Xantech HD16Dの取扱説明書

ページ1に含まれる内容の要旨

INSTALLATION INSTRUCTIONS

HD16D
Component Video and Audio Distribution Amplifier

INTRODUCTION

The HD16D is a multi-A/V compatible distribution amplifier. Built to the highest standards, the HD16D
is capable of distributing high-definition images to multiple displays at over 150 feet. Multiple HD16Ds
can be daisy-chained to increase the number of distributed displays.

Features
• Drives up to six audio/video components from a single A/V source
• Compatible with all HDTV signa

ページ2に含まれる内容の要旨

INSTALLATION 1. Use high quality low-loss cables (RG-6 recommended) for all A/V connections. For runs in excess of 10 feet, use low-loss RG-6 coax. Runs in excess of 150 feet are not recommended. 2. The HD16D power should be switched on and off at the same time as the source equipment. It is recommended to use Xantech’s 680 AC Switcher to power synchronize all components. This will keep the video and audio signals at the same level. Application Connection Component Video Y, Pb, P

ページ3に含まれる内容の要旨

Expansion of Remote Location To extend up to 1000 feet, use HD44CC5 or HDTXSG01 and HDRXSG01 as such. 08905120A - 3 -

ページ4に含まれる内容の要旨

SPECIFICATIONS Video Gain: 2 Volt non-terminated, 1 Volt terminated, 75 Ohms ±1% Input Impedance: 75 Ohms Output Impedance: 75 Ohms Video Insertion Loss: 50 Hz to 10 MHz < .40 dB Video Crosstalk: ≥ 70 dB @ 10 MHz Return Loss: 50 Hz to 10 MHz 20 dB Video Bandwidth: > 100 MHz Video S/N Ratio: ≥ 70 dB @ 10 MHz Video 2nd Harmonic @ 10MHz: -45 dB Audio - Analog Gain: Unity Input Impedance: 20 kOhm Output Impedance: 150 Ohm THD: 0.05% at 1.0 Volts input level Frequency Respon