ページ1に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS
TECHNICAL MANUAL TABLE OF CONTENTS APRIL 2007
T ABLE OF CONTENTS
USER INSTRUCTIONS SECTION
PART DESCRIPTION PAGE
1 ENHANCED DISPLAY PROGRAMMING
1.1 OVERVIEW ........................................................................................... 1.1
1.2 LOCKING YOUR KEYSET................................................................... 1.4
1.3 CHANGING YOUR PASSCODE ......................................................... 1.5
1.4 CALL FORWARDING ......
ページ2に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 PART 1. ENHANCED DISPLAY PROGRAMMING 1.1 OVERVIEW • iDCS KEYSETS This diagram illustrates the keys on a iDCS 28 BUTTON and a iDCS 18 BUTTON keyset that have special functions during programming. When required, these keys will be referred to by the names described in the diagram. 1.1
ページ3に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 This diagram illustrates the keys on a iDCS 8 BUTTON keyset that have special functions during programming. When required, these keys will be referred to by the names described in the diagram. • ITP and DS 5000 Series Keysets This diagram illustrates the keys on an ITP 5021-D keyset. The ITP and DS 5000 keysets have keys that have special functions during programming. When required, these keys will
ページ4に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.2 LOCKING YOUR KEYSET You can lock your keyset to prevent other people from making or receiving calls while you are away. You can unlock it when you return. ACTION DISPLAY [201] STN LOCK 1. Press the transfer key followed by 100 PASSCODE:_ Display shows [201] STN LOCK 2. Enter your passocde UNLOCKED Default is 1234 [201] STN LOCK 3. Enter 1 for locking outgoing calls (Internal LOCKED OUT
ページ5に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.3 CHANGING YOUR PASSCODE Each keyset user can set or change his/her individual passcode. This passcode is used to lock or unlock keysets, for toll restriction override and to access the DISA feature. NOTE: Default passcodes cannot be used for toll restriction override or for DISA access. ACTION DISPLAY [201] PASSCODE 1. Press the transfer key followed by 101 OLD CODE:_ Display shows [201] PASSC
ページ6に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.4 CALL FORWARDING The OfficeServ 7100 allows the system administrator to program the call forward destinations for other station users. This MMC also allows call forward to be set after the destination has been entered. The OfficeServ 7100 system allows four types of call forwarding: FORWARD ALL, FORWARD NO ANSWER, FORWARD BUSY, and FORWARD DND. There is an additional option, FORWARD BUSY/NO ANSWER, that allows b
ページ7に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 [201] FORWARD 2. Dial 0 – to select forward type 1:ALL CALL:NONE OR Press UP or DOWN to select forward type and press RIGHT soft key to move cursor [201] FORWARD 3. Dial destination number (e.g., 201) 1:ALL CALL:205 OR Press UP or DOWN to select destination and press RIGHT soft key to move cursor [201] FORWARD 4. Dial 1 for YES, 0 for NO CURENTLY SET :YES OR Press UP or DO
ページ8に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.5 SETTING YOUR ANSWER MODE Each keyset can have its answer mode for intercom calls set to one of the following options: RING—The station will ring in one of eight custom ring patterns. Calls are answered by pressing the ANS/RLS key or lifting the handset. AUTO—After giving a short attention tone, the station will automatically answer calls on the speakerphone. When a C.O. line is transferred to a station in Aut
ページ9に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.6 PROGRAMMING YOUR STATION’S NAME Names are written using the keypad. Each key press selects a character. Pressing the dial pad key moves the cursor to the next position. For example, if the directory name is “SAM SMITH,” press the number “7” four times to get the letter “S.” Press the number “2” once to get the letter “A.” Continue selecting characters from the table below to complete your message. Pressing the bot
ページ10に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.7 PROGRAMMING PERSONAL SPEED DIAL LOCATIONS You can program frequently dialed telephone numbers in a personal speed dial list. Each station user begins with ten numbers 00–09 and may be assigned up to fifty numbers. See your system administrator to determine the amount assigned to your station. NOTE: Press button B for flash and button C for pause. Display keyset users may want to hide some speed dial number
ページ11に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.8 NAMING YOUR PERSONAL SPEED DIAL LOCATIONS This program allows a character name to be entered for each personal speed dial location. This name enables the speed dial number to be located when using the directory dial feature. The directory dial feature allows the display keyset user to select a speed dial location by scanning its name. There are up to 11 characters that can be used. ACTION DISPLAY [20
ページ12に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.9 ADDING EXTENDERS TO KEYS This program allows you to assign key extenders to make a general access feature key more specific. The feature keys that can have extenders are listed below: FEATURE KEY DESCRIPTION EXTENDER BOSS Boss and Secretary 1–4 DP Direct Pickup Extension or station group number DS Direct Station Select Any extension number FWRD Call Forward 0–5 GPIK Group Pickup 01–20 IG In/Out of Group
ページ13に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.10 CHECKING STATION STATUS This program displays the following attributes of a station port. This is a read only feature. 0 PORT # Cabinet 2 Slot 3 1 PICKUP GROUP None, 01–20 2 SGR Station Group Number 3 BOSS-SECR None, 1–4 4 PAGE Page Zone (1–4) 5 COS NO COS (1–30) per Ring Plan (01–06) 6 TENANT GROUP 1 ACTION DISPLAY [201] STN STATUS 1. Press the transfer key followed by 108 PORT:C1-S02-P01 D
ページ14に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.11 CHANGING YOUR TIME AND DATE DISPLAY Display keysets will always have the date and time displayed when not in use. You can select from the following display options: 0 COUNTRY Sets overall display format and has two options 0 = ORIENTAL MM/DD DAY HH:MM 1 = WESTERN DAY DD MM HH:MM 1 CLOCK Sets format of clock display and has two options 0 = 12 HOUR (Displays 1 P.M. as 01:00) 1 = 24 HOUR (Disp
ページ15に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.12 SETTING STATION ON/OFF OPTIONS The OfficeServ 7100 allows the system administrator to set any of the keyset features listed below. FEATURES DESCRIPTION Automatically places an existing C.O. call AUTO HOLD 00 on hold if a CALL button, trunk key or trunk route key is pressed during that call. Automatically starts the stopwatch timer 01 AUTO TIMER during a C.O. call. When ON, this feature disables the hook
ページ16に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 FEATURES DESCRIPTION When set to OFF an OHVA will be heard through the keyset speaker rather than the 13 SECURE OHVA handset. 14 NOT FOR USA This option determines whether CO calls arriving at a station will be auto answered if 15 AUTO ANS CO auto answer is selected in MMC 103. For ITP phones with 2 Line Display Set to ON will require user to press SEND button to make a call, it works like a cell 16 ENBLOCK 2L
ページ17に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 [201] STN ON/OFF If option 04 from above list is dialed at KEY TONE :ON Step 2 [201] STN ON/OFF If option 06 from above list is dialed at RING PREF :ON Step 2 [201] STN ON/OFF If option 07 from above list is dialed at DISPLAY :TIME Step 2 [201] STN ON/OFF If option 08 from above list is dialed at AUTO CAMPON :ON Step 2 [201] STN ON/OFF If option 10 from abo
ページ18に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.13 SELECTING A RING TONE Each keyset user can select one of eight ring frequencies. ACTION DISPLAY [201] RING TONE 1. Press the transfer key followed by 111 SELECTION 6 Display shows [201] RING TONE 2. Dial 1–8 to select the ring tone SELECTION 5 OR Press UP or DOWN to select the ring tone Press the right soft key to move the cursor 3. Press the transfer key to store and exit 1
ページ19に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.14 ALARM REMINDER Station users can have three alarms programmed at their phones. Each alarm may be one of the following three types: 0. NOTSET The alarm is not set. 1. TODAY ONLY The alarm will ring at the programmed time and be canceled automatically. 2. DAILY The alarm will ring each day at this time. ACTION DISPLAY [201] ALM CLK(1) 1. Press the transfer key followed by 112 HHMM: NOTSET Displa
ページ20に含まれる内容の要旨
OfficeServ 7100 USER INSTRUCTIONS TECHNICAL MANUAL PART 1 APRIL 2007 1.15 STATION VOLUME This procedure allows users to view and set the level of the volume for your keyset. 0. RING VOLUME Set a level for your keyset ring volume. There are eight levels of volume; level 1 is the lowest and level 8 is the highest. 1. OFF-RING VOL Set a level for your keyset off-hook ring volume. There are eight levels of volume; level 1 is the lowest and level 8 is the highest. 2. HANDSET VOL Set
