ページ1に含まれる内容の要旨
PRINTER’S INSTRUCTIONS: INSTR,OWNER’S GUIDE,MC111M/DM - LINEAR P/N: 115740 B - INK: BLACK - MATERIAL: 20 LB. MEAD BOND
SIZE 5.500” x 8.500” - SCALE 1-1 - FOLDING: ALBUM-FOLD - BINDING: SADDLE-STITCH
MC111M & MC111DM
INTERCOM SYSTEM
OWNER’S GUIDE
VOLUME
DOOR TALK
MONITOR DOOR ROOM
LO HI LO HI
LISTEN TALK
SPEAKER SYSTEM
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
This booklet contains the information you need to get the most enjoyment from your MC111M or MC111DM intercom as well as important warranty information. Retain this booklet for future reference. CONTENTS ABOUT YOUR SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 MASTER UNIT CONTROLS AND FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 REMOTE STATION CONTROLS AND FEATURES . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
ABOUT YOUR SYSTEM The MC111M or MC111DM from M&S Systems is a complete home communications system that includes these outstanding features: Convenient room-to-room communication throughout your home. Safely answer your front door from any room in the house. A high quality built-in 3-note door chime that can be used on one or two doors. The second door will sound only one note for easy identifi cation between the two doors. Room monitoring that helps you to keep watch over your baby or small chi
ページ5に含まれる内容の要旨
MASTER UNIT CONTROLS AND FEATURES The illustration below shows the controls and features used to operate the MC111M or MC111DM Master Units. 1 7 2 VOLUME DOOR TALK MONITOR DOOR ROOM LO HI LO HI LISTEN TALK SPEAKER SYSTEM 6 3 4 5 1. Speaker/Microphone 5. Door Listen Switch 2. Speaker Volume 6. Room Talk Switch 3. System Volume 7. Door Talk (Press both buttons) 4. Monitor Switch (Door Release on MC111DM) 3
ページ6に含まれる内容の要旨
REMOTE STATION CONTROLS AND FEATURES The illustration below shows the controls and features used to operate the N35 or N35D remote station models. 1 5 VOLUME DOOR TALK DOOR ROOM LO HI LISTEN TALK 2 SPEAKER 4 3 1. Speaker/Microphone 2. Speaker Volume (Door Release N35D only) 3. Door listen 4. Room talk 5. Door talk (Press both buttons) 4
ページ7に含まれる内容の要旨
REMOTE STATION with MONITOR - CONTROLS AND FEATURES The illustration below shows the controls and features used to operate the N14 remote station model. 1 6 VOLUME DOOR TALK MONITOR DOOR ROOM LO HI LISTEN TALK 2 SPEAKER 5 3 4 1. Speaker/Microphone 2. Speaker Volume 3. Monitor 4. Door listen 5. Room talk 6. Door talk (Press both buttons) 5
ページ8に含まれる内容の要旨
SETTING UP YOUR SYSTEM System Volume Control - This control is located only on the master speaker. The normal range is between 12 and 1 o’clock. Speaker Volume Control - The normal setting for speaker volume control knobs is the maximum clockwise position. Speaker volume controls should only be turned down to make a particular room quieter than others. Chime Volume - Chime volume was set during installation but may be changed if necessary. Before changing the chime volume, be sure all speake
ページ9に含まれる内容の要旨
OPERATING YOUR SYSTEM Room Talk Press and hold this button to talk to other room stations, including patio speakers. Door Listen Press and hold this button to listen to the door speaker(s). Door Talk Press and hold both 'Room Talk' and 'Door Listen' to talk to the door speaker(s). Monitor Press this locking button to monitor this station from other rooms. For example, in a baby’s room, you would press the button in and be able to hear the baby at any of the other room stations. Rooms in moni
ページ10に含まれる内容の要旨
TROUBLESHOOTING TIPS PROBLEM WHAT TO CHECK Chime does not ring or is Speaker volume controls have been turned down. not loud enough. Check to see if speaker is in monitor mode. Chime volume needs to be adjusted (see Setting Up Your System). Feedback or squeal is heard System volume has been set too high. when communicating. Intercom communication is Speaker volume controls have been turned down. not loud enough. System volume is set too low. Music volume is too loud Speaker volume controls have
ページ11に含まれる内容の要旨
WARRANTY M&S Systems Limited 2-Year No-Fault Warranty M&S Systems warrants for 2 years from date of “fi rst user” purchase all products to be free of factory caused defects of material or workmanship. M&S Systems will repair or replace, at its option, parts and material at no charge. This warranty extends to the original purchaser of the product and to each subsequent owner of the product during the term of this warranty. This No-Fault warranty covers only the liability described above and do
ページ12に含まれる内容の要旨
Distributed by: 115740 B
