ページ1に含まれる内容の要旨
MODEL BCH7109A
OPERATOR'S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for battery charger you have
purchased. You may need to refer to these instructions at a later date.
2. CAUTION. To reduce risk of injury, charge only wet cell, lead-acid, automotive type rechargeable batteries. Other types of batteries
may burst causing personal injury and property damage.
3. Do not expose the charger to rain or snow if
ページ2に含まれる内容の要旨
15. CHARGER LOCATION a. Locate the charger as far away from the battery as the DC cables permit. b. Never place the charger directly above the battery being charged; gases from the battery will corrode and damage the charger. c. Never allow battery acid to drop on the charger when reading the specific gravity or filling battery, d. Do not operate the charger in a closed-in area, or restrict ventilation in any way. e. Do not set a battery on top of the charger. 16. DC CONNECTION PRECAUTIONS a. Co
ページ3に含まれる内容の要旨
20. GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS The charger should be grounded to reduce the risk of electric shock. This charger is equipped with an electric cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER. Never alter the AC cord or plug provided - if it will not fit the outlet, have a proper outlet installed by a qualified elec
ページ4に含まれる内容の要旨
OPERATING INSTRUCTIONS CAUTION - This battery charger must be fully assembled before operating. Failure to do so may result in risk of injury. USE OF THE INSTRUMENT PANEL: The MINUTES CHARGE timer has an OFF position, a CONTINUOUS CHARGE position and a timed charge range from 0 to 90 minutes. a. OFF - Always make sure the timer is in the OFF position before connecting or disconnecting the clamps from the battery. The charger will not charge with the timer in this position. b. 0 to 90 MINUTES T
ページ5に含まれる内容の要旨
WIRING DIAGRAM MODEL BCH7109A PARTS LIST Front leg .......................................... 605671 AC Cord .......................................... 610696 Wheels w/nuts (2) ................................... 605672 Switch w/knob ...................................... 605675 Handle ........................................... 605213 DC Cable Set ...................................... 610855 Stop/Go Lite ....................................... 604579 DC Circuit Breaker (1) ....................
ページ6に含まれる内容の要旨
BCH7109A ENGLISH MANUAL ILLUSTRATION LISTING 27-600E.MAN FIG. FILE NAME DESCRIPTION 1 MTLOGO.EPS MAC TOOLS LOGO 2 STOP-GO.WPG STOP GO LITE ON BATTERY-ENGLISH 3 EXT-BAT.WPG EXTERNAL BATTERY W/EXTENSION LEAD 4 PLUG-ENG.PLT GROUNDING ADAPTER -ENGLISH 5 ENGLSTBL.PLT CHARGE RATE TABLE - ENGLISH 6 27-600A.PLT BCH7109A CHARGER 7 6009B-E.PLT 6009 WIRING DIAGRAM - ENGLISH Revision record 01/98 Add note 4 clamp bar attachment to assembly instructions. Revise figure 6 graphic 27-600a.plt to show clamp ba
