ページ1に含まれる内容の要旨
Wireless Bluetooth® Headset
Casque d'écoute sans fil
MD
Bluetooth
Auricular inalámbrico con
Bluetooth®
RF-SH430
User Guide Guide de l’utilisateur Guía del Usuario
ページ2に含まれる内容の要旨
Rocketfish RF-SH430 Wireless Bluetooth® Headset Contents Introduction ................................................................. 3 Features ......................................................................... 3 Setting up the headset............................................. 6 Using the headset....................................................10 Using the menus ......................................................14 Maintaining .................................................
ページ3に含まれる内容の要旨
Introduction Thank you for choosing the Rocketfish RF-SH430 Wireless Bluetooth® Headset. This user guide provides the information you need to use and care for your headset. Features • Spoken menu for pairing, battery status, and favorite number management • Ultra low power echo noise reduction algorithm • Favorite (speed dial) number (user configurable) • Audible caller identification (digit by digit) • 12 configurable ring tones • Automatic call answer (configurable) • Automatic connection a
ページ4に含まれる内容の要旨
Identifying parts (top) 1 4 5 3 2 #Part 1 Multi-function button/Indicator light 2 Headset charging socket 3Vol– 4Ear hook 5 Headset cord 4
ページ5に含まれる内容の要旨
Identifying parts (bottom) 7 6 8 9 #Part 6Speaker 7Multi-function arm 8Microphone 9Vol+ RF-SH430 5
ページ6に含まれる内容の要旨
Setting up the headset Charging the headset Before using the headset, you need to charge the battery. To charge the battery: 1 Plug the power supply into a power outlet. 2 Plug the other end of the power supply into the headset charging socket [2]. The indicator light [1] turns green to indicate the headset battery is charging. 3 Unplug the headset from the power supply after the indicator light turns off. The headset is fully charged. Note: The headset does not work while charging. If the i
ページ7に含まれる内容の要旨
When your battery is completely discharged, it takes up to three hours to fully charge your headset. Battery life may seem short when you first use the headset. The battery will fully charge after two or three complete charge/discharge cycles. Pairing the headset Auto-pairing For added convenience, your headset has an auto-pairing function so that when you turn the headset on for the first time, it is already in pairing mode. Your headset should beep every two seconds to indicate that it i
ページ8に含まれる内容の要旨
2 Put the headset in pairing mode by pressing and holding the multi-function button for about five seconds. The indicator light should flash twice every second and you should hear a series of beeps every two seconds. -OR- Put the headset in pairing mode by entering the voice menu, then choosing “pairing”. For more information, see “Using the voice menu” on page 14. 3 Complete the auto-pairing procedure. Wearing and carrying the headset You can wear your headset on either ear and carry it in
ページ9に含まれる内容の要旨
To mount the earhook: • Rotate the multi-function arm [7] upwards and slide it inside the earhook [4] jack. To place the earhook on your ear: 1 Rotate the earhook [4] slightly forwards. 2 Gently place the speaker [6] into your ear canal. 3 Rotate the earhook [4] backwards and adjust it behind your ear. To switch the earhook from one ear to the other: • Rotate the multi-function arm [7] downwards and rotate the earhook [4] to the opposite side. RF-SH430 9
ページ10に含まれる内容の要旨
Carrying the headset Use the headset cord to attach the headset to your mobile phone. Using the headset Caution: Prolonged use of the headset at high volumes may affect your hearing capacity. Turning the headset on and off To turn the Headset on: • Press and hold the multi-function button [1] for about three seconds until a series of tones is heard. The indicator light [1] flickers for one second and starts flashing. 10
ページ11に含まれる内容の要旨
To turn the headset off: • Press and hold the multi-function button [1] for about three seconds until a series of tones is heard. The indicator light flashes before turning off. Changing the volume To increase the volume: • During a call, press Vol+ button [9]. To decrease the volume: • During a call, press the Vol– button [3]. The headset remembers all volume settings even when it is switched off. Accepting or rejecting a call To accept a call: • When the mobile phone rings (ring tone can
ページ12に含まれる内容の要旨
Initiating a call from your mobile phone To initiate a call: • Dial the number as usual with your mobile phone. If your headset is on and the mobile phone has been correctly paired, your mobile phone transfers the call to your headset. Initiating a call with voice dialing To voice dial a call: 1 Briefly press the multi-function button and wait for the feedback tone from the mobile phone. 2 Speak the name of the person you wish to call. Note: your mobile phone must support voice dialing and
ページ13に含まれる内容の要旨
Calling the favorite number To call the favorite number: • Press and hold the multi-function button for one second. Deactivating audible calling number identification (whisper mode) The RF-SH430 can inform you by voice of the calling number on a digit by digit basis when whisper mode is activated. To deactivate the calling number identification feature: 1 Press the Vol+ button [9] briefly (you hear a voice menu option). 2 Press and hold the Vol– [3] and Vol+ buttons [9] at the same time fo
ページ14に含まれる内容の要旨
Conserving battery life To conserve battery life, your headset features an auto-sleep function. This function turns the headset off after 12 hours of inaction. Once your headset has entered auto-sleep, it can be switched on again normally. When the battery has only 10% charge remaining, the headset produces an audible warning tone sequence every time a call is ended. To check your battery level: •Use the voice menu. -OR- Press the multi-function button [1] four times. Resetting your headset
ページ15に含まれる内容の要旨
2 Accept an option by pressing the multi-function button [1]. To exit the menu: • Press the multi-function button [1] twice or wait for the option to be repeated. After 20 seconds, you will exit the voice menu automatically. Available voice menu options include: • Favorite 1 (or 2, 3, 4)—Access your favorite numbers • Battery—Check the battery status • Store—Store your favorite numbers • Pairing—Enter the headset in manual pairing mode Favorite numbers To store your favorite numbers, change
ページ16に含まれる内容の要旨
Battery status Select this option to check the remaining talk-time of the battery in hours. The numbers range from 0 to 8. By default, you will hear 8 even when the remaining talk-time exceeds 8 hours. When only 1 hour of talk-time is left, it is automatically announced. Pairing To pair the headset with your mobile phone through the voice menu, select this option, then follow the steps in “Auto-pairing” on page 7. Using button menus To activate the extended menu functions: • Press the Vol+
ページ17に含まれる内容の要旨
How to... Action Headset response Decrease the volume. With the headset on or during a call, Every press you hear a beep with a press the Vol– button repeatedly. lower volume and lower tone Enter pairing mode. With the headset off, press and hold Headset indicator flashes green twice the multi-function button for five every second and you will hear a series seconds. See the pairing instructions of high tones. of your mobile phone. Accept a call. During the incoming call, press the Headset pic
ページ18に含まれる内容の要旨
Extended menu How to... Action Headset response Activate or deactivate With the headset on, press Vol+, Vol–, A series of 4 beeps. the extended menu. and the multi-function button for one second. Mute the microphone. During a call, press the multi-function Microphone is muted and periodic button twice. tones are heard. Reactivate the During a call with muted microphone, Microphone is reactivated. microphone. press the multi-function button twice. Redial the last number. With the headset on, pr
ページ19に含まれる内容の要旨
Maintaining Caring for the battery Your headset battery will have a long life provided you follow these guidelines: • Do not charge your headset outdoors • Do not charge your headset if the ambient temperature is above 113° Fahrenheit (45° Celsius) or below 50° Fahrenheit (10° Celsius). • Do not leave your headset connected to the charger for extended periods of time, as excessive charging will reduce battery life. RF-SH430 19
ページ20に含まれる内容の要旨
Using the headset safely • Only use the headset according to the directions within this User Guide. Using this headset contrary to these directions could cause injury. In addition, any use of this headset contrary to this User Guide will void any warranty. • Do not use the headset in an environment where it may come in contact with liquid or be exposed to high humidity or extreme temperatures. • Do not place the headset in a fire as it may explode causing injury or death. • Do not use t
