ページ1に含まれる内容の要旨
Solution 64
� �� ���� ������ ���
User Guide
EN Security System
ページ2に含まれる内容の要旨
Solution 64 User Guide Copyright Notice Telepermit Note Unless otherwise indicated, this publication is the copyright The grant of a Telepermit for a device in no way indicates Telecom of Bosch Security Systems Pty Ltd (“Bosch”). All rights are acceptance of responsibility for the correct operation of that reserved.You may download a single copy of this publication. device under all operating conditions. By downloading the publication you agree that you will: (i) only This equipment shall not
ページ3に含まれる内容の要旨
Solution 64 User Guide Contents Copyright Notice ......................................................... 2 Internal Siren Test .................................................. 20 Trademarks .................................................................. 2 Strobe Test ............................................................. 20 Notice of Liability ........................................................ 2 Communication / Reporting ...................................... 21 Notice to Own
ページ4に含まれる内容の要旨
Solution 64 User Guide Program M enu Tree Table 1: shows all of the system options in a tabular format. Each option can be access by pressing the Menu key and then drilling down using the arrow and OK keys until the required option is listed on the display. A quick way to jump to a particular option is to press the Menu key followed by the specific option number. You may be asked to enter your PIN when accessing some options. Example: To set a new call forward number enter MENU + 5 + 1 + 6 an
ページ5に含まれる内容の要旨
Solution 64 User Guide When a zone (such as a door or window) is closed, it is said to be I ntroduc tion ‘normal’. When the door or window is open, the zone is said to be Your system helps to secure life, property and investments ‘faulted’. When you turn your system on, you will usually want all against fire, theft and bodily harm. It consists of a keypad (or of the zones in your system to be normal, although, you can turn keypads), sensors such as motion detectors or devices located yo
ページ6に含まれる内容の要旨
Solution 64 User Guide Repor ting Alarms Key Description Your system may be programmed to send reports to your security The [ ] key allows you to navigate company. Once the report is complete, the system returns through menus or to toggle characters the telephone to normal operation (check with your security when programming telephone numbers. company). Pressing The [ ] key will display current trouble conditions when the area that the keypad is displaying is disarmed. Your system ma
ページ7に含まれる内容の要旨
Solution 64 User Guide Icon Status Meaning After you turn an area All On, the keypad will sound 1 short beep every second. During the last Exit On The area is turned off. Delay 10 seconds fast short beeps will be heard. If you Tone don’t exit before the delay time expires and an Off The area is turned All On or Part On exit delay door is faulted, an alarm occurs. On The area is turned All On Error If you press an incorrect key, your keypad will Tone sound a 2 second tone. Off The area is
ページ8に含まれる内容の要旨
Solution 64 User Guide Turning The System Off Basic System Operation When the system is on, you must enter through a designated Turning An Area All On entry door to prevent an alarm. Opening a designated door (e.g. Use this function to turn an area All On. The Solution 64 control front door) will start entry time. During entry time, the keypad panel is factory default only for one area. As soon as you turn will emit a pulsing tone “beep” to remind you to turn the system an area on, exi
ページ9に含まれる内容の要旨
Solution 64 User Guide Remote Arming - Quick Arm sounds, try a different PIN. The keypad will now prompt you to enter your new PIN again. If you forget to arm your system it may be possible for you to remotely arm it using a touch tone telephone if the remote arm Confirm New PIN for option has been enabled by your installer. DEBBIE SMITH U002 To arm the system call the number which the panel is connected to and when the panel answer you will here 3 beeps in accending Press OK or MENU frequen
ページ10に含まれる内容の要旨
Solution 64 User Guide to add, then press [OK]. Access > PIN Codes > The keypad will prompt you to enter the new pin. MENU 1-1-1 Change Other PIN Enter New PIN for If you have a master PIN, this command allows you to change User 3 Name U003 somebody else’s PIN. It is recommended that you write down the old PIN and the new one before you begin. Once the change is Press OK or MENU complete you should destroy the written copy. The new PIN must have the same number of digits as the old PIN.
ページ11に含まれる内容の要旨
Solution 64 User Guide Tokens 1. Enter [MENU] + [1] + [2] + [1]. A list of users will display on the keypad. This section outlines how to add and delete token cards that allow an alternate method for users to turn the system on and 2. Use the [ ] and [↓] keys to select the user who’s token you off via a prox reader enabled Keypad or an external reader. The want to delete, then press [OK] to select. system can also be configured to automaticall open a door if it has been fitted with an el
ページ12に含まれる内容の要旨
Solution 64 User Guide 2. Use the [↑] and [↓] keys to select the user that you want to add the RF keyfob ID, then press [OK] to select. 2. To program the user name, use the [↑] and [↓] keys to Alternatively, you can enter the user number you, then select the user that you want to program, then press [OK] press [OK]. to select. Alternatively, you can enter the user number you want to program, then press [OK]. The keypad will prompt you to enter the RF keyfob ID number: The keypad will
ページ13に含まれる内容の要旨
Solution 64 User Guide time group to specify the access period, day of the week and Access > User Properties > holidays. To now restrict the user, they must belong also to the MENU 1-4-5 Access Assignment same timer group. This now restricts the user from accessing the system outside the nominated times and days within the This menu allows you to assign each user to one or more access schedules linked to the timer group. groups. An access group is used to allow and/or restrict which users
ページ14に含まれる内容の要旨
Solution 64 User Guide Main Office A001 Area 1 Name Disarmed EXIT NOW Press OK or MENU If the area is turned All On, the keypad will display: Main Office A001 When exit time has expired, the keypad will display that Armed All On all areas are turned All On (Armed). Area 1 Name ARMED If the area is turned Part On, the keypad will display: Fri,Aug,13 5:34 pm Main Office A001 Armed Part On Area icons will only display if programmed to do so by your security installer. i Note 3. To exit, press
ページ15に含まれる内容の要旨
Solution 64 User Guide Areas > Commands > Areas > Area Properties > MENU 2-0-5 Chime On/Off MENU 2-1-0 Area Name Chime mode allows you to monitor a zone (or group of zones) This menu allows you to program the name for each area. Each to sound the keypad buzzer or activate a programmable output area name can be programmed with up to 16 characters. At when the corresponding area is turned off (disarmed). This can factory default, only Area 1 is used. The Solution 64 control panel be usef
ページ16に含まれる内容の要旨
Solution 64 User Guide Inputs > Commands > Inputs > Commands > MENU 3-0-2 Bypass Zones MENU 3-0-3 Set Chime Zones This menu allows you to program zones to be monitored when This menu allows you to bypass or un-bypass a single or multiple the system is turned off. Chime mode is ideal to monitor a front zones before you turn the area All On, Part On or Part 2 On. door to sound the keypad buzzer when opened (faulted). When bypassing zones, it disables the ability for a zone to detect Enter
ページ17に含まれる内容の要旨
Solution 64 User Guide Inputs > Commands > Inputs > Commands > MENU 3-0-4 MENU 3-0-5 Set Part 2 Zones Smoke Sensor Reset This menu allows you to program which zones are to be monitored This menu allows you to reset smoke sensors. when an area has been turned Part 2 On. Enter programming mode (PIN + MENU) then, Enter programming mode (PIN + MENU) then, 1. Enter [MENU] + [3] + [0] + [5]. 1. Enter [MENU] + [3] + [0] + [4]. A list of different areas will display on the keypad. A list of areas wi
ページ18に含まれる内容の要旨
Solution 64 User Guide Inputs > Input Testing > Inputs > Input Testing > MENU 3-9-0 MENU 3-9-1 Walk Test All Zones Walk Test A Single Zone This menu allows you to test all zones within an area at the same This menu allows you to select a single zone to be tested via walk time. To successfully walk test each zone, you must open and test. close each zone. Enter programming mode (PIN + MENU) then, Enter programming mode (PIN + MENU) then, 1. Press [MENU] + [3] + [9] + [1]. 1. Press [MENU] + [3]
ページ19に含まれる内容の要旨
Solution 64 User Guide Output 1 Name O001 Output 1 Name O001 Is Off and Ready Output is OFF, To Turn ON,Press ON. To Go Back Press OK Press OK or MENU To turn the output on, press [ON]. The keypad will display the following when the output is off and missing: The keypad will display the following when the output is Output 1 Name O001 on: Is Off and Ready Connection Trouble Output 1 O001 Press OK or MENU Output is ON, To Turn OFF,Press OFF. The keypad will display the following when the out
ページ20に含まれる内容の要旨
Solution 64 User Guide Internal Audible Testing Outputs > Output Testing > Press any key to abort MENU 4-9-0 External Siren Test This menu allows you to test any external sirens which have been Press OK or MENU connected by your installer. The test will last for 5 seconds. Enter programming mode (PIN + MENU) then, When the bell test is complete, the keypad will display the following: 1. Enter [MENU] + [4] + [9] + [0]. If the system has been partitioned, the keypad will Testing Complete. P
