ページ1に含まれる内容の要旨
OPERATING INSTRUCTIONS
on your choice of a CoolStart™ Remote Engine Starter by Crimestopper
Security Products Inc. This system is the most advanced and reliable Remote Start system availab le
on the market today.
This booklet contains the information necessary for using & maintaining your remote start system. If
any questions arise, contact your installation dealer or Crimestopper Security Products Inc. at (800)
998 - 6880.
*IMPORTANT INFOR MATION -
ページ2に含まれる内容の要旨
WARNINGS and its shall not be liable for any accident or vehicle in which all items, such as parking brake and all associated components, door switches, a) Understand the operation of this system and its safety features. . c) Check and maintain the cond ition of the vehicle and all items relative to the proper operation of this system and its safety features d) Always leave the doors and windows closed and locked to protect against accident and theft. is adequate ventilati
ページ3に含まれる内容の要旨
The system has three remote modes of controlling the engine. • Remote starting the engine • Turning off a remote started engine • Idle Down/Infinity Run modes - SUCCESSFUL START: 1) Press Remote Start button for at least one second. 2) for remote start use with a host alarm). 3) After 4 seconds Starter Motor engages, Parking lights and Acc circuits turn off. 4) Engine Starts and Runs. Parking Lights and Acc turn back on. 5) Engine will remain running for programmed run time
ページ4に含まれる内容の要旨
and you exit the vehicle. The vehicle is put into a remote running condition before you exit and it will remain running for the programmed run time or until you come back. Example: You pull up to a convenience store for a quick stop, "Idle Down" mode keeps engine running when you exit the vehicle, remote lock doors or arm alarm. When you return, unlock or disarm alarm, turn ignition ON and drive away. - 1) With engine running, press Remote Start button for at least one seco
ページ5に含まれる内容の要旨
This mode can only be engaged when "Idle Down" is being engaged. It allows the vehicle engine to remain running INDEFINITELY after the programmed run time elapses . This mode is especially desirable for protecting police, emergency, or work vehicles that need to be left running unattended. This mode will allow the vehicle to be left running and unattended preventing the vehicle from being stolen. – 1) With engine running, press and hold the brake pedal down, then press the S
ページ6に含まれる内容の要旨
4) Then the system automatically exits program mode and returns to normal operation. - START MODE: 0 LOCK BUTTON HOLD SEC FOR 4 SECONDS 1 - 4 TIMES TIMES OFF 0 4 SEC CONFIRM NOTES on Programming Self Start Mod e 1) remote start. 2) - seconds program mode will a bort and vehicle will remote start. 3) will abort and vehicle will remote start. 4) Activating any reset line or operating Remote start with transmitter will turn - i.e.: drive vehicle, turn ignition "on", accidentally
ページ7に含まれる内容の要旨
1) To operate, press (#3) trunk release button for at least one second to remotely open trunk. The keyless entry will stil l function normally while in valet mode. In the event of a lost or broken transmitter, the Starter Disable/Anti - grind must be overridden in order to start the vehicle with the key. 1) brake pedal while pressing Program / Valet switch. 1) Press and hold BOTH the brake pedal and the Pro gram/Override switch for 4 full seconds. Prevents the en
ページ8に含まれる内容の要旨
Main Alarm / Remote Starter Power Fuse(s) may need to be removed before service. This will further prevent the service personnel from accidentally arming and triggering the system but most likely not Th These units ship from the factory with two transmitters pre - coded to your system. Additional remotes (sold separately) can be added by following the p rocedure below. 1) Open hood (Gray wire grounded), start engine with key. 2) Depress and HOLD the BRAKE PEDAL and the Pro
ページ9に含まれる内容の要旨
RS900I OP REVA CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 SOUTH TAPO ST. SIMI VALLEY, CA. 93063
