Kompernass KH 4055の取扱説明書

ページ1に含まれる内容の要旨

IB_KH4055_0706_UK.qxd 18.09.2006 14:11 Uhr Seite 1
Powerfix

 WHEEL NUT WRENCH KH4055

ページ2に含まれる内容の要旨

IB_KH4055_0706_UK.qxd 18.09.2006 14:11 Uhr Seite 2
Intended use The wheel nut wrench KH4055 is intended for loosening and tightening of wheel nuts / bolts during a tyre change. Technical data Length: 350 mm - 530 mm Wrench widths: 17 mm and 19 mm Using the wheel nut wrench • Park the vehicle on a level surface, put it in a low gear and set the hand break. • Also secure the vehicle against rolling with appropriate equipment.
Important: Follow the safety / operating instructions in the op

ページ3に含まれる内容の要旨

IB_KH4055_0706_UK.qxd 18.09.2006 14:11 Uhr Seite 3
• Lift the vehicle until the wheel to be changed is no longer in contact with the floor. • Remove the wheel nuts / bolts in an alternating cross pattern and remove the wheel. • Put the replacement wheel in position and tightly screw in the wheel nuts / bolts. • Lower the vehicle and retighten the wheel nuts in an alternating cross pattern with the wheel nut wrench.
Important: After changing the wheel, check the air pressure in all tyres.

ページ4に含まれる内容の要旨

IB_KH4055_0706_UK.qxd 18.09.2006 14:11 Uhr Seite 4 UK Kompernaß GmbH Burgstrasse 21 D-44867 Bochum www.kompernass.com ID No.: KH4055_0706_V1