ページ1に含まれる内容の要旨
OPERATING GUIDE for your
NAPCO FREEDOM F-64TPG Garage Touchpad
Home Security System
SYSTEM READY
10/15/06 12:05PM
R
Freedom F-64TPG Touchpad
© NAPCO 2006 PATENTED OI320A 9/06
1
F-64TPG_OI320A.03_USER_2... Friday, September 15, 2006 11:40
page 1 Composite
ページ2に含まれる内容の要旨
INTRODUCTION NAPCO Freedom Security System. Congratulations on your purchase of a Now everyone in your family, young and Please read it through and retain it for new Freedom Garage Door Security Sys- old alike, will enjoy the true peace-of-mind tem. This revolutionary new concept in you would expect from a quality, state-of- handy reference. Because your system is residential security makes using your sys- the-art NAPCO Security System, without customized for your home and lifestyle,
ページ3に含まれる内容の要旨
TABLE OF CONTENTS TABLE OF CONTENTS INTRODUCTION................................................................................2 TESTING THE SYSTEM....................................................................2 R GARAGE TOUCHPAD INDICATORS AND CONTROLS ..................4 ARMING WHEN LEAVING ................................................................ 6 IF THE ALARM IS SOUNDING: BYPASSING FAULTED ZONES .......................................................7 ARMI
ページ4に含まれる内容の要旨
F-64TPG TOUCHPAD CONTROLS & INDICATORS 1 18 19 20 21 BYPASS 22 FIRE SYSTEM READY FIRE TBL 14 10/15/06 12:05PM SYS TBL 2 15 3 16 5 10 6 7 11 12 8 4 9 4 17 13 4 F-64TPG_OI320A.03_USER_2... Friday, September 15, 2006 11:40 page 4 Composite
ページ5に含まれる内容の要旨
F-64TPG TOUCHPAD CONTROLS & INDICATORS 1 LCD Window – 32 character LCD displays interior devices activated. 15 + AUX Button – Press and hold down for 2 system status messages, zone 7 BYPASS Button – Press to enter the seconds to alert the Central Station of a descriptions, system troubles, etc. Bypass Menu, where system functions auxiliary emergency. 2 are displayed in the LCD window. Press STATUS Light. Lights (green) to indicate 16 Police Button – Press and hold down that th
ページ6に含まれる内容の要旨
ARMING WHEN LEAVING If you are leaving with no other family members remaining home: Check the Touchpad indicators. The green STATUS light must be ON-STEADY, and the LCD SYSTEM READY display will read "SYSTEM READY", indicating that the system is ready to arm. 1 • If the green STATUS light is off and zones are scrolling in the display, a perimeter zone is faulted or a monitored deadbolt (other than your exit door) is unlocked. Check the open zones listed and close the door, window, or
ページ7に含まれる内容の要旨
BYPASSING FAULTED ZONES If you are trying to arm with a faulted zone or zones, the LCD display will clearly indicate which zone(s) are faulted. If you cannot repair the zone(s), they may be temporarily removed from the system, or bypassed, using the following procedure: Press the BYPASS button. "Press down arrow to scroll through zone list BYPASS 1 and press BYPASS to select zone to bypass" The LCD window will list all zones in your system. Scroll forward or backward through t
ページ8に含まれる内容の要旨
ARMING STAY: PROTECTING YOURSELF AT HOME Arming in the Stay mode allows you to remain home with the perimeter protection active but with the interior protection off, so that you may move freely within the premises. Arm Stay at the Garage Touchpad as follows: Check the Touchpad indicators. The green STATUS light must be ON-STEADY, and the LCD dis- SYSTEM READY play will read "SYSTEM READY", indicating that the system is ready to arm. 1 • If the green STATUS light is off and zones are s
ページ9に含まれる内容の要旨
ARMING AND LEAVING WITH OTHERS STAYING If you are arming and leaving with other family members remaining home: Check the Touchpad indicators. The green STATUS light must be ON-STEADY, and the LCD dis- SYSTEM READY play will read "SYSTEM READY", indicating that the system is ready to arm. 1 • If the green STATUS light is off and zones are scrolling in the display, a perimeter zone is faulted or a moni- tored deadbolt (other than your exit door) is unlocked. Check the open zones listed an
ページ10に含まれる内容の要旨
EXITING WITH THE SYSTEM ALREADY ARMED If the system is Armed STAY and you are leaving with other family members remaining home: Press the STAY button. "The system is arming The Touchpad will voice prompt the correct action. STAY in Stay mode" 1 The red ARMED light will turn on steady, indicating that you have up to 3 minutes to exit through the garage and close the door. ARMED Open the garage door from the inside. System will disarm. 2 Exit the garage. 3 Close the
ページ11に含まれる内容の要旨
EXITING WITH THE SYSTEM ALREADY ARMED If the system is Armed STAY and you are leaving with NO other family members remaining home: Press the AWAY button. The Touchpad will voice prompt the correct action. AWAY 1 • If you change your mind after pressing AWAY, press SILENCE to clear arming. The red ARMED light will turn on steady, indicating that you have up to 3 minutes to exit through the garage and close the door. ARMED Open the garage door from the inside. System will
ページ12に含まれる内容の要旨
EMERGENCY BUTTONS Emergency Buttons (Only available if programmed). The Emergency Buttons, if programmed, are always active, whether the system is armed or disarmed. The Emergency Button must be Held Down for 2 seconds to activate the emergency alarm and transmit the signals to central station. Fire Emergency Hold down the Fire button to alert the central station of a fire emergency. * (Fire Emergency programmed? YES NO) Auxiliary Emergency Hold down this button to alert
ページ13に含まれる内容の要旨
DISARMING THE SYSTEM DISARMING WHEN RETURNING HOME: When returning home, open your garage door from the outside to automatically disarm the system. The red ARMED light turn off and the green STATUS light will turn on. If an alarm has occurred while you were away, opening the garage door will initiate an entry delay sequence. The I-FOB must be used to disarm the system or an alarm will be initiated within a short interval. If the delay is com- pleted without the I-FOB used to disarm
ページ14に含まれる内容の要旨
SILENCING AN ALARM If an alarm occurs while you are at home: The Touchpad siren will sound and the red ARMED light will flash. The LCD display will read ALARM "ALARM". Proceed with caution! If you suspect that an intruder may still be in the premises, leave immediately and call authorities from a neighbor's telephone. To silence the alarm, insert your I-FOB key into the I-FOB slot on the face of the Touchpad and re- move when alarm has silenced. The LCD window will
ページ15に含まれる内容の要旨
FIRE PROTECTION* If a fire is detected, the siren will sound a distinct pulsating tone and the LCD window will flash the FIRE word FIRE. If a Fire Alarm does occur: If a fire is in progress, evacuate the premises immediately! Call the Fire Department from an outside phone. 1 If there is no evidence of a fire, press RESET OR insert your I-FOB key into the Touchpad.** The siren will silence, and the word FIRE in the Touchpad LCD window will stop flashing. 2 Determine which devi
ページ16に含まれる内容の要旨
FIRE PROTECTION Preparing a Fire Escape Plan 3. Each person tests his door. shoulder against it and open it 4. Pretend the door is hot and use the cautiously. Be ready to slam the Even with the most advanced fire alternate escape exit. door if smoke or heat rushes in. alarm system, adequate protection 5. Everyone meets outdoors at Crawl through smoke, holding your requires an escape plan. the assigned location. breath. Close the doors again on To prepare your plan, draw floor leavi
ページ17に含まれる内容の要旨
TOUCHPAD MENU MODE The Touchpad can provide access to a wide assortment of utility functions, each displayed on the Touchpad LCD window in a prompting “YES/NO” format. 1 To enter Touchpad Menu Mode, press MENU. 2 To skip a function, press NO. 3 To select and execute a function, answer YES. • Press RESET to return to normal Touchpad operation. The Touchpad will automatically return to its normal operating mode if no activity is detected for longer than one minute. • When the last fun
ページ18に含まれる内容の要旨
TOUCHPAD MENU MODE continue to chime when system is armed. CHANGE KEYPAD BEEP VOLUME - When the Touchpad buttons are pressed or CHANGE KEYPAD when an entry warning activates, the Touchpad beeper sounds. This function allows BEEP VOLUME Y/N the Touchpad beeper volume to be adjusted. Press YES to increase, press NO to decrease. Selections are HIGH, MED-HIGH, MED, LOW and OFF. CHANGE VOICE VOLUME - All Touchpad functions are displayed in the LCD window CHANGE VOICE and are
ページ19に含まれる内容の要旨
TOUCHPAD MENU MODE ACTIVATE FAULT FIND - Activates a multiple diagnostic test report. For installer's use ACTIVATE only. If accidentally enabled, press RESET to exit. Note: This selection only appears FAULT FIND Y/N with a Master I-FOB inserted in the Touchpad. RESET SYSTEM TBL - System troubles display and sound at the Touchpad. Correct- RESET ing the trouble will clear most indications, however the following error codes will require SYSTEM TBL Y/N manual reset: E13
ページ20に含まれる内容の要旨
TOUCHPAD MENU MODE ACTIVATE ACTIVATE DOWNLOAD - For installer's use only. If accidentally enabled, press RESET to exit. Note: This feature is disabled while armed. Note: This selection only ap- DOWNLOAD Y/N pears with a Master I-FOB inserted in the Touchpad. ACTIVATE LOST KEY MODE - In the event that the keys to your deadbolt are lost or ACTIVATE stolen, the system may still be used by arming in the Lost Key Mode. In Lost Key LOST KEY MODE Y/N Mode, the system may be
