ページ1に含まれる内容の要旨
®
Savi W445
Wireless headset system
User Guide
ページ2に含まれる内容の要旨
Welcome Congratulations on purchasing your new Plantronics product. This user guide contains instructions for setting up and using your Savi W445 (D100 USB Adapter + WH500 Headset) Wireless Headset System. Please refer to the separate safety instructions for important product safety information prior to installation or use of the product. Plantronics Savi User Guide
ページ3に含まれる内容の要旨
Contents 1 Package Contents ................................................................ 4 7 Plantronics Control Panel ................................................... 15 2 System Features ................................................................... 5 Devices Tab ................................................................. 15 3 Headset Setup ...................................................................... 6 Applications Tab ...............................................
ページ4に含まれる内容の要旨
1 Package Contents Savi W445 USB Adapter and Charger USB Adapter Base Power Supply Deluxe USB Charging Cable Deluxe Charger Base with Spare Battery Savi WH500 Headset Headset Headbands Battery Fit kit with earloops, eartips and foam sleeve Plantronics Savi User Guide 4
ページ5に含まれる内容の要旨
2 System Features Savi USB Adapter Features Indicator Light Subscription Button Savi WH500 Headset Features Volume and Mute Button Call Control Button (press in to mute/unmute) Indicator Light Microphone Headset (fitted with earloop and eartip) Plantronics Savi User Guide 5
ページ6に含まれる内容の要旨
90º 90º 3 Headset Setup 4 Press in to attach. Installing the Headset Battery Position the battery as shown on the headset and slide into position until the battery snaps into place. Left earloop configuration 1 Choose the size of earloop that fits most comfortably. Align the earloop as shown and insert it onto the headset. NOTE This product has a replaceable battery. Use only the battery type supplied by Plantronics. 2 Rotate the earloop up 90 degrees. Customize the Headset The headset c
ページ7に含まれる内容の要旨
Wearing the Headset Fitting the Headset with a Headband When you wear the headset, the microphone should rest as close The headset can be rotated for wearing on the left or right ear. to your cheek as possible without touching. The microphone 1 Hold the headband so it is aligned to receive the headset can be adjusted inward by the pivoting earpiece to optimize the as shown and insert the headset into the headband. position of the headset. 1 Slide the headset over and behind your ear and fit t
ページ8に含まれる内容の要旨
4 System Setup Connecting the Power Supply Charging the Spare Battery Both the Deluxe Charge Base and Deluxe Charging Cable 1 Connect the base power supply into the power jack on can charge both the headset battery and the spare battery the Deluxe Charger Base. simultaneously or independently if desired. The spare battery 2 Connect the power supply to the outlet. The power is shipped with Savi 445 in the Deluxe Charger Base battery indicator light will be solid green. compartment. See “Re
ページ9に含まれる内容の要旨
2 USB adapter can be folded as shown. Connecting the USB Adapter to your PC 1 Insert the USB adapter into USB Port on PC. The indicator light on the USB adapter will be solid red to indicate the USB adapter is powered on and will turn solid green when it finds the headset. IMPORTANT NOTE For best performance it is recommended that Windows is updated with Service Pack levels listed below: ® Microsoft Windows XP Service Pack 3 (SP3) or later ® Microsoft Windows Vista Service Pack 1 (SP1
ページ10に含まれる内容の要旨
5 Using Your Headset System Powering Up the Headset If the headset battery is charged and connected to the headset, Volume and mute button the headset is automatically on. The headset does not have an on/off button. Talk Time Call control button With a single full charge, the Savi W445 will provide up to 7 hours of talk time in narrowband mode. Talk time will be reduced when operating in wideband mode and/or if the headset is used consistently at a far distance from the adapter. The batter
ページ11に含まれる内容の要旨
Replacing Your Headset Battery Placing the Headset in Sleep Mode If you won’t be using the headset for a long period of time and 1 Once your spare battery is fully charged, remove the the headset will not be in the charging cradle, you can put the spare battery from the battery compartment on the headset in sleep mode. With the headset idle, press the call side of the Deluxe Charging Cradle or from the back of control button for three seconds until you see the headset flash the Deluxe USB
ページ12に含まれる内容の要旨
4 When the indicator light on the USB adapter goes solid Headset Indicator Light green, the headset and the USB adapter are subscribed If you are not on a call, you can toggle the headset in-use to one another. indicator light on and off by pressing the headset volume down To ensure subscription was successful, press the call control button (press volume up for left ear configuration) for three button: the headset will flash white and the USB adapter will seconds. flash green. NOTE If
ページ13に含まれる内容の要旨
6 Making Calls With your Headset and PC Software Installation It is highly recommended that you install the Plantronics software. Though your Savi system will operate without the software, it will limit the system’s full capabilities. Install the Plantronics software to enable remote call answer/end with compatible softphones. The software can be downloaded at plantronics.com/software. After installation, to visit the Plantronics control panel, click on Start > Programs > Plantronics > Pla
ページ14に含まれる内容の要旨
Conferencing Up to Three Guest Headsets While on a call, you can subscribe up to three guest headsets to your USB adapter for conferencing. As you add headsets to the adapter, an additional headset icon will appear in the Plantronics Control Panel with a number from 1 to 3 indicating the number of guest headsets subscribed to the adapter. Guests may conference in as described below: 1 While you are on a call, place the guest’s headset into subscription mode. 2 Short press (less than one s
ページ15に含まれる内容の要旨
7 Plantronics Control Panel User preferences and various device settings can be changed using the Plantronics Control Panel. To start this program, click Start > Programs > Plantronics > Plantronics Control Panel. Devices Tab To configure your settings, select Plantronics D100 from the pull down menu and click the Device Settings box. Below are the setting options and defaults for the USB adapter and headset. NOTE Some parameters that do not apply to a particular Plantronics device may ap
ページ16に含まれる内容の要旨
To change the PC Audio Bandwidth default in the software, go to: Start > Programs > Plantronics > Plantronics Control Panel > Device Settings – USB adapter. You also can toggle between narrowband and wideband audio by doing a short press (less than one second) followed by a long press (more than three seconds) on the USB adapter subscription button while it is in an idle state. The USB adapter light will flash red for four seconds upon entering narrowband mode and flash green for four sec
ページ17に含まれる内容の要旨
Audio Limiting Hours on Phone Per Day Audio Limiting provides advanced hearing protection for daily The default is 8 hours. If you change the setting to 2/4/6 hours, noise exposure. When Audio-Limiting is SELECTED, the system the system will adjust the audio limiting algorithm accordingly. monitors and controls sound to ensure audio levels do not exceed 80 dBA or 85 dBA (whichever is selected) specified by current and imminent EU legislation. When Audio-Limiting is set to NOT SELECTED, the
ページ18に含まれる内容の要旨
Preferences Tab The Preferences Tab allows you to set preferences for the media player as well as other general settings. Options Feature Settings Default Media Player Action to Media Player – When a call begins Mute/pause/do nothing Pause – When a call ends Play/do nothing Play General Launch audio devices control panel (Provides a shortcut to the Windows Sounds and Audio Devices control panel.) Ring Both Headset and PC Selected/Not selected Not selected Microsoft OC/Lync Dial-tone Enabl
ページ19に含まれる内容の要旨
8 Plantronics Update Manager All required software for Savi W445 can be remotely updated when updates are available. Start Plantronics Update Manager from Windows Start Programs menu to change settings such as automatic or manual check for updates. Check for Updates Automatically By enabling this check box, you will activate a periodic automatic check for available software updates. Check for Updates Now You can choose to check for available software updates at any time by clicking on the C
ページ20に含まれる内容の要旨
9 T roubleshooting and Common Questions My headset is unstable. When you wear the headset, the microphone should rest as close to your cheek as possible without touching. The microphone can be adjusted inward by the pivoting earpiece to optimize the position of the headset. See Wearing the Headset. When I dial from my softphone Ensure your headset is charged. application, nothing happens. Ensure your headset is subscribed to the USB adapter. See Subscribing a Headset. Ensure that the Plantron
