ページ1に含まれる内容の要旨 
                    
                         
Precision Series
ZX-30RG
User Guide
Please read these instructions carefully before use
World-wide Headquarters:
3000 North 29th Ct.
 Hollywood, Florida, USA 33020
Tel: +1-954-929-1115   Fax: +1-954-929-5560
www.ChauvetLighting.com                                                                                                                                                                                                                                                                           
                    
                    ページ2に含まれる内容の要旨 
                    
                        On Front: •Scanning Range Post •Scanning Mirror • Lens On Bottom •Funtion Switch •Fuse Holder •Fan On Back: • Bracket Screws • Cable to Head • Dichroic Filter Holder •Gobo Holder •Lamp Replacement Rear View  Cover Front View Congratulations on the purchase of your new CHAUVET lighting effect. We are confident you will  enjoy many trouble free hours with this unit. To assist with the care and use of the product we have  prepared this short guide. Operation Before connecting this unit to the mains
                    
                    ページ3に含まれる内容の要旨 
                    
                        Features Removeable Head -To use the ZX-30RG as a projector, the head may be removed. In order to  remove the head, simply unscrew the four screws holding the head bracket to the body of the unit  and unplug the connecting cable. Selectable Scanning Range - The ZX-30RG offers the user a choice of 3 scanning ranges (180, 150  or 120 degrees). To select the desired scanning range, simply put the set screw in the hole marked  with the range required. Function - The ZX-30RG offers the user a choice 
                    
                    ページ4に含まれる内容の要旨 
                    
                        Replacing Fuses If the unit does not function at all when connected to the main power supply i.e. the mechanism  does not spin. Then it is highly likely that the fuse has blown. Disconnect from main power supply before attempting to replace either lamps or fuse. In order to replace the fuse, disconnect from the main power supply first, and then unscrew the fuse- holder cover to reveal the fuse. The unit has a label attached which indicates the correct fuse rating  and you will also find this lis
                    
                    ページ5に含まれる内容の要旨 
                    
                        Power Connections The unit is supplied with a power plug appropriate to its voltage and destination. Should any other  connections be required they must be carried out with the following configuration. Earth = Green/Yellow cable Neutral = Blue cable Live = Brown cable In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection. In the UK, it is required that all mains plugs are fitted with 5A fuses. Technical Specifications  Power: 110V, 60 Hz or 230V, 50