ページ1に含まれる内容の要旨
Item #: W52CCR
Assembly Instructions
Revised 07/2012
ページ2に含まれる内容の要旨
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main types of hardware used to assemble this product are wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate h
ページ3に含まれる内容の要旨
Parts List
ページ4に含まれる内容の要旨
Hardware List
ページ5に含まれる内容の要旨
Insert dowels (A) into panels (2,5). Insert dowels (A) into panels (3,4) and slats (14). Screw cam bolts (B) into panels (3,4) and slats (14).
ページ6に含まれる内容の要旨
Screw cam bolts (B) into top panel (1). Screw cam bolts (B) into bottom panel (9).
ページ7に含まれる内容の要旨
Attach slat (14) to panel (3) using cam bolts and dowels as guides. Secure the two pieces together using cam locks (C). Tighten cam locks (C) with a screwdriver. Attach slat (14) to panel (4) using cam bolts and dowels as guides. Secure the two pieces together using cam locks (C). Tighten cam locks (C) with a screwdriver.
ページ8に含まれる内容の要旨
Attach panels (3,4) to panel (5) using cam bolts and dowels as guides. Secure panel (3) to panel (5) using cam locks (C). Tighten cam locks (C) with a screwdriver.
ページ9に含まれる内容の要旨
Secure panel (4) to panel (5) using cam locks (C). Tighten cam locks (C) with a screwdriver. Attach the panel assembly from the previous step to bottom panel (9) using cam bolts and dowels as guides.
ページ10に含まれる内容の要旨
Secure panel (3) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver. Secure panel (4) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver.
ページ11に含まれる内容の要旨
Carefully slide panels (2) into place using cam bolts and dowels as guides. Secure panels (2) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver.
ページ12に含まれる内容の要旨
On opposite side of console, secure panels (2) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver. Carefully slide back panels (10,11) into place along back side of console. Panels (10,11) will overlap slightly as shown in insert above.
ページ13に含まれる内容の要旨
Secure back panels (10,11) to the console using screws (J). Carefully fit top panel (1) into place using cam bolts and dowels as guides.
ページ14に含まれる内容の要旨
Secure top panel (1) to panels (2,3) using cam locks (C). Tighten cam locks (C) with a screwdriver. Secure top panel (1) to panels (2,4) using cam locks (C). Tighten cam locks (C) with a screwdriver.
ページ15に含まれる内容の要旨
1 2 2 On back side of console, secure top panel (1) to panels (2) using cam locks (C). Tighten cam locks (C) with a screwdriver. Cover all visible cam locks with stickers (K) as desired.
ページ16に含まれる内容の要旨
Attach hinges (G) to doors (12,13) using screws (H). Attach doors (12,13) to the console using screws (H) at hinges (G). See page 2 for specific instructions on how to adjust hinges so doors are aligned with console as desired. Attach handles (D) to doors (12,13) using bolts (E).
ページ17に含まれる内容の要旨
Insert shelf support pins (F) into console at desired shelf heights. Insert shelf support pins (F) into console at desired shelf heights.
ページ18に含まれる内容の要旨
Carefully place shelves (6,7,8) into console. Shelves (6,7,8) will rest on the shelf support pins.