Harbor Freight Tools 03358の取扱説明書

ページ1に含まれる内容の要旨

SPOTLIGHT
1,000,000 CANDLE POWER
03358
ASSEMBLY & OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd. / Camarillo, CA 93011
®
Copyright 2002 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For Technical questions and replacement parts, please call 1-800-444-3353.

ページ2に含まれる内容の要旨

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model__________ Serial No.___________ Purchase Date______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Technical Specifications Tool Name: Spotlight, 1,000,000 Candle Power Item Number: 03358 Housing Diameter: 6" Battery: 6 VDC (5AH U.L. Listed) Lens Adapte

ページ3に含まれる内容の要旨

Assembly Your Spotlight comes completely assembled. When unpacking your Spotlight, check to make sure that all the parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353. Operation To assist you with operating your Spotlight, please refer to Figure 1 and Figure 2 on page 4 and to the Parts List and Assembly Diagram located on page 5. Charging Your Spotlight Battery (#9) is rechargeable. It can be charged by either using the Power Adapter (#17

ページ4に含まれる内容の要旨

Red Charging Light Cushion Grip Figure 2 (#14) Hanging Strap (#12) Locking Trigger Trigger (#11) Hold (#10) Tripod Adapter (#14) Battery (#9) Figure 1 Battery Cover (#15) Warning - Battery Disposal The Spotlight is powered by a battery which will have a long life span. When the battery is no longer functioning, it should be removed from the Spotlight and properly recycled. Many states require recycling. Contact your local solid waste authority for information on recycli

ページ5に含まれる内容の要旨

REPLACING THE BULB Step 1: Take away the pin on the back of the reflector. Step 2: Take out the old bulb with cord. Step 3: Pull out the old bulb from the cord connection. Replace with the new bulb and cord connection and reassemble by reversing the steps shown above. #03358 REV 04/03 Page 5

ページ6に含まれる内容の要旨

Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. Parts Diagram Parts List CUSHION GRIP #03358 REV 04/03 Page 6