ページ1に含まれる内容の要旨
8843 H-4DC Instruction Leaflet 26/5/05 2:46 pm Page 2
‘Wolflite’ Safety Handlamp H-4DC
Operation and Maintenance Instructions
Wolflite
Safety
Handlamp
H-4DC
ページ2に含まれる内容の要旨
8843 H-4DC Instruction Leaflet 26/5/05 2:46 pm Page 3 ‘Wolflite’ Primary Cell Safety Handlamp H-4DC Operation and Maintenance Instructions Certification EEx e ib IIB T4 Certificate: BASEEFA Ex. 843292 Certificate: 86/00089 Use of ‘Wolflite’ Primary Cell Handlamps in Hazardous Areas • The H-4DC Handlamp is approved for use in potentially explosive gases and vapours zone 1 and 2. Applicable standards: EN 50014:1977, EN 50019:1977, EN 50020:1977. • Copies of Certificates are available on request
ページ3に含まれる内容の要旨
8843 H-4DC Instruction Leaflet 26/5/05 2:46 pm Page 4 To open the lamp The Lens Ring is unscrewed from the Body to gain access to internal parts and the Dry Cell cassette. To fit primary cells Withdraw battery cassette from body and load with four cells, negative cell end positioned to spring, positive cell end positioned to cup washer. Flattened cells must be removed immediately to avoid over discharge and cell leakage. To operate and replace the switch The slide switch operates as indicat
ページ4に含まれる内容の要旨
8843 H-4DC Instruction Leaflet 26/5/05 2:46 pm Page 1 Spare Parts List for ‘Wolflite’ Safety Handlamp H-4DC H-4DC Description H-104 'O' ring seal (black) H-03 Magnet Switch complete H-09 Reed Switch H-11 Sleeve for Shorting Link H-12 Link Contact H-13 Battery Contact H-14 Screw for Contacts H-15DC Body Complete H-17 Lens Ring H-18 Washer for Disc H-19 Glass Disc toughened H-21A Reflector H-22 Reflector Retaining Ring H-24 Reflector Distance Piece H-25 Bulb Socket H-26K Bulb 4.8V 0.5A (2.4W) K
