ページ1に含まれる内容の要旨
Fujitsu LifeBook
T Series
BIOS Guide
LifeBook T Series Model:
T4020/T4020D
Document Date: 08/08/2005
Document Part Number: FPC58-1407-01
FUJITSU COMPUTER SYSTEMS
1
ページ2に含まれる内容の要旨
LifeBook T Series Tablet PC T Series BIOS ■ BIOS SETUP UTILITY Selecting a field causes a help message about that field to be displayed on the The BIOS Setup Utility is a program that sets up the right-hand side of the screen. operating environment for your tablet. Your BIOS is set ■ Pressing the Enter key with the highlight at the factory for normal operating conditions, therefore on a selection that is not a submenu or there should be no need to set or change the BIOS auto selection wi
ページ3に含まれる内容の要旨
Main Menu ■ If your tablet emits a series of beeps that sounds like a code and the display is blank, please refer to the Troubleshoot- ing section of your system Use’s Guide. The Troubleshooting Section includes a list of error messages and their mean- ings. ■ If your data security settings require it, you may be asked for a password before the operating system will be opened. 3. If an error message is displayed on the screen, and you want to enter the setup utility, press the [F2] key. 4
ページ4に含まれる内容の要旨
▲ ▲ ▲ LifeBook T Series Tablet PC MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current system parameters. (See Navigating through the Setup System Time and System Date can also be Utility on page 2 for more information) set from your operating system without The following tables show the names of the menu fields using the setup utility. Use the calendar for the Main menu and its submenus, all of the options and time icon on your Windows Cont
ページ5に含まれる内容の要旨
Main Menu Table 1: Fields, Options and Defaults for the Main Menu Menu Field Options Default Description System Date: –— –— Sets and displays the current date. Date is in a month/day/ year numeric format with 2 digits each for month and day and 4 digits for year. (MM/DD/YYYY) for example: 03/20/ 1998. You may change each segment of the date sepa- rately. Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys. Serial ATA Port 0 Selects the Serial The product # Display the type
ページ6に含まれる内容の要旨
▲ LifeBook T Series Tablet PC Serial ATA Port 0 Submenu of the Main Menu The Serial ATA Port 0 submenu identifies what Serial Note that actual hard drive label shown may vary. ATA/IDE devices are installed. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed. PhoenixBIOS Setup Utility Main Serial ATA Port 0 [FUJITSU MHT2040BH-SATA] Item Specific Help Type: [Auto] Select Serial ATA/IDE LBA Format drive installed here.
ページ7に含まれる内容の要旨
▲ Main Menu Primary Master Submenu of the Main Menu The Primary Master submenu identifies what primary Note that actual hard drive label shown may vary. devices are installed. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed. PhoenixBIOS Setup Utility Main Primary Master [MATSHITADVD-RAM UJ-840S-(PM)] Item Specific Help Type: [Auto] Select Serial ATA/IDE drive installed here. Multi-Sector Transfers: [Disabled] LBA Mode Control: [Disabled]
ページ8に含まれる内容の要旨
LifeBook T Series Tablet PC Menu Field Options Default Description Transfer Mode: Standard [Standard] The best option is selected by the BIOS automatically when Auto is Fast PIO 1 selected and cannot be selected by the user. Selects the method for Fast PIO 2 moving data to/from the drive. Autotype the drive to select the opti- Fast PIO 3 mum transfer mode. Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Ultra DMA Disabled [Disabled] The best option is selected by the BIOS automatically
ページ9に含まれる内容の要旨
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ Main Menu ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: Follow the instructions for Navigating Through the ■ Set the I/O addresses for the infrared ports. Setup Utility to make any changes. ■ Set the features of the keyboard/mouse. (See Navigating through the Setup Utility on page 2 for ■ Select between the display panel and/or an external more information) CRT display or video projector. ■ Set internal device configurations The foll
ページ10に含まれる内容の要旨
LifeBook T Series Tablet PC Table 4: Fields, Options and Defaults for the Advanced Menu Menu Field Description IrDA Port Configurations When selected, opens the IrDA Port Configurations submenu which allows the user to modify settings for infrared ports. Keyboard/Mouse When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal Features keyboard and mouse parameters. Video Features When selected, opens the Video Features submenu, which allows setting of
ページ11に含まれる内容の要旨
▲ Advanced Menu IrDA Port Configuration Submenu of the Advanced Menu The IrDA Port Configuration submenu provides the I/O addresses, DMA channels, and ability to set the I/O addresses and interrupt levels for Interrupt levels can be entered in various the infrared ports of your system. ways, including via the BIOS setup utility, the control software for the I/O device, or ■ To prevent IRQ and address conflicts, the hardware. If any two ports or devices avoid changing the default settings
ページ12に含まれる内容の要旨
LifeBook T Series Tablet PC Table 5: Fields, Options and Defaults for IrDA Port Configuration Submenu of Advanced Menu Menu Field Options Default Description ■ Infrared Port: Disabled [Enabled] Configures the infrared port using either no configuration (Disabled), a ■ user defined configuration (Enabled), or by allowing the BIOS or OS to Enabled ■ choose the configuration (Auto). Auto ■ Mode: IrDA [FIR] Select whether to use normal infrared or fast infrared mode. ■ FIR ■ I/O Address: 3F8 - 3FF
ページ13に含まれる内容の要旨
▲ Advanced Menu Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of NumLock. PhoenixBIOS Setup Utility Advanced Security Power Savings Exit Keyboard/Mouse Features Item Specific Help Numlock: [Off] Selects power-on state for Numlock. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 6. Keyboard/Mouse Features Submenu Table 6: Fields,
ページ14に含まれる内容の要旨
▲ LifeBook T Series Tablet PC Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Video Features Item Specific Help Display: [Auto] Select display terminal. Compensation: [Enabled] * This setting is not effective after operating system starts up. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save
ページ15に含まれる内容の要旨
▲ Advanced Menu Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Item Specific Help Internal Device Configurations [Disabled] Serial ATA Controller: [Enabled] Serial ATA port is AHCI Configuration: [Enabled] disabled. IDE Contoller: [Enabled] Bluetooth(R): [Enabled] [Enabled] Modem Controller: [Enabled] Serial
ページ16に含まれる内容の要旨
▲ LifeBook T Series Tablet PC CPU Features Submenu of the Advanced Menu The CPU Features Submenu allows the user to modify the Intel(R) SpeedStep(R) Technology features. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Item Specific Help CPU Features Select Enhanced Intel(R) SpeedStep(R) SpeedStep(R) Technology: [Enabled] On Battery: [Battery Optimized] Technology enabled or On AC: [Maximum Performance] disabled. XD Bit functionality: [Enabled]
ページ17に含まれる内容の要旨
▲ Advanced Menu USB Features Submenu of the Advanced Menu The USB Features Submenu configures the USB features for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit USB Features Item Specific Help [Enabled] Legacy USB Support: [Disabled] SCSI SubClass Support: [Enabled] The feature is disabled. [Enabled] Legacy Floppy Emulation is enabled and USB floppy is available without USB aware OS. F1 Help Select Item -/Space Change Values F9 Setup Defa
ページ18に含まれる内容の要旨
▲ LifeBook T Series Tablet PC Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations Submenu configures miscellaneous features for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Item Specific Help Miscellaneous Configurations Power Button: [Disabled] Configures the power Wake up on LAN: [Disabled] button. Auto Save To Disk: [Off] Volume Setting: [Middle] *ACPI OS ignores this setting. F1 Help Select Item -/
ページ19に含まれる内容の要旨
▲ Advanced Menu Event Logging Submenu of the Advanced Menu The Event Logging Submenu configures event logging features for DMI events. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Event Logging Item Specific Help Event Log Capacity: Space Available Press key to Event Log Validity: Valid view the contents of the event log. View Event Log: [Enter] Event Logging: [Enabled] System Boot Event: [Disabled] Clear All Event Logs: [No] Mark
ページ20に含まれる内容の要旨
▲ ▲ ▲ ▲ LifeBook T Series Tablet PC SECURITY MENU – SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security ■ If you set a password, write it down and features of your tablet to fit your operating needs and to keep it in a safe place. If you forget the view the current data security configuration. Follow the password you will have to contact your instructions for Navigating Through the Setup Utility to support representative to regain access make
