ページ1に含まれる内容の要旨
Item #: WQ52C4DR
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 09/2010
ページ2に含まれる内容の要旨
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The four main types of hardware used to assemble this product are: wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate hol
ページ3に含まれる内容の要旨
Parts List
ページ4に含まれる内容の要旨
Hardware List Wood dowel Cam bolt Cam lock Door stopper Door stopper Medium screw Large bolt Handle Small bolt Door stopper plate Small screw Plastic pivot Standard door hinge Extra-large screw Door hinge Door hinge Shelf support pin Plastic wedge Large screw Wrench W Glue tube * Sticker *Stickers (X) can be used to cover all visible cam locks after the stand is assembled.
ページ5に含まれる内容の要旨
Screw cam bolts (B) into top panel (1). Attach door stoppers (D,E) to top panel (1) usng medium screw (F). Attach legs (14) to bottom panel (2) using large bolts (G) and wrench (V). Insert dowels (A) into slats (11,12,13). Screw cam bolts (B) into slat (11).
ページ6に含まれる内容の要旨
Screw cam bolts (B) into doors (15,16). Attach handles (H) to doors (15,16,17,18) using small bolts (I). Attach door stopper plates (J) to doors (15,16,17,18) using small screws (K). Attach door hinge (R) to door (17) and door hinge (P) to door (18) using small screws (K). Screw cam bolts (B) into panels (3,4,5,6). Insert dowels (A) into panels (3,4,5,6) and shelves (8).
ページ7に含まれる内容の要旨
Screw cam bolts (B) into panels (19,20,21,22). Insert dowels (A) into shelves (23,24) and panels (19,20,21,22). Insert cam locks (C) into panel (8). Attach panels (3,5) to panel (8) using cam bolts and dowels as guides. Tighten cam locks (C) with a screwdriver.
ページ8に含まれる内容の要旨
Insert cam locks (C) into panel (8). Attach panels (4,6) to panel (8) using cam bolts and dowels as guides. Tighten cam locks (C) with a screwdriver. Attach the assemblies from Step 6 and Step 7 to bottom panel (2) using large bolts (G) and wrench (V).
ページ9に含まれる内容の要旨
Attach slats (12,13) to slat (11) using cam bolts as guides. Insert cam locks (C) into slats (12,13) and tighten with a screwdriver. Attach the slat assembly from Step 9 to bottom panel (2) by inserting the dowels of the slat assembly into the pre-drilled holes of bottom panel (2).
ページ10に含まれる内容の要旨
Slide back panels (9,10) into the stand assembly. Note that the back panels will slide down in the grooves along the back of the stand assembly. Insert cam locks (C) into the stand assembly. Attach top panel (1) to the stand assembly using cam bolts and dowels as guides. Tighten cam locks (C) with a screwdriver.
ページ11に含まれる内容の要旨
Insert plastic pivots (L) into top panel (1) and bottom panel (2). Insert door hinge (P) into bottom left plastic pivot (L). Slide door (17) into place by inserting pre-attached door hinge (R) into top left plastic pivot (L). Attach door hinge (P) to door (17) using small screws (K). Insert door hinge (R) into bottom right plastic pivot (L). Slide door (18) into place by inserting pre-attached door hinge (P) into top right plastic pivot (L). Attach door hinge (R) to door (18) using small scre
ページ12に含まれる内容の要旨
Attach panels (19,20) to shelves (23,24) using cam bolts and dowels as guides. Insert cam locks (C) into shelves (23,24) and tighten with a screwdriver. Note that two cam locks will be inserted into each shelf. Attach panels (21,22) to shelves (23,24) using cam bolts and dowels as guides. Insert cam locks (C) into shelves (23,24) and tighten with a screwdriver. Note that two cam locks will be inserted into each shelf.
ページ13に含まれる内容の要旨
Attach the shelf assembly from Step 15 to door (15) using cam bolts and dowels as guides. Insert cam locks (C) into panels (19,20) and tighten with a screwdriver. Note that two cam locks will be inserted into each panel. Attach the shelf assembly from Step 16 to door (16) using cam bolts and dowels as guides. Insert cam locks (C) into panels (21,22) and tighten with a screwdriver. Note that two cam locks will be inserted into each panel.
ページ14に含まれる内容の要旨
Align the door assembly from Step 17 with the left side of the stand and attach to the stand using standard door hinges (M) and extra-large screws (N). Repeat this process on the right side of the stand using the door assembly from Step 18. Insert shelf support pins (S) into the stand interior at desired shelf height. Carefully place shelf (7) on shelf support pins (S).
ページ15に含まれる内容の要旨
10 9 10 Secure back panels (9,10) using plastic wedges (T) and large screws (U).
