ページ1に含まれる内容の要旨
COLOR VIDEO MONITOR
INSTRUCTIONS
TM-21A2U
Contents
Important Safety Precautions ........2
Buttons and basic functions
—Remote control .......................5
Buttons and basic functions
—Main unit ..................................6
How to operate menus ....................7
Basic setting for picture .................8
Customized setting .........................9
Troubleshooting .............................10
Specifications ................................11
LCT2089-001A-H
Cover_TM-21A2U-f.p6
ページ2に含まれる内容の要旨
Important Safety Precautions CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning fl ash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude to constitute a risk of electric sh
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the pola
ページ4に含まれる内容の要旨
16) Avoid improper installation and never position the unit where good ventilation is impossible. When installing this monitor, distance recommendations must be maintained between this monitor and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance guidelines shown for safe operation. 200 mm 200 mm 150 mm 150 mm 50 mm 17) Cautions for installation — Do not tilt this monitor towards the left or right, or towards the back. — Install this monitor
ページ5に含まれる内容の要旨
Buttons and basic functions—Remote control No. Press To 1 INPUT SELECT Select the input. 5 • Pressing this button turns on the monitor from standby mode. (You cannot turn off the monitor with this button.) 1 6 2 PICTURE MODE Select the picture mode (see page 8). 2 3 OFF TIMER Set the off-timer (see page 9). 4 DISPLAY/BACK Displays the current input name. 3 While operating the menu, you can use this 7 4 button to return to the previous menu. 8 5 POWER Turn on or off the monitor from standby mode.
ページ6に含まれる内容の要旨
Buttons and basic functions—Main unit Front Panel 1 2 3 4 5 6 7 8 (in the door) Rear Panel VIDEO-1 OUTPUT INPUT VIDEO AUDIO 9 0 No. Button/terminal Description 1 Headphone jack. 2 IN (VIDEO-2) Video and audio input jacks for VIDEO-2 mode. 3 MENU / OK Press to display menu and confirm selected function. 4 INPUT Press either button to select the desired input. Press either button to turn on the monitor from standby mode. (You cannot turn off the monitor with these buttons.) ∞ 5 Press to select the
ページ7に含まれる内容の要旨
How to operate menus To display the MENU, press the MENU/OK button. To select an item, press the 5/∞ buttons. To adjust the selected item, press the 2/3 buttons. MENU Screens The available operation buttons on the remote control are shown on each menu screen. You can use the front control buttons with the same or similar name. MENU COLOR SYSTEM COLOR SYSTEM PICTURE AUTO FEATURES EXIT BACK OK BACK OK PICTURE PICTURE SETTING *1 CONTRAST PICTURE MODE USER BRIGHT *2 PICTURE SETTING SHARP WHITE BALAN
ページ8に含まれる内容の要旨
Basic setting for picture COLOR SYSTEM Adjusting the picture—USER You can select the appropriate color system You can adjust the desired picture setting when when the picture is not clear or no color appears. selecting USER in PICTURE MODE. Select COLOR SYSTEM, then choose the 1 Select USER in PICTURE MODE under desired setting. PICTURE menu. MENU COLOR SYSTEM ❇ ❇ MENU PICTURE PICTURE MODE AUTO Color system changes automatically USER according to the current input. 2 Select PICTURE SETTING in th
ページ9に含まれる内容の要旨
Customized setting VNR CONTROL LOCK You can reduce the noise. You can disable the front control buttons of the Select VNR in the PICTURE menu, then choose monitor except the I (main power) button. a desired setting. Select CONTROL LOCK in the FEATURES menu, then choose ON or OFF. ❇ MENU PICTURE VNR ❇ MENU FEATURES CONTROL LOCK OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum ❇ For the basic operations of the menu, please level. see “How to
ページ10に含まれる内容の要旨
Troubleshooting Solutions to common problems related to your monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. No picture • Connect the signal cable firmly. • Turn on the power of the connected component and set the output correctly. Stripes appear on the picture • Interference occurs caused by other devices such as an amplifier, personal computer, or a hair drier. Move s
ページ11に含まれる内容の要旨
Specifications Model TM-21A2U Type Color Video Monitor Picture Tube 21" measured diagonally Effective Screen Size Width: 404 mm (15 7/8") Height: 303 mm (11 7/8") Diagonal: 505 mm (19 7/8") Scanning Frequency H: 15 kHz V: 50 Hz/60 Hz Input/Output Terminals Composite signal input terminals VIDEO-1/VIDEO-2: 2 lines, RCA connector x 2 (1 Vp-p, 75 Ω ) Composite signal output terminal OUTPUT: 1 line, RCA connector x 1 Analog audio input terminals VIDEO-1/VIDEO-2: 2 lines, RCA connector x 2 Analog aud
ページ12に含まれる内容の要旨
TM-21A2U COLOR VIDEO MONITOR Dimensions Unit : mm (inch) Front View Side View 502 (19 7/8") 471.6 (18 5/8") 416 (16 1/2")* Asterisks (*) are used to indicate front panel dimensions. © 2006 Victor Company of Japan, Limited 0306STH-MW-MT 05-12_TM-21A2U-f.p65 12 06.3.6, 9:53 AM 315 (12 1/2")* 479.7 (19")
