Handy Home Products GRUNTAVORE LIFT 16867の取扱説明書

ページ1に含まれる内容の要旨

GRUNTAVORE LIFT
Item # 16867
INSTRUCTIONS - PARTS DRAWING - PARTS LIST
WARNING: READ INSTRUCTIONS BEFORE OPERATING
1. Center load on table - 1800 lb. maximum.
2. Connect to 100 psi maximum shop air.
3. Keep safety bar in position at all times - except
when lowering.
4. Keep hands and tools from under carriage.
5. Do not mount table when in elevated position.
6. Do not ride vehicle onto lift.
7. Lift must be in the lowered position when moving.
8. Only trained persons should operate Air

ページ2に含まれる内容の要旨

GRUNTAVORE LIFT NOTE: READ ENTIRE MANUAL TO COMPLY WITH ALL SAFETY AND SERVICE PRE- CAUTIONS. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. INSTRUCTIONS UNPACKING AND SET-UP 1. Open carton, then remove ramp and shipping boards. 2. Connect foot-operated air valve to 100 psi maximum air supply. The lift may be damaged and/or personal injury may result if the pressure exceeds the maximum 100 psi rating. 3. Stand clear of lift table, and depress

ページ3に含まれる内容の要旨

GRUNTAVORE LIFT MOUNTING ILLUSTRATION AND PARTS LIFT PART NO.. DESCRIPTION QTY 11253 SPIRAL RETAINING RING 4 11271 10-32 HEX NUT 2 11358 QUIK PIN 12 12128 5/16-18 X ¾ HEX HD CAP SCREW 20 12305 5/16-18 HEX NUT 20 14737 CAST WHEEL 2 15255 DETENT HANDLE EXTENSION RETAINER 2 15258 DETNET HANDLE EXTENSION TUBE 2 15261 SWIVEL STABILIZER FOOT 2 15263 AXLE EXTENSION 2 15265 STABILZER SHAFT 53 ¼” 2 15267 ¾” PIPE EXTENSION 61 ½” LONG 2 15269 1” PIPE EXTENSION 61 ½” LONG 2 15275 END EXTENS

ページ4に含まれる内容の要旨

GRUNTAVORE PARTS DRAWING - PARTS LIST Part # Description Part # Description 15403 piston seal 10819 detent clip 15253 top assembly 14381 air hose assembly 16761 inside frame assembly 11250 screw 3/4 -10 x 1-3/4 16760 outside frame assembly 11253 retaining ring 1-5/16 16766 foot assembly 11255 lockwasher - 3/4” 15452 ramp 14737 wheel 15687 drop out cover 12887 valve stem assembly 15458 detent bar 12937 foot valve assembly complete 15460 frame pivot shaft 11304 cylinder shaft bushing 15461 cylind