Panasonic BB-HCA10Aの取扱説明書

ページ1に含まれる内容の要旨

BB-HCA10A_IG.fm Page 1 Tuesday, January 29, 2008 1:59 PM
Please read this document before using the product, and save this
document for future reference.
Installation Guide Panasonic Network Camera Website:
http://www.panasonic.com/netcam
for customers in the USA and Puerto Rico
Indoor Use Only
Ceiling Flush Mount Bracket
Model No.
BB-HCA10A
Please read the Operating Instructions included with the camera before proceeding.
• This document (Installation Guide) explains how to install the B

ページ2に含まれる内容の要旨

BB-HCA10A_IG.fm Page 2 Tuesday, January 29, 2008 1:59 PM 8. Align the 2 round protrusions on the camera and the holes on the ceiling Mounting the Bracket and the Camera plate (included with the camera), tighten the screw to secure the ceiling 1. Using the included template as a guide, make a hole (φ 240 mm plate, then pass the safety wire through the ceiling plate as shown. Make [9 7/16 inches]) in the ceiling. sure you do not scratch the lens cover when performing this procedure. Templat