ページ1に含まれる内容の要旨
WSKP100
Wi-Fi Phone
User Guide
The whole world
can talk for free.
Skype.Com
www.smc.com
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
User Guide Guide Wi-Fi Phone IEEE 802.11b/g Wireless Phone with Skype Support
ページ4に含まれる内容の要旨
WSKP100 E072006-EK-R02 149100035700E
ページ5に含まれる内容の要旨
Compliances Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to ra
ページ6に含まれる内容の要旨
EC Conformance Declaration Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the following conformance standards: EN 60950-1 (IEC 60950-1) - Product Safety EN 300 328 - Technical requirements for 2.4 GHz radio equipment EN 301 489-1, EN 301 489-17 - EMC requirements for radio equipment This device is intended for use in the following European Community countries: Austria Be
ページ7に含まれる内容の要旨
Contents Chapter 1: Introduction 1-1 Package Checklist 1-1 Hardware Description 1-2 AC Power Charger 1-3 Mini USB Cable 1-3 Chapter 2: Installing the Battery 2-1 Charging the Battery 2-2 Powering On the Phone 2-3 Chapter 3: Getting Started 3-1 First-Time Startup 3-1 Understanding the Phones LCD Display 3-3 The Main Menu 3-5 The Power Key Menu 3-6 Creating a New Skype Account 3-7 Setting Up Your Contacts 3-8 Making a Call 3-8 Chapter 4: Managing Contacts 4-1 Adding a Contact 4-1 Adding a SkypeOu
ページ8に含まれる内容の要旨
Contents Recording a Voicemail Greeting 5-9 History Lists 5-10 Chapter 6: Personal Skype Settings 6-1 Changing Your Skype Status 6-1 Setting Your Profile 6-2 Changing Your Password 6-3 Privacy Settings 6-4 Chapter 7: Wi-Fi Network Settings 7-1 Finding Wi-Fi Networks 7-1 Preferred Networks 7-2 Setting Access to Open Networks 7-3 Chapter 8: General Settings 8-1 Changing the Display Language 8-1 Changing Display Settings 8-2 Setting Alert Tones 8-3 Setting the Time and Date 8-4 Displaying Phone Set
ページ9に含まれる内容の要旨
Chapter 1: Introduction The WSKP100 is a Wi-Fi (IEEE 802.11b/g) wireless phone that enables you to make Skype calls without using a computer. The phone enables you to use your normal Skype account with complete mobility, allowing you to talk from any location where you have an Internet connection through a nearby access point. Package Checklist The WSKP100 Wi-Fi Phone package includes these items: •One Wi-Fi Phone (WSKP100) • One Lithium-Ion battery •One headset •One mini USB cable •One AC po
ページ10に含まれる内容の要旨
Introduction Hardware Description LCD Volume 1 10 Display Button Navigation 2 Key Left 9 Soft Key Right 3 Soft Key End/Power 4 Key Send 8 Key Alphanumeric 7 Keypad Headset USB/Power 5 6 Jack Charge Port Before preparing the Wi-Fi Phone for use, first become familiar with its main keys, buttons, and other hardware features. 1.LCD Display — Color software menu display. 2. Navigation Key — Four-direction software navigation key. Pressing the key down selects the current option. 3.Right Soft Key —
ページ11に含まれる内容の要旨
Hardware Description 5.Headset Jack — Jack for headset connection. 6.USB/Power Charge Port — Power charger connection for charging battery. 7.Alphanumeric Keypad — Includes 0-9, A-Z, *, and # keys. • The [a/A *] key selects upper- or lower-case characters, numbers, or hexadecimal. • The [ 1 ] key selects common punctuation marks during text input. • The [ # ] key selects special characters and symbols during text input. 8.Send Key — Calls a selected contact. 9.Left Soft Key — Positive action
ページ12に含まれる内容の要旨
Introduction 1-4
ページ13に含まれる内容の要旨
Chapter 2: Installing the Battery After unpacking the Wi-Fi Phone, you must first install and charge the battery pack before turning on the phone. Warning: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Caution: Use only the Lithium-Ion battery pack supplied with the phone. Do not try to install any other battery. To obtain replacement batteries, contact your local dealer. 1. Remove Battery Compartment Cover — Place th
ページ14に含まれる内容の要旨
Installing the Battery Charging the Battery 1. Connect the AC Power Charger — Lift up the rubber cover on the mini USB charger port and connect the power charger to the port. Then, plug the charger into an AC electrical outlet. Note: The power charger automatically adjusts to any voltage between 100-240 volts at 50 or 60 Hz. 2. Fully Charge Battery — For the first time use, allow eight hours to fully charge the battery before turning on the phone. Lift Cover Connect Charger 3. Disconnect th
ページ15に含まれる内容の要旨
Powering On the Phone Powering On the Phone Push and hold down the End/Power key for more than two seconds to power on the phone. The LCD display turns on showing an image of a white sun on a yellow background. Allow 30 seconds for the phone to start up. Go to Chapter 3 “Getting Started” to learn how to set up a Wi-Fi network connection and start using the phone. Power On 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 a/A + 0 # * 2-3
ページ16に含まれる内容の要旨
Installing the Battery 2-4
ページ17に含まれる内容の要旨
Chapter 3: Getting Started The Wi-Fi Phone requires a wireless connection to a Wi-Fi access point to operate. In addition, the access point network must provide access to the Internet to make Skype calls. You can set the phone to connect to specific wireless networks or search for “open” networks. Wireless network information is stored in the phone’s memory as “Preferred Networks” that are searched for each time the phone is powered on. When powering on the Wi-Fi Phone for the first time, t
ページ18に含まれる内容の要旨
Getting Started 3. The phone scans for nearby wireless networks and lists those that it finds. Normally, you need to be within 90 m (300 ft) of a network’s wireless access point to be able to connect to it. If the network you want to connect to is not on the list, move to another location and try again. 4. From the wireless networks list, select the wireless network that you want to connect to and press the Left Soft Key to access Options menu. Then select “Connect.” If a security key is
ページ19に含まれる内容の要旨
Understanding the Phone’s LCD Display Understanding the Phone’s LCD Display The Wi-Fi Phone’s color LCD display provides various status indicators and access to the menu-based interface. The illustration below shows the main screen and its elements. Battery Status Wireless Signal Status Notifications Skype Online Status Current Time Skype Credit Left Soft Key Action Right Soft Key Action Battery Status — Indicates the status of the battery. The following states may be displayed: The battery i
ページ20に含まれる内容の要旨
Getting Started New Voicemail. A voicemail has been received, but has not yet been heard. Details Request. An new request has been received and is listed on the pending Details Request History screen. Silent. The silent mode is active. No ring tones or alerts will be heard. Keypad Locked. The keypad is currently locked. Services Expiry. Your Skype Credit for one or more services is close to expiry. Headset Attached. The headset is currently attached to the phone. Skype Online Status — Indicat
