ページ1に含まれる内容の要旨
Version simplifiée
Simple
Versión sencilla
version
3
v
Version basique
Basic
Versión básica
version
12
v
AV SURROUND RECEIVER
Version avancée
Advanced
Versión avanzada
version
AVR-1611
27
v
Owner’s Manual
Manuel de l’Utilisateur
Manual del usuario
“Part names and functions”
Information
(vpage 61)
Informations
60
v
“Nomenclature et fonctions“
(vpage 61)
Información
“Nombres y funciones de las
piezas“ (vpágina 61)
ページ2に含まれる内容の要旨
ESPAÑOL FRANCAIS ENGLISH SAFETY PRECAUTIONS n IMPORTANT SAFETY FCC INFORMATION (For US customers) INSTRUCTIONS 1. PRODUCT CAUTION This product complies with Part 15 of the FCC Rules. Operation is subject 1. Read these instructions. RISK OF ELECTRIC SHOCK to the following two conditions: (1) this product may not cause harmful 2. Keep these instructions. interference, and (2) this product must accept any interference received, 3. Heed all warnings. DO NOT OPEN including interference that may
ページ3に含まれる内容の要旨
ENGLISH FRANCAIS ESPAÑOL n CAUTIONS ON INSTALLATION NOTES ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO n PRÉCAUTIONS D’INSTALLATION WARNINGS AVERTISSEMENTS ADVERTENCIAS EMPLAZAMIENTO DE LA INSTALACIÓN • Avoid high temperatures. • Eviter des températures élevées. • Evite altas temperaturas. Allow for sufficient heat dispersion when Tenir compte d’une dispersion de chaleur Permite la suficiente dispersión del calor cuando z installed in a rack. suffisante lors de l’inst
ページ4に含まれる内容の要旨
Simple version Basic version Advanced version Information ENGLISH Getting started Thank you for purchasing this DENON product. To ensure proper operation, please read these owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Contents Advanced version ·······························································27 Accessories Getting started ··············································································1 Speaker inst
ページ5に含まれる内容の要旨
ENGLISH Features Cautions on handling • Before turning the power switch on Fully discrete, identical quality and power for all Auto setup function Check once again that all connections are correct and that there are The unit is provided with an “Auto setup function” which 7 channels (110 W x 7ch) no problems with the connection cables. automatically makes speaker settings best suited for the listening The unit is equipped with a power amplifier that plays back high- • Power is supplied to s
ページ6に含まれる内容の要旨
Simple version Basic version Advanced version Information ENGLISH Simple version Simple version (Simple setup guide) Here, we explain the entire setup procedure, from unboxing the unit to using it in a home theater. The “Simple version” describes the installation, connection and setup methods for 5.1-channel speakers. See page 28 for the installation, connection and setup methods for speakers other than 5.1-channel speakers. n Before connecting the unit, turn off the power to all devices. n For
ページ7に含まれる内容の要旨
ENGLISH 1 2 3 4 5 1 2 3 4 5 1 2 Install Connect NOTE This unit can perform 2.0/2.1 to 7.1-channel surround playback. Speakers • Connect so that the speaker cable core wires Here, we explain setup using the example of 5.1-channel speaker do not protrude from the speaker terminal. The protection circuit may be activated if the Carefully check the left (L) and right (R) playback. core wires touch the rear panel or if the + and – channels and + (red) and – (black) polarities sides touch each o
ページ8に含まれる内容の要旨
Simple version Basic version Advanced version Information ENGLISH Connect Blu-ray Disc player and TV Use only an HDMI (High Definition Multimedia Interface) cable that bears the HDMI logo (a certified HDMI product). Using a cable without the HDMI logo (an uncertified HDMI product) may result in abnormal playback. When outputting Deep Color or 1080p, etc., we recommend you use a “High Speed HDMI cable” or a “High Speed HDMI cable with Ethernet” for enhanced high-quality playback. TV Blu-ray
ページ9に含まれる内容の要旨
ENGLISH 1 2 3 4 5 Set up speakers 3 4 Turn on power 1 2 3 4 5 ® (Audyssey Auto Setup) Turn on the TV and subwoofer 1 power. The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey Auto Setup”. To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we recommend you measure in six positions, as shown in the illustration (u
ページ10に含まれる内容の要旨
Simple version Basic version Advanced version Information ENGLISH ® Set up speakers (Audyssey Auto Setup) About setup microphone placement Set up the microphone Set up the remote control unit 3 1 Mount the setup microphone on a tripod or stand n Set up the zone mode • Measurements are performed by placing the setup microphone and place it in the main listening position. successively at multiple positions throughout the entire listening Press ZONE SELECT to switch the zone mode to When placin
ページ11に含まれる内容の要旨
ENGLISH ® Set up speakers (Audyssey Auto Setup) Step 1 Step 2 Preparation Speaker Detection Measurement • In step 1, you will perform measurements at the main listening position. • In step 2, you will perform measurements at Connect the setup microphone to the • This step automatically checks the speaker configuration and speaker size, and calculates the channel multiple positions (two to six positions) other than 4 SETUP MIC jack of this unit. level, distance, and crossover frequency. It als
ページ12に含まれる内容の要旨
Simple version Basic version Advanced version Information ENGLISH ® Set up speakers (Audyssey Auto Setup) Step 3 Step 4 Step 5 Finish Calculating Check Store Unplug the setup microphone from Use ui to select the item you want Use ui to select “Store” and then Step 2 On the screen, use ui 10 11 13 14 the unit’s SETUP MIC jack. to check, and then press ENTER. press ENTER. to select “Calculate”, and then press Save the measurement results. ® Step4:Check ENTER. Set Dynamic Volume .
ページ13に含まれる内容の要旨
ENGLISH Error messages Parameter Check ® An error message is displayed if Audyssey Auto Setup could not be completed due to speaker placement, the measurement environment, etc. This function enables you to check the measurement results and If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey Auto Setup over again. equalizer characteristics after Audyssey Auto Setup. NOTE Use ui to select “Parameter Check” and then Be sure to turn off the powe
ページ14に含まれる内容の要旨
Simple version Basic version Advanced version Information ENGLISH 1 2 3 4 5 5 Play back disc When power is switched to standby Press BD to switch an input source Press POWER OFF. 1 for a player used for playback. GPower indicator status in standby modeH Play the component connected to • Normal standby : Off • When “HDMI Control” is set to “ON” : Red 2 this unit. Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand. You can also switch the power to s
ページ15に含まれる内容の要旨
ENGLISH Basic version Basic version Here, we explain the connections and basic operation methods for this unit. F Connections vpage 13 F Playback (Basic operation) vpage 19 F Selecting a listening mode (Surround mode) vpage 24 n Refer to the pages indicated below for information on connecting and playing back the various media and external devices. Connection Playback Audio and video TV vpage 14, 16 – Blu-ray Disc player vpage 14, 16 vpage 20 DVD player vpage 14, 16 vpage 20 Set-top box (
ページ16に含まれる内容の要旨
Simple version Basic version Advanced version Information ENGLISH Connections Important information • Make connections as follows before using this unit. Select an appropriate connection type NOTE according to the components to be connected. • Do not plug in the power cord until all connections have been completed. • You may need to make some settings on this unit depending on the connection method. Refer to • When making connections, also refer to the operating instructions of the other compo
ページ17に含まれる内容の要旨
ENGLISH Important information Connecting an HDMI-compatible device How the on-screen display appears in accordance with the video You can connect up to five HDMI-compatible devices to the unit. input signal HDMI function The way the on-screen display of the menus, status, etc., is displayed differs according to the type of video This unit supports the following HDMI functions: signal input to this unit. • 3D • Deep Color (vpage 69) n When video signals are input from the HDMI or component vid
ページ18に含まれる内容の要旨
Simple version Basic version Advanced version Information ENGLISH Connecting an HDMI-compatible device About ARC (Audio return channel) function The Audio Return Channel in HDMI 1.4a enables a TV, via a single HDMI cable, to send audio data • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an “upstream” to this unit. HDMI cable. • When connecting a device that supports Deep Color transmission, please use a “High Speed HDMI NOTE cable” or “High
ページ19に含まれる内容の要旨
ENGLISH Connecting a TV Connecting a Blu-ray Disc player / DVD player • Select the connector to use and connect the device. • You can enjoy video and audio from a Blu-ray Disc or DVD. • For video connections, see “Converting input video signals for output (Video conversion function)” • Select the connector to use and connect the device. (vpage 13). • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 14). • For instructions on HDMI connections, see “Connecti
ページ20に含まれる内容の要旨
Simple version Basic version Advanced version Information ENGLISH Connecting a set-top box (Satellite tuner/cable TV) Connecting a digital camcorder • You can enjoy video and audio from a digital camcorder. • You can watch satellite or cable TV. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 14). • Select the connector to use and connect the device. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 14). Cables use
