Schneider Electric DuraDrive Direct Coupled Actuators MA4X-715Xの取扱説明書

デバイスSchneider Electric DuraDrive Direct Coupled Actuators MA4X-715Xの取扱説明書

デバイス: Schneider Electric DuraDrive Direct Coupled Actuators MA4X-715X
カテゴリ: 自動車部品
メーカー: Schneider Electric
サイズ: 0.72 MB
追加した日付: 5/11/2013
ページ数: 24
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスSchneider Electric DuraDrive Direct Coupled Actuators MA4X-715Xの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Schneider Electric DuraDrive Direct Coupled Actuators MA4X-715Xに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Schneider Electric DuraDrive Direct Coupled Actuators MA4X-715Xをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Schneider Electric DuraDrive Direct Coupled Actuators MA4X-715Xのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Schneider Electric DuraDrive Direct Coupled Actuators MA4X-715Xの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Schneider Electric DuraDrive Direct Coupled Actuators MA4X-715X 取扱説明書 - Online PDF
Advertisement
« Page 1 of 24 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Schneider Electric DuraDrive Direct Coupled Actuators MA4X-715Xを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Schneider Electric DuraDrive Direct Coupled Actuators MA4X-715Xの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

MA40-704X Series,
MA4X-707X Series,
MA4X-715X Series
DuraDrive Series Spring Return
Two-Position Actuators
General Instructions
Application

DuraDrive™ Direct Coupled Actuators are designed to
be used in both damper and valve control applications.
The follow general instructions are for damper
applications, refer to the Applicable Literature table for
valve literature.
The MA40-704X, MA4X-707X and MA4X-715X series
spring return actuators are used for the on-off, fail safe
control of damp

ページ2に含まれる内容の要旨

Applicable Literature F-Number Description Audience Purpose – Sales Personnel Describes the globe valve – Application Engineers actuator/linkage assembly’s features, MX40-6XXX-2XX, MX4X-7XXX-2XXSeries F-26750 – Installers specifications, and possible applications. Actuator/Linkage Assemblies General Instructions – Service Personnel Provides step-by-step mounting – Start-up Technicians instructions. – Sales Personnel Describes the actuator/linkage/ball valve – Application Engineers VX-2000

ページ3に含まれる内容の要旨

SPECIFICATIONS Actuator Inputs Control Signal: On-off, spring return. SPST control contacts or Triacs (500 mA rated). Power Input: See Table-1. All 24 Vac circuits are Class 2. All circuits 30 Vac and above are Class 1. Connections: 3 ft. (91 cm) appliance cables, 1/2 in. conduit connector. For M20 Metric conduit, use AM-756 adaptor. Actuator Outputs Electrical: Auxiliary Switches, MA4X-715X-502 and MA4X-707X-502 Two SPDT 7A (2.5A) @250 Vac, UL listed; one fixed @ 5° and one adjustable 25 to

ページ4に含まれる内容の要旨

Table-1 Model Chart. Approximate Output Torque Timing in Actuator Power Input Rating Seconds @ 70° b lb-in (N-m) a (21°C) Auxiliary Part Numbers VA Watts Switch Running Holding Spring Maximum Manual Voltage Powered Minimum 60 DC Return Stall Override 50 Hz 50 60 Hz Amps 50 Hz 60 Hz Hz Hz MA40-7153 No No MA40-7153- 24 Vac c Two No 502 ± 20% 9.8 9.7 7.5 7.5 0.29 2.8 2.8 22-30 MA41-7153 No Yes Vdc MA41-7153- c Two Yes 502 MA40-7150 No No MA40-7150- c Two No 502 120 Vac 11.7 10.0 8.8 8.4 —

ページ5に含まれる内容の要旨

ACCESSORIES For use with MA4X-7XXX: AM-671 Universal Mounting Bracket, AM-693 is required AM-672 Universal Mounting Bracket, AM-693 is required AM-673 Mounting Bracket AM-674 Weather Shield AM-675 Base Mounting Plate for AM-674 AM-676 Universal Shaft Extension AM-714 Weather Shield (polycarbonate) AM-756 Metric Conduit Adapter M20 x 1.5 to 1/2" NPT AM-761 7-inch Anti-rotation Bracket AM-762 9-inch Anti-rotation Bracket For use with MA40-7043: AM-709 Position Indicator and Stroke Limiter AM-710 U

ページ6に含まれる内容の要旨

TYPICAL APPLICATIONS (wiring diagrams) Figure-1 through Figure-3 illustrate typical wiring diagrams for spring return floating actuators. See Table-1 for model selection. Optional Auxiliary 24 Vac Transformer Aux Switches or 22-30 Vdc MA4X-7153 Switches MA4X-7XXX-502 MA4X-7073 Blk Com Org Com Line MA4X-7153-502 Aux Switch 1 Red Hot (+DC) Volts Vio NC MA4X-7073-502 25 to 85° Grn/Yel Adjustable Yel NO 1 2 3 Com Org/Wht SPST Control Contact Aux Switch 2 Vio/Wht NC 5° Fixed Yel/Wht NO MA4X

ページ7に含まれる内容の要旨

120 Vac or MA40-7040 230 Vac Wire No. 1 Neutral MA40-7041 L1 N Wire No. 2 Hot 1 L2 H Green/Yellow 2 MA40-7040-501 1 Provide overload protection and disconnect as MA40-7041-501 required. 120 Vac or Wire No. 1 Neutral 2 Actuators may be wired in parallel. Power 230 Vac L1 N consumption must be observed. Wire No. 2 Hot 2 1 L2 H Green/Yellow 3 For end position indication, interlock control, fan startup, etc., MA40-704X-501 model incorporates one built-

ページ8に含まれる内容の要旨

Precautions General Warning: • Electrical shock hazard! Disconnect the power supply (line power) before installation to prevent electric shock and equipment damage. • Make all connections in accordance with the job wiring diagram and in accordance with national and local electrical codes. Use copper conductors only. Caution: • Avoid electrical noise interference. Do not install near large contactors, electrical machinery, or welding equipment. • Do not drill holes in actuator body. Six pre-dr

ページ9に含まれる内容の要旨

Mounting Caution: To remain in NEMA 2/IP54 compliance, the MA4X-715X and MA4X-707X series actuators should be mounted with conduit end down. Mount the TAC DuraDrive Actuator directly on the damper shaft in locations that clear the maximum dimensions of the actuator case and allow the actuator to be mounted flush to the surface of the terminal box and perpendicular to the damper shaft. Note: Some terminal boxes have sheet metal screw heads or other protrusions near the damper shaft. In these

ページ10に含まれる内容の要旨

R L B - Left - Long Shaft B - Right - Long Shaft 2 2 2 R 2 3 L 1 1 1 3 L 4 4 "L" Marker "R" Marker 1. Assemble mounting clamp. 2. Assemble retaining clip. 3. Place actuator over shaft. 4. Hand tighten clamp nuts. Universal 1 Universal mounting clamp. 1 mounting clamp. Correct clamp mounting 2 Retaining clip. .4 .4 2 Retaining clip. position if actuator is .2 .2 in normal spring return position 0 0 L R (before preload) B - Left - Short Shaft B - Right - Short Shaft B B 2 "L" Marker 2 A L R A

ページ11に含まれる内容の要旨

1 .8 .6 .4 .2 0 L 0° 9 C - Left and Right Center the Universal Bracket in the Slot 1 .8 .6 .4 .2 0 1/2 1/2 1 5 x 1 7 8 x 2 6 #8 Sheet Metal 1 Screw 5. Center bracket in slot. 6. Drill two holes. 7. Start one screw. 8. Swing bracket down. D- Left D- Right C C L Centerline L Centerline 1 1 10 .8 .8 10 .6 .6 .4 .4 .2 .2 0 0 9 12 12 14 14 5° 5° 11 11 13 13 9. Loosen clamp nuts. 10. Check that the shaft is in full zero position. 11. Swing actuator 5° in the direction of travel. Do not move shaft. 1

ページ12に含まれる内容の要旨

9 R L 1 .8 .6 .4 .2 0 E- Left E - Right x 2 x 2 15 15 15. Tighten bracket screws. Correct clamp mounting .4 .4 position .2 .2 (after 5˚ preload) 0 0 L R MA4X-707X and MA4X-715X Series Installation Caution: Do not drill additional holes in the actuator body. Six pre-drilled holes are located on each side, under the label, to accept #10-24 thread-forming screws for mounting accessories. Note: The MA40-707X and MA40-715X series actuators come equipped with standard universal mounting clamp inst

ページ13に含まれる内容の要旨

LOCK LOCK Long Shaft Short Shaft Min. 3/4" (20 mm) Min. 3 1/2" (90 mm) 3/8" to 3/4" Diameter (10 mm to 20 mm) 3/8" to 1/2" Square (10 mm to 13 mm) Move the damper to its normal position. Verify the controller action is set to match the damper application. Normally closed damper: when damper is closed, actuator position indicator should be at 0°. When damper is open, actuator position indicator should be at 90°. Normally opened damper: when damper is open, actuator position indicator should be

ページ14に含まれる内容の要旨

LOCK -5 -5 -5 -5 R L 0 0 0 0 R L L R L 40 40 40 40 10 10 10 10 30 30 30 30 20 20 20 20 - Long Shaft C - Left C - Right - Long Shaft 2 2 2 R 2 L 3 1 1 1 3 4 4 "L" Marker "R" Marker 1. Assemble mounting clamp. 2. Assemble retaining clip. 3. Place actuator over shaft. 4. Hand tighten clamp nuts. Universal Universal 1 mounting clamp. 1 mounting clamp. 2 Retaining clip. 2 Retaining clip. For MA40-707X and MA40-715X actuators: Correct clamp mounting Correct clamp mounting position if actuator is

ページ15に含まれる内容の要旨

L L 0° 9 D - Left and Right Center the Universal Bracket in the Slot R 1/2 1/2 5 1 x 2 6 #8 Sheet Metal 1 5. Center bracket in slot. Screw 6. Drill two holes. x 1 7 7. Start one screw. For MA41-707X and MA41-715X actuators, insert and tighten both screws. 8 8. Swing bracket down (MA40 actuator only). E- Left E- Right C C L Centerline L Centerline 10 10 R R 9 11 13 13 9. Loosen clamp nuts. 10. Check that the shaft is in full zero position. For MA41-707X and MA41-715X only: 11. Tighten clamp

ページ16に含まれる内容の要旨

-5 -5 0 0 40 40 10 10 30 30 20 20 F- Left F- Right L R x 2 x 2 16 16 For MA40-707X and MA40-715X only: 16. Tighten bracket screws. For MA40-707X and MA40-715X actuators: Correct pointer position after mounting. L R For MA41-707X and MA41-715X actuators: Correct pointer position after mounting. R L The lock on MA41-707X and MA41-715X will release on first power-up. 16 © Copyright 2010 Schneider Electric All Rights Reserved. F-26642-8 20 20 30 30 10 10 40 40 0 0 -5 -5

ページ17に含まれる内容の要旨

Jackshaft Installation (MA40-704X Series) The MA40-704X actuator is designed for use with jackshafts up to 3/4" (19 mm) in diameter. In most applications, the MA40-704X actuator may be mounted in the same manner as a standard damper shaft application. If the jackshaft diameter is larger than 5/8" (16 mm) in diameter, the optional AM-710 universal clamp must be used. (MA4X-715X and MA4X-707X Series) The MA4X-715X and MA4X-707X actuators are designed for use with jackshafts up to 1.05" (27 mm)

ページ18に含まれる内容の要旨

SIEBE MA-7501-502 AM-673 Figure-4 Mounting Multiple Actuators. Wiring Requirements Control and Power Leads See Table-3 for power wiring data. Refer to Figure-1 through Figure-3 for typical wiring applications. Note: Class 2 control and power lead wiring must be routed separately from line voltage wiring and any other non-class 2 circuits. Line voltage, auxiliary switch, and auxiliary switch leads must be connected to a class 1 circuit. Table-3 Power Wiring Data. Maximum Wire Run in ft. (m) (5

ページ19に含まれる内容の要旨

Auxiliary Switches The MA40-704X-501 series actuators include one built-in SPDT auxiliary switch which can be used for interfacing or signaling (e.g., for fan start-up). The switch is adjustable between 0° and 95° of rotation (0 to 1 scale). The MA4X-715X-502 and MA4X-707X-502 series actuators include two built-in SPDT auxiliary switches which can be used for interfacing or signaling (e.g., for fan start-up). The switch position near the normal (spring return) position is fixed at 5°. The o

ページ20に含まれる内容の要旨

1 1 .8 .8 .6 .6 .4 .4 .2 .2 L R 0 0 Figure-5 Adjusting Stop Block for Limited Rotation. Rotation Limitation for MA4X-715X and MA4X-707X Series The AM-689 rotation limiter is used in conjunction with the tab on the universal clamp or the AM-686 position indicator which comes with the AM-689. In order to function properly, the clamp or indicator must be mounted correctly. The AM-689 rotation limiter controls the rotational output of the MA4X-715X, MA4X-715X- 502, MA4X-707X, and MA4X-707X-502 act


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Schneider Electric DuraDrive Direct Coupled Actuators MA4X-707X 取扱説明書 自動車部品 0
2 Schneider Electric DuraDrive Direct Coupled Actuators MA40-704X 取扱説明書 自動車部品 11
3 Sony BP-GL95 取扱説明書 自動車部品 25
4 Sony BP-GL65 取扱説明書 自動車部品 2
5 Philips Epic 50PF9966 取扱説明書 自動車部品 3
6 Philips HTS3011 取扱説明書 自動車部品 2
7 Philips SDJ6040W 取扱説明書 自動車部品 1
8 Philips SWA2151W 取扱説明書 自動車部品 0
9 Philips Vortex Flow Meter F-2200 Series 取扱説明書 自動車部品 3
10 A4 Tech. Sun StorageTekTM 4Gb FC Dual GbE HBA SG-XPCIE2FCGBE-E-Z 取扱説明書 自動車部品 0
11 Aetna SATINELLE ICE HP6492 取扱説明書 自動車部品 0
12 Accel 140025 取扱説明書 自動車部品 15
13 Actron Cylinder Leakage Tester Kit 2509 取扱説明書 自動車部品 18
14 Actron 2501 取扱説明書 自動車部品 0
15 Actron Digital Multimeter CP7676 取扱説明書 自動車部品 28