Chauvet color ado1ipの取扱説明書

ページ1に含まれる内容の要旨

User Manual

ページ2に含まれる内容の要旨

Edition Notes The COLORado™ 1 IP User Manual Rev. 01c covers the description, safety Edition Notes precautions, installation, programming, operation, and maintenance of the COLORado™ 1 IP. CHAUVET® released this edition of the COLORado™ 1 IP User Manual Rev. 01c in October 2010. Trademarks CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or Chauvet). The CHAUVET® logo in its entirety including the Chauvet name and the dotted triangle, and all other t

ページ3に含まれる内容の要旨

Table of Contents Table of Contents 1. Before You Begin ............................................................................................................1 What is Included ............................................................................................................................. 1 Unpacking Instructions ................................................................................................................... 1 Typographic Conventions ...............

ページ4に含まれる内容の要旨

Table of Contents DMX Values ................................................................................................................................. 15 TOUR ...................................................................................................................................................... 15 ARC1 ...................................................................................................................................................... 16 ARC1 + D ...

ページ5に含まれる内容の要旨

Before You Begin 1. Before You Begin • One COLORado™ 1 IP What is • One power input cable (IP66 to Edison, US market) Included • One IP66 power extension cable • One IP66 signal extension cable • One DMX input cable (IP66 to 3-pin XLR male) • One DMX output cable (IP66 to 3-pin XLR female) • One gel frame holder • One safety cable • One Warranty Card • One Quick Reference Guide Immediately upon receiving this product, carefully unpack it and check the container in Un

ページ6に含まれる内容の要旨

Before You Begin Please read the following notes carefully because they include important safety Safety Notes information about the installation, usage, and maintenance of this product. It is important to read all these notes before starting to work with this product. There are no user serviceable parts inside this product. Any reference to servicing it you may find from now on in this User Manual will only apply to properly CHAUVET® certified technicians. Do not open the hous

ページ7に含まれる内容の要旨

Introduction 2. Introduction The COLORado™ 1 IP is an RGBW wash light based on 42 LEDs. It consists of a Product single pod with a double bracket mounting yoke. The AC power comes directly into the fixture’s housing through a proprietary IP66 rated power input cord. The power linking Description uses a proprietary IP66 rated power link cord. The DMX input and output signals use proprietary IP66 DMX in and DMX out cords. The fixture comes with all the necessary adapters to conn

ページ8に含まれる内容の要旨

Introduction DMX Channel Summary DMX Channel Function TOUR 1 Master Dimmer 2 Red 3 Green 4 Blue 5 White 6 Color Macro 7 Strobe 8 Auto Programs 9 Auto Speed Adjust 10 Dimmer Speed 11 ID Address DMX Channel Function ARC1 1 Red 2 Green 3 Blue DMX Channel Function AR1 + D 1 Master Dimmer 2 Red 3 Green 4 Blue DMX Channel Function ARC2 1 Red 2 Green 3 Blue 4 White DMX Channel Function AR2 + D 1 Master

ページ9に含まれる内容の要旨

Introduction Product Overview Safety cable passageway Power In Power Out A = 30 mm B = 13 mm DMX In DMX Out Control Panel (Plate removed) COLORado™ 1 IP User Manual Rev. 01c -5-

ページ10に含まれる内容の要旨

Setup 3. Setup The COLORado™ 1 IP has an auto-ranging power supply that can work with an input AC Power voltage range of 100~240 VAC, 50/60 Hz. Make sure that you are connecting this product to the proper voltage, as per the specifications in this guide, the product’s user manual, or on the product’s sticker. Always connect the COLORado™ 1 IP to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire. To determine the

ページ11に含まれる内容の要旨

Setup The Master/Slave mode allows a COLORado™ 1 IP fixture to control one or more Master/Slave COLORado™ 1 IP fixtures without a DMX controller. The controlling fixture becomes the Connectivity “master” when running an Auto or Custom program as well as when in STATIC mode. The controlled fixtures are the “slaves” and you must set them to “SLAVE” mode from their respective control panels. During the Master/Slave operation, the slave fixtures will operate in unison with the master f

ページ12に含まれる内容の要旨

Setup Before mounting this fixture, read and follow the safety recommendations indicated in Mounting the Safety Notes section (page 2 of this manual). Always mount this fixture in any safe position while making sure that there is adequate Orientation room around it for ventilation, configuration, and maintenance. Make sure to mount this fixture away from any flammable material as indicated in the Safety Notes section. The COLORado™ 1 IP consists of a sealed (IP66) hou

ページ13に含まれる内容の要旨

Operation 4. Operation Button Function Control Panel Exits from the current menu or

Description function Enables the currently displayed menu or sets the currently selected value in to the current function Navigates upwards through the menu list and increases the numeric value when in a function Navigates downwards through the menu list and decreases the numeric value when in a function You can set the COLORado™ 1 IP start address

ページ14に含まれる内容の要旨

Operation Continued from previous page In this mode, the fixtures with the same DMX starting address will respond to the DMX DMX Control With ID controller based on the fixture’s individual ID address setting. If the user selects ID Addressing address “0”, all the fixtures with the same DMX address will respond in unison. Otherwise, each fixture will follow the control for its particular ID address. 1) Repeat steps 1, 2, and 3 from DMX Control Without ID Addressing. 2) Activate

ページ15に含まれる内容の要旨

Operation Continued from previous page The COLOR setting determines how the COLORado™ 1 IP displays the white color Color Adjustment when the Red, Green, and Blue faders are all at the “255” value. 1) Go to SET > Color. 2) Select OFF, RGBW, or UC. Setting Description OFF When R, G, and B are “255,” the output will be at its maximum. RGBW When R, G, and B are “255,” CAL2 will determine the output. When R, G, and B are “255,” the output will match that of fixtures from UC

ページ16に含まれる内容の要旨

Operation Continued from previous page This setting allows the user to reset the COLORado™ 1 IP fixture to its default values, Reset including the custom programs. 1) Go to SET> REST. 2) When prompted, enter the master access password as shown in Control Panel Lock. 3) Wait for the reset process to finish. This setting allows the user to edit the temperature of the 11 white colors used in the Whites Setting Macros channel. The 11 pre-set whites are configurable. 1) Go

ページ17に含まれる内容の要旨

Operation These notes intent to clarify the way the TOUR DMX personality works. TOUR Notes • Channel 1 controls the intensity of the currently projected color. Master Dimmer • When the slider is at the highest position (255) the intensity of the output is at its maximum. • Channels 2, 3, 4, and 5 control the intensity ratio of each of the Red, Green, Blue, Red, Green, Blue, & and White LEDs. White Color • When the slider is at the highest position (255), the intensity

ページ18に含まれる内容の要旨

Operation Menu Map -14- COLORado™ 1 IP User Manual Rev. 01c

ページ19に含まれる内容の要旨

Operation DMX Values Channel Function Value Percent/Setting TOUR 1 Master Dimmer 000  255 0~100% 2 Red 000  255 0~100% (or Step Time when playing CUS. 01~10) 3 Green 000  255 0~100% (or Fade Time when playing CUS. 01~10) 4 Blue 000  255 0~100% 5 White 000  255 0~100% 000  010 No function 011  030 R: 100% G: Up B: 0% 031  050 R: Down G: 100% B: 0% 051  070 R: 0% G: 100% B: Up 071  090 R: 0% G: Down B: 100% 091  110 R: Up G: 0% B: 100% 111  130 R: 10

ページ20に含まれる内容の要旨

Operation Continued from previous page Channel Function Value Setting Value Setting Value Setting TOUR (Cont.) 000  009 All IDs 212 ID 23 235 ID 46 010  019 ID 1 213 ID 24 236 ID 47 020  029 ID 2 214 ID 25 237 ID 48 030  039 ID 3 215 ID 26 238 ID 49 040  049 ID 4 216 ID 27 239 ID 50 050  059 ID 5 217 ID 28 240 ID 51 060  069 ID 6 218 ID 29 241 ID 52 070  079 ID 7 219 ID 30 242 ID 53 080  089 ID 8 220 ID 31 243 ID 54 090  099 ID 9 221 ID 32 244 ID 55 100  109 ID 1