ページ1に含まれる内容の要旨
NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 ICP/SX-200 ICP with
Mitel Networks 5220 IP Phone emulation
Setup and Administration
Part Number: 72-1084-02
Issue B
ページ2に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation NOTICE SpectraLink Corporation has prepared this document for use by SpectraLink personnel and clients. The drawings and specifications contained herein are the property of SpectraLink and shall be neither reproduced in whole or in part without the prior written approval of SpectraLink, nor be implied to grant any license to make, use, or sell equip
ページ3に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone M itel Networks ICP and 5220 IP Phone emulation Table of Contents 1. ABOUT THIS DOCUMENT 4 1.1 Contacting SpectraLink 4 1.2 Icons and Conventions 4 2. SPECTRALINK E340/I640 WIRELESS TELEPHONE OVERVIEW 5 2.1 Quick Start Guide 6 2.2 System Diagram 7 2.3 System Components 8 3. THE NETLINK E340/I640 WIRELESS TELEPHONE 10 3.1 Specifications 10 3.2 The Display 11 4. NETLINK E340/I640 WIRELESS T
ページ4に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation 1. About This Document This document explains how to configure and maintain the SpectraLink e340/i640 Wireless Telephone within the Mitel Networks 3300 and SX-200 Integrated Communications Platform (ICP). 1.1 Contacting SpectraLink SpectraLink wants you to have a successful installation. If you have questions please contact our Customer Support H
ページ5に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation 2. SpectraLink e340/i640 Wireless Telephone Overview The SpectraLink e340/i640 Wireless Telephone is a mobile handset for workplace IP telephone systems. The Wireless Telephone operates over an 802.11b wireless Ethernet LAN providing users a wireless voice over IP (VoIP) extension. By seamlessly integrating with the Mitel Networks IP telephony sys
ページ6に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation 2.1 Quick Start Guide 1. A wireless LAN must be properly configured and operational through the use of 802.11b wireless access points (APs) listed on the NetLink Wireless Telephone Access Point Compatibility matrix. 2. A TFTP Server must be available on the network in order to load the appropriate software into the Wireless Telephones. See the Li
ページ7に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation 2.2 System Diagram The following diagram shows the SpectraLink components residing on a network with the Mitel Networks IP telephony system, access points (APs), and wireless LAN Ethernet Switched Hub: Access Point TFTP Server SVP Server Ethernet switch Wireless Telephones Access Point Mitel IP system optional Wireless
ページ8に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation 2.3 System Components • • • • NetLink e340 Wireless Telephone – The NetLink e340 Wireless Telephone is a lightweight, durable handset specifically designed for mobile workplace use within a facility using the supported Mitel Networks IP telephony system and 802.11b APs in a wireless LAN. • • • • NetLink i640 Wireless Telephone – The NetLink i
ページ9に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation Access points must utilize SpectraLink Voice Priority (SVP). Contact SpectraLink, or a certified SpectraLink distributor, for information about APs that support SVP. • Ethernet Switch – interconnects multiple network devices, including the NetLink SVP Server, the supported Mitel Networks IP telephony system, Mitel Networks IP Phones and the access
ページ10に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation 3. The NetLink e340/i640 Wireless Telephone NetLink e340 Wireless Telephone NetLink i640 Wireless Telephone 3.1 Specifications Radio frequency 2.4000 – 2.4835 GHz Transmission type Direct Sequence Spread Spectrum (DSSS) Transmit data rate up to 11 Mb/s Radio QoS SpectraLink Voice Priority (SVP) Wireless security Wired Equivalent Privacy (WEP)
ページ11に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation 3.2 The Display Alphanumeric Display information provided by the supported Mitel Networks VoIP solution when the Wireless Telephone is off-hook will be passed directly to the Wireless Telephone display. The Wireless Telephone will display up to 18 characters of each line. Certain characters may be used by the supported Mitel Networks VoIP solut
ページ12に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation 4. NetLink e340/i640 Wireless Telephone Configuration The NetLink e340/i640 Wireless Telephones should be provisioned in the supported Mitel Networks VoIP solution in the same manner as the Mitel Networks 5220 Internet Telephones. Each Wireless Telephone may be configured for site-specific requirements by opening the Admin menu and selecting option
ページ13に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation Alphanumeric String Entry 1. Press the first digit/letter. The digit displays. Press the key again to scroll through the letters associated with that key. Example: if you press 2 repeatedly, you will see 2, A, B, and C, a, b, and c. The following table shows which key will allow you to enter non-numeric characters or other characters not represente
ページ14に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation The following table lists the Admin Menu items. Detailed descriptions of each item appear below the table. nd rd th Admin Menu Items 2 Level 3 Level 4 Level IP Address *Use DHCP Static IP Phone IP TFTP Server IP Default Gateway Subnet Mask SVP IP Addr RTC IP Addr OAI Server IP ESS ID Static Entry *Learn Once Learn Always Licens
ページ15に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation IP Address There are two modes in which the Wireless Telephone can operate: DHCP enabled or Static IP. Select the mode for operation from the IP Address menu: * Use DHCP: will use Dynamic Host Configuration Protocol to assign an IP Address each time the Wireless Telephone is turned on. If DHCP is enabled, the Wireless Telephone also receives all ot
ページ16に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation administrator for the proper settings for your network. Note that the Wireless Telephones cannot “roam” across subnets, since they cannot change their IP Address while operational. Ensure that all your access points are attached to the same subnet for proper operation. The Wireless Telephone can change subnets if DHCP is enabled, and the Wireless Te
ページ17に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation more information on this mode. Regulatory Domain The Regulatory Domain will default to North America on the Wireless Telephone display. FCC requirements dictate that the menu for changing the domain be available by password, which in our case is the LINE key. To change the domain, press LINE and then enter the digits that represent the site’s doma
ページ18に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation characters. (Use the 2 and 3 keys to access hexadecimal digits A-F, use the Right Arrow key to advance to the next digit, and the Left Arrow key to backspace.) For 40-bit keys you will need to enter 10 digits, for 128-bit keys you will need to enter 26 digits. The display will scroll as needed. Rotation Secret: This is used for proprietary WEP key r
ページ19に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation 4.2 User-defined Preferences The following user-defined preferences are also covered in the NetLink e340/i640 Wireless Telephone user guide. The system administrator can refer to this list for more information about customizing Wireless Telephone settings. To configure the following options, the Wireless Telephone must acquire the system (no error
ページ20に含まれる内容の要旨
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks ICP and 5220 IP Phone emulation Noise Mode: provides options that describe the noise level in your environment. Selecting the correct option will adjust the Wireless Telephone to account for background noise. Select Normal: for most office environments; High: for moderate background noise; or Severe: for extremely noisy conditions. Use of the non-Normal modes is not recommended
