ページ1に含まれる内容の要旨
Fujitsu LifeBook
S Series
BIOS Guide
LifeBook S Series Model:
S7220
Document Date: 07/08/2008
Document Part Number: FPC58-1920-01
FU JITSU COMPUTER SYSTEMS CORPORATION
1
ページ2に含まれる内容の要旨
LifeBook S Series BIOS Navigating through the Setup Utility S Series BIOS The BIOS setup utility consists of six menus: Info, BIOS SETUP UTILITY System, Advanced, Security, Boot, and Exit. This docu- ment explains each menu in turn, including all The BIOS Setup Utility is a program that sets up the submenus and setup items. operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, The following procedures allow you to navigate the therefore th
ページ3に含まれる内容の要旨
Info Menu severe, it will give you an opportunity to modify the setup utility settings, as described in the following steps: 1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press key to continue, to run SETUP 2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key. ■ If your no
ページ4に含まれる内容の要旨
▲ LifeBook S Series BIOS INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION The Info Menu is a display only screen that provides the The information, including CPU type and configuration information for your notebook. speed, and total memory, displayed on this screen varies according to the unit you The following table shows the names of the menu fields purchased. for the Info menu and the information displayed in those fields. These fields are for information purposes only, and cannot be mod
ページ5に含まれる内容の要旨
▲ ▲▲ System Menu SYSTEM MENU – SETTING STANDARD SYSTEM PARAMETERS The System Menu allows you to set or view the current the field’s function and any special information needed system parameters. (See Navigating through the Setup to help understand the field’s use. Utility on page 2 for more information.) System Time and System Date can also be The following tables show the names of the menu fields set from your operating system without for the System menu and its submenus, all of the optio
ページ6に含まれる内容の要旨
LifeBook S Series BIOS Table 2: Fields, Options and Defaults for the System Menu Note that the parameters listed in the following table may vary depending upon your system’s configuration. Menu Field Options Default Description Drive0: Selects the Drive0 The product Display the type of device on this ATA/IDE interface. Pressing the Serial ATA drive number of the hard Enter key selects the Serial ATA Drive0 submenu. submenu drive. Drive1: Selects the Drive1 The product Display the type of device
ページ7に含まれる内容の要旨
▲ System Menu Drive0 Submenu of the System Menu The Drive0 submenu identifies what ATA devices are installed. Phoenix SecureCore(tm) Setup Utility Info System Advanced Security Boot Exit Item Specific Help Drive0 [FUJITSU MHZ2080BH G2] [Disabled] Drive0: [Enabled]] The drive is disabled. Type: Hard Disk [Enabled] Model: FUJITSU MHZ2080BH G2 The drive is enabled. Capacity: 80GB (80,026,361,856 Bytes) F1 Help
ページ8に含まれる内容の要旨
▲ LifeBook S Series BIOS Drive1 Submenu of the System Menu The Drive1 submenu allows you to configure secondary ATA devices. Phoenix SecureCore(tm) Setup Utility Info System Advanced Security Boot Exit Item Specific Help Drive1 [TEAC DV-W28S-R] Drive1: [Enabled] [Disabled] The drive is disabled. Type: CD/DVD Model: TEAC DV-W28S-R [Enabled] The drive is enabled. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select
ページ9に含まれる内容の要旨
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ System Menu ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: (See Navigating through the Setup Utility on page 2 for more information.) ■ Set the I/O addresses for the Serial and Parallel ports. ■ Set the keyboard and mouse features. The following tables show the names of the menu fields ■ Select between the display panel and an external for the Advanced Menu and its submenus, all of the display. options for each field, the default set
ページ10に含まれる内容の要旨
LifeBook S Series BIOS Table 5: Fields, Options and Defaults for the Advanced Menu Menu Field Description CPU Features When selected, opens the CPU Features submenu to allow you to change the CPU speed for battery life optimization. USB Features When selected, opens the USB Features submenu to allow you to enable or disable legacy USB devices and SCSI SubClass support. Miscellaneous Configurations When selected, opens the Miscellaneous Configurations submenu to allow you to enable or disable
ページ11に含まれる内容の要旨
▲ Advanced Menu Serial/Parallel Port Configuration Submenu of the Advanced Menu The Serial/Parallel Port Configuration submenu lets you ■ To prevent IRQ and address conflicts, set the I/O addresses and interrupt levels for the serial avoid changing the default settings. If and parallel ports of your notebook. you must change the settings, you can call 1-800-8Fujitsu for technical assis- I/O addresses, DMA channels and tance. Interrupt levels can be entered in various ■ If your notebook e
ページ12に含まれる内容の要旨
LifeBook S Series BIOS Table 6: Fields, Options and Defaults for the Serial/Parallel Port Configuration Submenu of Advanced Menu Menu Field Options Default Description ■ Serial Port: Disabled [Enabled] Configures the serial port using either no configuration (Disabled), ■ a user defined configuration (Enabled), or by allowing the BIOS or Enabled ■ OS to choose the configuration (Auto). Auto ■ Base I/O Address/IRQ: 3F8/IRQ 4 [3F8/IRQ 4] Allows user to set the serial port base I/O address and in
ページ13に含まれる内容の要旨
▲ Advanced Menu Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard. Phoenix SecureCore(tm) Setup Utility Info System Advanced Security Boot Exit Keyboard/Mouse Features Item Specific Help [On] or [Off] Numlock: [Auto] Numlock is On or Off. Hot Plug: [Enabled] [On/Padlock Off] Internal Pointing Device: [Auto Disabled] Numlock is On, but use Initialization on Re
ページ14に含まれる内容の要旨
▲ LifeBook S Series BIOS Video Features Submenu of the Advanced Menu The Video Features submenu is for setting the display parameters. Phoenix SecureCore(tm) Setup Utility Info System Advanced Security Boot Exit Video Features Item Specific Help Display: [Auto] Select display terminal. * This setting is not effective after operating system starts up. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit F
ページ15に含まれる内容の要旨
▲ Advanced Menu Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to enable or disable IDE, Bluetooth, LAN and Wireless LAN Controllers. Phoenix SecureCore(tm) Setup Utility Info System Advanced Security Boot Exit Internal Device Configurations Item Specific Help [Disabled] Serial ATA Controller: [Enabled] Serial ATA port is AHCI Configuration: [Enabled] disabled. Bluetooth(R): [Enabled] LAN Control
ページ16に含まれる内容の要旨
▲ LifeBook S Series BIOS CPU Features Submenu of the Advanced Menu The CPU Features submenu provides options for configuring the Intel Core Multi-Processing and SpeedStep power management features of the CPU. Phoenix SecureCore(tm) Setup Utility Info System Advanced Security Boot Exit CPU Features Item Specific Help Select Core Core Multi-Processing: [Enabled] Multi-Processing SpeedStep(R) Technology: [Enabled] enabled or disabled. XD Bit functionality: [Enabled] Vi
ページ17に含まれる内容の要旨
▲ Advanced Menu USB Features Submenu of the Advanced Menu The USB Features submenu provides options for enabling or disabling the USB devices. Phoenix SecureCore(tm) Setup Utility Info System Advanced Security Boot Exit USB Features Item Specific Help [Disabled] Legacy USB Support [Enabled] The feature is disabled. SCSI SubClass Support: [Enabled] [Enabled] Legacy USB Emulation is enabled and USB devices are available without USB aware OS. F1 Help Select Item -/Space
ページ18に含まれる内容の要旨
▲ LifeBook S Series BIOS Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the Wake Up On LAN feature, and setting the volume and video memory size. Phoenix SecureCore(tm) Setup Utility Info System Advanced Security Boot Exit Miscellaneous Configurations Item Specific Help Configures the power Power Button: [Disabled] button. Wake up on LAN: [Disabled] On
ページ19に含まれる内容の要旨
Advanced Menu Table 12: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of the Advanced Menu Menu Field Options Default Description ■ Volume Setting: Off [Middle] Selects the initial volume setting for the system. ■ Minimum ■ Middle ■ Maximum ■ Hardware Power Disabled [Enabled] Enables or disables the Hardware Power Management feature. ■ Management: Enabled ■ Low Power Mode: Disabled [Disabled] Enables and disables low power mode (Energy Star models). ■ Enabled 19
ページ20に含まれる内容の要旨
▲ LifeBook S Series BIOS Event Logging Submenu of the Advanced Menu The Event Logging submenu configures event logging features for DMI events. Phoenix SecureCore(tm) Setup Utility Info System Advanced Security Boot Exit Event Logging Item Specific Help Event Log Capacity: Space Available Press key to Event Log Validity: Valid view the contents of the event log. View Event Log: [Enter] Event Logging: [Enabled] System Boot Event: [Disabled] Clear All Event Logs: [No] Ma
