ページ1に含まれる内容の要旨
Quick Start Guide
Warning
This Quick Start Guide provides general guidelines for installing and using IRISnotes.
For detailed instructions on IRISnotes' full range of functionalities, please refer to the
user guide and help file provided with the installation CD-ROMs.
IRISnotes is a pen and mobile note taker that can capture handwritten notes and drawings, as
well as edit, save and export them. Your handwritten notes can be instantly converted into
editable text in a wide range of languages.
Pac
ページ2に含まれる内容の要旨
To replace the ink refill (the pen cap serves as an ink refill extractor): - Firmly press the top of the cap against the tip of the pen and pull the used ink refill out. - Slide the new ink refill in. The receiver unit ON/OFF button Press for 5 seconds to turn on LCD screen Charge the receiver unit at least 30 minutes before using the product (full charge time is 3.5 hours): plug the USB cable to the unit and connect it to your PC USB port. The LCD screen displays the following status indication
ページ3に含まれる内容の要旨
2. Insert the MyScript Notes Lite CD-ROM in your CD-ROM drive and follow the on- screen instructions. When the installation is complete, click on Finish, then remove the CD-ROM from the CD-ROM drive. How to use IRISnotes? Writing notes Position the receiver unit at the top of your A4 paper sheets and turn it on. Fix the receiver onto the edge of the Use the paper clips paper, face up at the back of the receiver unit The receiver can be placed in 3 positions*, in the center, at the left corner, o
ページ4に含まれる内容の要旨
! Hold the pen properly: ! Do not place your hand between the pen and the receiver unit ! Keep your fingers away from the pen tip crystal cone Uploading notes - Connect the receiver unit to your PC (using the USB cable) and launch Easy Note Taker. - In the Note Manager, click on Upload on the main toolbar. All the notes get uploaded from the receiver to your PC and can be viewed on screen. You can select other preferences for the upload. Select Preferences from the Configuration menu and get to
ページ5に含まれる内容の要旨
Using the pen in mouse mode You can set the pen to mouse mode. In this mode, tapping the pen in the writing area or pressing the button on the side of the pen will act like a single mouse click. Pressing and holding the pen down for a moment will act like a right mouse click. To switch to mouse mode: - Tap the pen once in the small area located in front of the receiver unit. For detailed instructions on IRISnotes, refer to: - Easy Note Taker manual: available from Windows’ Start menu - MyScrip