ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
RealQSG-PN4000-6000.book Seite 9 Samstag, 29. September 2007 1:11 01 9 PN 4000/6000 For your safety Before you start to install and use this navigation system, please familiarise yourself with its various components and functions. Furthermore, please read through the safety instructions carefully to avoid causing injury to yourself and/or other road users. Do not subject the navigation system to high temperatures or extreme exposure to sunlight. Temperatures over 50 °C can severely damage th
ページ3に含まれる内容の要旨
RealQSG-PN4000-6000.book Seite 10 Samstag, 29. September 2007 1:11 01 10 PN 4000/6000 What's included? 1 Navigation system 2 Lithium ion battery 9 3 Cradle with suction cup to 3 1 attach the device to the 8 windscreen 4 12 V DC cable to power the 6 navigation system from 2 within the vehicle (adapter for cigarette lighter) 5 5 100/240 V AC adapter 4 7 You must not use any cables other than the AC adapter and DC cable provided to power the device and to charge the battery! 6 Quick Start
ページ4に含まれる内容の要旨
RealQSG-PN4000-6000.book Seite 11 Samstag, 29. September 2007 1:11 01 11 PN 4000/6000 Getting started Before you can switch on the navigation system for the first time, you must insert the battery. This is done by performing the following steps: Open the battery compartment. Push the battery into the battery compart- ment with the connection contacts facing downwards. You can now close the battery compartment. Connect the navigation system to the 12 V power supply in your vehicle. T
ページ5に含まれる内容の要旨
RealQSG-PN4000-6000.book Seite 12 Samstag, 29. September 2007 1:11 01 12 PN 4000/6000 To install the device in the vehicle, proceed as follows: Find a suitable place in the vehicle for attaching the cradle. The screen should be clearly visible from the driver's seat but the device should not obscure the driver's view. Press the suction cup against the glass (with a clear view of the sky) and move the pressure lever to- wards the glass until it locks in place. Attach the navigation
ページ6に含まれる内容の要旨
RealQSG-PN4000-6000.book Seite 13 Samstag, 29. September 2007 1:11 01 13 PN 4000/6000 Navigation After switching on the navigation system, the legal disclaimer screen appears. Tap OK after reading the screen. As soon as the system is ready, the Main menu will appear on the screen. Main menu Tap on Settings > Regional. Language: select your preferred language for the menu and map display. Voice: select the preferred voice for the naviga- tional information. Units: switch bet
ページ7に含まれる内容の要旨
RealQSG-PN4000-6000.book Seite 14 Samstag, 29. September 2007 1:11 01 14 PN 4000/6000 List button: After you have typed a few letters you can tap the List button. A list of matching results is displayed. The number of entries that exist under this button is displayed in small digits. Switch between alphabetical, numerical and accented characters/special charac- ters by using the keyboard toggle. By using the "backspace" button, you can delete incorrect entries (either whole words or in
ページ8に含まれる内容の要旨
RealQSG-PN4000-6000.book Seite 15 Samstag, 29. September 2007 1:11 01 15 PN 4000/6000 For DVB-T reception, connect both the DVB-T antennae included in the scope of deliv- ery to the PN 4000/6000. Open the rubber cover on the top right of the back and plug in the antenna cables. The two antennae must be positioned at least 50 cm apart to enable reception. DVB-T picture reception switches off at speeds greater than 7 km/h unless the VDO Dayton back seat cradle is used. DVB-T sound reception
ページ9に含まれる内容の要旨
RealQSG-PN4000-6000.book Seite 16 Samstag, 29. September 2007 1:11 01 16 PN 4000/6000 System settings After tapping the Settings button you can make various system settings. Channel and programme selection (EPG – Electronic Program Guide) Call up the channel and programme selection function by tapping the EPG button. This displays an overview of channels and current programmes. Teletext When a channel is active you can also view the teletext pages for that channel by tapping the Teletext bu
