if GPS receiver perform properly or not .( ex : Change the region) Factory Reset ：The factory reset function not only resets the operating system settings to default factory values, but also reset the GPS settings. Calibratio n ：When the touch screen does not respond well, calibrate the screen of
ページ19に含まれる内容の要旨
19
ページ20に含まれる内容の要旨
4 Tap the “Factory Reset” icon in the Reset Menu. 5 Tap the “YES” to do the Factory Reset. 6 Tap the “Calibration” icon in the Reset Menu. 7 Tap on the center of the target. Repeat as the target moves around the screen. 20
