ページ1に含まれる内容の要旨
Fujitsu LifeBook
V Series
BIOS Guide
LifeBook V Series Model:
V1010
Document Date: 09/20/2007
Document Part Number: FPC58-1782-01
FUJITSU COMPUTER SYST EMS CORPORATION
1
ページ2に含まれる内容の要旨
LifeBook V Series Notebook BIOS Navigating through the Setup Utility V Series BIOS The BIOS setup utility consists of six menus: Info, BIOS SETUP UTILITY System, Advanced, Security, Boot, and Exit. This docu- ment explains each menu in turn, including all The BIOS Setup Utility is a program that sets up the submenus and setup items. operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, The following procedures allow you to navigate the the
ページ3に含まれる内容の要旨
BIOS Setup Utility severe, it will give you an opportunity to modify the setup utility settings, as described in the following steps: 1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press key to continue, to run SETUP 2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key. ■ I
ページ4に含まれる内容の要旨
▲ ▲▲ LifeBook V Series Notebook BIOS MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field’s function and any special information needed system parameters. Follow the instructions for Navi- to help understand the field’s use. gating Through The Setup Utility to make any changes. (See Navigating through the Setup Utility on page 2 for System Time and System Date can also be more information.) set from your operating system without using
ページ5に含まれる内容の要旨
Main Menu Table 1: Fields, Options and Defaults for the Main Menu Note that the parameters listed in the following table may vary depending upon your system’s configuration. Menu Field Options Default Description Drive0 The product number of Display the type of device on this ATA/ATAPI interface, if there is Selects Drive0 the hard drive. one. Pressing the Enter key selects the Drive0 submenu allowing submenu additional device configuration options for this interface. Drive1 The product numbe
ページ6に含まれる内容の要旨
▲ LifeBook V Series Notebook BIOS Drive0 Submenu of the Main Menu The Drive0 submenu identifies what ATA devices are installed. PhoenixBIOS Setup Utility Main Drive0 [FUJITSU MHV2080BH] Item Specific Help Select Serial ATA/ATAPI Type: [Auto]] LBA Format drive installed here. Total Sectors: 156301488 [Auto] Maximum Capacity: 80026MB SATA1 The BIOS auto-types the drive on boot time. [None] The drive is disabled. F1 Help Select Item -/Space Change Values F9 Setup Defau
ページ7に含まれる内容の要旨
▲ Main Menu Drive1 Submenu of the Main Menu The Drive1 submenu allows you to configure secondary ATA devices, such as an optical drive. PhoenixBIOS Setup Utility Main Drive1 [HL-DT-ST DVDRAM_GSA-T20N] Item Specific Help Type: [Auto] Select Serial ATA/ATAPI drive installed here. Multi-Sector Transfers: [Disabled] LBA Mode Control: [Disabled] [Auto] Transfer Mode: [Standard] The BIOS auto-types the Ultra DMA Mode: [Disabled] drive on boot time. [None] The drive is disabled. F1 Help Select It
ページ8に含まれる内容の要旨
LifeBook V Series Notebook BIOS Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu Menu Field Options Default Description ■ Transfer Mode: Standard [Standard] This option cannot be changed when Auto is selected.Selects the ■ method for moving data to/from the drive. Autotype the drive to Fast PIO 1 ■ select the optimum transfer mode. Multiword DMA is automatically Fast PIO 2 set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to ■ Fast PIO 3 mode 2 for Fa
ページ9に含まれる内容の要旨
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ Advanced Menu ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: Follow the instructions for Navigating Through the Setup Utility to make any changes. ■ Set the keyboard and mouse features. ■ Select between the display panel and an external CRT The following tables show the names of the menu fields display or video projector. for the Advanced Menu and its submenus, all of the ■ Enable or disable compensation for your display. options
ページ10に含まれる内容の要旨
LifeBook V Series Notebook BIOS Table 4: Fields, Options and Defaults for the Advanced Menu Menu Field Description Miscellaneous When selected, opens the Miscellaneous Configurations submenu to allow you to enable or disable the Configurations power button and the Wake Up On LAN feature, and to set the Volume Setting. Event Logging When selected, opens the event logging submenu. 10
ページ11に含まれる内容の要旨
▲ Advanced Menu Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard Features submenu is for enabling or disabling the NumLock feature. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Keyboard/Mouse Features Item Specific Help Numlock: [On] or [Off] [Off] Numlock in On or Off. * Windows XP preserves Numlock state when the user logs off. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save an
ページ12に含まれる内容の要旨
▲ LifeBook V Series Notebook BIOS Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Video Features Item Specific Help Display: [Auto] Select display terminal. Compensation: [Enabled] * This setting is not effective after operating system starts up. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Sa
ページ13に含まれる内容の要旨
▲ Advanced Menu Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Internal Devices Configurations Item Specific Help [Disabled] Serial ATA Controller: [Enabled] Serial ATA port is AHCI Configuration: [Enabled] disabled. IDE Controller: [Enabled] LAN Controller: [Enabled] [Enabled] Wireless LAN: [Enabled] Serial
ページ14に含まれる内容の要旨
▲ LifeBook V Series Notebook BIOS CPU Features Submenu of the Advanced Menu The CPU Features Submenu provides options for enabling or disabling the SpeedStep® Technology feature. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit CPU Features Item Specific Help Select Core Core Multi-Processing: [Enabled] Multi-Processing enabled or disabled. SpeedStep(R) Technology: [Enabled] On Battery: [Battery Optimized] On AC: [Maximum Performance] XD B
ページ15に含まれる内容の要旨
Advanced Menu Table 8: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu Menu Field Options Default Description ■ XD Bit Disabled [Enabled] Allows the user to enable and disable the Execute Disable Bit ■ functionality: Enabled functionality. Execute Disable Bit allows the processor to classify areas in memory where application code can and cannot execute. In the event an internet worm attempts to insert code in the buffer, the processor disables code execution t
ページ16に含まれる内容の要旨
▲ LifeBook V Series Notebook BIOS USB Features Submenu of the Advanced Menu The USB Features Submenu provides options for enabling or disabling legacy USB support. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit USB Features Item Specific Help [Disabled] [Enabled] Legacy USB Support: The feature is disabled. SCSI SubClass Support: [Enabled] [Enabled] Legacy USB Emulation is enabled and USB devices are available without USB aware OS. F1 Help Select Item -/
ページ17に含まれる内容の要旨
▲ Advanced Menu Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations Submenu provides options for enabling or disabling the power button and the Wake Up On LAN or USB features, and for setting the volume. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Miscellaneous Configurations Item Specific Help Configures the power Power Button: [Disabled] button. Wake up on LAN: [Disabled] Force LAN Boot: [Disabled] *ACPI OS
ページ18に含まれる内容の要旨
▲ LifeBook V Series Notebook BIOS Event Logging Submenu of the Advanced Menu The Event Logging Submenu configures event logging features for DMI events. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Event Logging Item Specific Help Event Log Capacity: Space Available Press key to Event Log Validity: Valid view the contents of the event log. View Event Log: [Enter] Event Logging: [Enabled] System Boot Event: [Disabled] Clear All Event Logs: [No] Mark Ev
ページ19に含まれる内容の要旨
▲ ▲ ▲ Security Menu SECURITY MENU – SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security ■ If you make an error when re-entering features of your notebook to fit your operating needs the password a [Warning] will be dis- and to view the current security configuration. Follow played on the screen. To try again press the instructions for navigating through the Setup Utility the Enter key and then retype the pass- to make any changes. (See Navigating through
ページ20に含まれる内容の要旨
LifeBook V Series Notebook BIOS Table 12: Fields, Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor –— Clear A display-only field. Set is displayed when the system supervisor password is set Password is: and Clear when it is not. User Password is: –— Clear A display-only field. Set is displayed when the general user password is set, and Clear when it is not. Set Supervisor –— [Enter] Sets, changes or cancels the Supervisor Password. Supervisor’s Passwo
