ページ1に含まれる内容の要旨
Matrix-1000™
Reference Manual
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Matrix-1000™ REFERENCE MANUAL
ページ4に含まれる内容の要旨
DATALOGIC S.p.A. Via Candini 2 40012 - Lippo di Calderara di Reno Bologna - Italy Matrix-1000™ Reference Manual Ed.: 10/2004 ALL RIGHTS RESERVED Datalogic S.p.A. reserves the right to make modifications and improvements without prior notification. Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Product na
ページ5に含まれる内容の要旨
CONTENTS REFERENCES ............................................................................................. v Conventions.................................................................................................. v Reference Documentation ............................................................................ v Service, Support and Warranty..................................................................... v SAFETY PRECAUTIONS.........................................
ページ6に含まれる内容の要旨
3.4.2 Calibration................................................................................................... 35 3.5 Image Capture and Decoding ..................................................................... 39 3.6 Statistics...................................................................................................... 40 4 MAINTENANCE ......................................................................................... 41 4.1 Cleaning...............................
ページ7に含まれる内容の要旨
REFERENCES CONVENTIONS This manual uses the following conventions: "User" refers to anyone using a Matrix-1000™ reader. "Reader" refers to the Matrix-1000™ reader. "You" refers to the System Administrator or Technical Support person using this manual to install, configure, operate, maintain or troubleshoot a Matrix-1000™ reader. REFERENCE DOCUMENTATION For further details refer to: the VisiSet™ Help On Line, Matrix Reading Methods, Matrix Host Mode Programming, Matrix S
ページ8に含まれる内容の要旨
SAFETY PRECAUTIONS For installation, use and maintenance it is not necessary to open the reader. POWER SUPPLY ATTENTION: READ THIS INFORMATION BEFORE INSTALLING THE PRODUCT - This product is intended to be installed by Qualified Personnel only. This product is intended to be connected to a UL Listed Computer which supplies power directly to the reader or a UL Listed Direct Plug-in Power Unit marked LPS or “Class 2”, rated 10 to 30 V, minimum 1 A. COMPLIANCE LABEL
ページ9に含まれる内容の要旨
GENERAL VIEW Matrix-1000™ 1 4 5 6 7 3 2 Figure A 1 Reading Window 5 Good Read LED 2 Auxiliary Interface 6 External Trigger LED 3 Main/Auxiliary Interface 7 Power On LED 4 Main Tx LED vii
ページ10に含まれる内容の要旨
GUIDE TO INSTALLATION The following can be used as a checklist to verify all of the steps necessary for complete installation of the Matrix-1000 compact 2D reader. 1) Read all information in the section "Safety Precautions" at the beginning of this manual. 2) Correctly mount the reader using the bracket provided (sub-pars. under 2.2). 3) Position the reader at the correct reading distance according to your model (par. 2.5). 4) Make electrical connections to your Matrix-10
ページ11に含まれる内容の要旨
GENERAL FEATURES 1 1 GENERAL FEATURES 1.1 INTRODUCTION Matrix-1000 is an area CCD reader for industrial application using 2D, 1D, stacked and postal codes. Matrix-1000 uses imaging technology and provides complete reading system functions by integrating: lighting system, image acquisition, image processing, decoding and communication into a single compact unit. This technology intrinsically provides omni-directional reading. Standard Application Program A Standard Applicat
ページ12に含まれる内容の要旨
Matrix-1000™ 1 1.2 DESCRIPTION Some of the main features of this reader are given below: • Decoding of most popular linear and stacked barcodes, 2D code symbologies and postal codes • Omni-directional reading • Frame rate up to 30 frames/sec (1800 frames/min) • Moving code reading • Calibration Tool to verify exact code positioning in the Field of View and to maximize the reading performance • Parameter configuration via Windows-based VisiSet™ software • Different operating modes
ページ13に含まれる内容の要旨
GENERAL FEATURES 1 Electrical connection of Power, serial interfaces and I/O signals is provided through a 25-pin connector (see Figure A, 3). In addition there is a 9-pin Auxiliary interface connector for reader configuration (see Figure A, 2). The following indicators are located on the top of the reader: PWR red LED indicates that the reader is connected to the power supply (see Figure A, 7); TRIG yellow LED indicates external trigger activity (Figure A, 6); for details refer t
ページ14に含まれる内容の要旨
Matrix-1000™ 1 1.3 MODEL DESCRIPTION The Matrix-1000 reader is available in different versions according to the Optical Characteristics. MATRIX - 10X1 Optics 2 = High Density (HD) 3 = Standard Density (SD) 4 = Low Density (LD) 5 = Medium Range (MR) 1.4 AVAILABLE ACCESSORIES Order no. Accessory Description 93A051190 CAB-6001 cable to C-BOX100 1 m 93A051200 CAB-6002 cable to C-BOX100 2 m 93A051210 CAB-6005 cable to C-BOX100 5 m 93ACC1510 C-BOX 100 passive connection
ページ15に含まれる内容の要旨
GENERAL FEATURES 1 1.5 APPLICATION EXAMPLES The Matrix-1000™ wide choice of fields of view and high performance of decoding libraries allow the reading of many small codes (see 96 vial application in Figure 1) as well as deformed and / or overprinted codes also when they are damaged or printed on high reflective surfaces (see Figures 2, 3, 4). Figure 1 - 96-vial Rack with DataMatrix Codes to Track Each Vial Throughout its Biomedical Analysis Process Figure 2 - Unidose Flow-Pac
ページ16に含まれる内容の要旨
Matrix-1000™ 1 Figure 4 - Barcode Printed on Curved Surface Readable by Matrix-1000™ in spite of Image Optical Distortion The Matrix-1000™ is particularly suitable for applications requiring an array of readers to cover a very large reading area (see Figure 5). Figure 5 - Ten readers connected to a Datalogic MX4000 through a multidrop network. 6
ページ17に含まれる内容の要旨
INSTALLATION 2 2 INSTALLATION 2.1 PACKAGE CONTENTS Verify that the Matrix-1000 reader and all the parts supplied with the equipment are present and intact when opening the packaging; the list of parts includes: Matrix-1000 reader Quick Reference Guide Test chart Matrix family CD-ROM Auxiliary port connector cover Mounting kit • Mounting screws and washers (4 ea.) • Mounting bracket Figure 6 - Package Contents 7
ページ18に含まれる内容の要旨
Matrix-1000™ 2 2.2 MECHANICAL INSTALLATION Matrix-1000 can be installed to operate in different positions. The eight screw holes (M4 x 5) on the body of the reader are for mechanical fixture (Figure 7). The diagram below gives the overall dimensions of the reader and may be used for its installation. Refer to paragraph 2.5 for correct positioning. = 57 = [2.24] 73 [2.87] mm [inch] 57 18.1 [2.24] [0.71] M4 x 5 n°4 Figure 7 - Overall Dimensions 8 121 [4.76] 4 [0.16] 5
ページ19に含まれる内容の要旨
Ø8.2 [Ø0.32] INSTALLATION 2 73 [2.87] 37 [1.46] 15 [0.59] 2 [0.08] mm [inch] 4.2 [0.17] Figure 8 - Mounting Bracket Dimensions 9 Ø4.2 [Ø0.17] 95 [3.74] 47.5 47.5 [1.87] [1.87] 95 [3.74]
ページ20に含まれる内容の要旨
Matrix-1000™ 2 2.2.1 Mounting Matrix-1000™ Using the Matrix-1000™ mounting bracket you can obtain vertical shift and rotation of the reader as shown in the diagram below: Figure 9 - Positioning with Mounting Brackets 10
