ページ1に含まれる内容の要旨
R NETWORK 1275 Danner Dr Tel:330-562-7070
TECHNOLOGIES Aurora, OH 44202 Fax:330-562-1999
NTI INCORPORATED www.networktechinc.com
®
RACKMUX Series
RACKMUX-V15/17
RACKMUX-D15/17
Rackmount Drawer with Keyboard, LCD
Monitor and Mouse
Installation and Operation Manual
MAN047 Rev Date 7/2/2008
ページ2に含まれる内容の要旨
TRADEMARK RACKMUX is a registered trademark of Network Technologies Inc in the U.S. and other countries. COPYRIGHT Copyright © 2007, 2008 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202. CHANG
ページ3に含まれる内容の要旨
TABLE OF CONTENTS Introduction......................................................................................................................................................................1 Features and Functions...................................................................................................................................................2 Installation .............................................................................................................
ページ4に含まれる内容の要旨
TABLE OF FIGURES Figure 1- Mount RACKMUX to a standard rack .................................................................................................................................3 Figure 2- Position RACKMUX with clearance to open .......................................................................................................................3 Figure 3- Mount to Telco post with optional mounting brackets....................................................................
ページ5に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE INTRODUCTION The RACKMUX-V15/17 Drawer (RACKMUX) consists of a Keyboard, Touchpad, and LCD monitor integrated into a 1RU rack-mountable drawer with wrist pads. When access to a server rack is needed, the drawer can be pulled out and the display lifted up like a notebook computer, revealing the keyboard and mouse. When the drawer is not in use, the display can be folded forward and down so the 1RU drawer can be pushed into
ページ6に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE 1 2 3 4 5 6 18 Fn PS/2 1 A 15 13 7 8 9 10 11 12 Front View 16 RA CKMUX-V17 14 17 - or - 21A 21B (RACKMUX-V17) (RACKMUX-D17) 19 22 24 Rear View 20 23 RACKMUX-V17 FEATURES AND FUNCTIONS 1. Power Button- press to turn the LCD monitor ON and OFF 2. Power LED- Indicates operation status Green = Power-ON, Video Input Signal OK
ページ7に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE INSTALLATION Rack Mounting Instructions The RACKMUX was designed to be mounted to a rack and includes mounting flanges to make attachment easy. 1. Determine the mounting height in the rack for the drawer. It should be a height comfortable to use the keyboard and see the LCD display. Mark holes in each of the 4 corner cabinet rails at points all level with each other. 2. Secure the rear brackets to the rear
ページ8に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE Optional Telco 2-Post Mounting If the Telco 2-post mounting bracket kit (NTI# RL-T15-TEL) is to be used, secure the short and long brackets to each side of the drawer as shown in Fig. 2. Apply 2 nuts (supplied) per bracket to secure the brackets to the drawer. Apply two #10-32x3/4” screws (supplied) per bracket to the post at the desired height. Slots are provided in the brackets to make minor depth adjustments eas
ページ9に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE REAR VIEW OF RACKMUX-V17 NETWORK TECHNOLOGIES NTI INCORPORATED 1275 Danner Dr Tel:330-562-7070 Aurora, OH 44202 Fax:330-562-1999 www.networktechinc.com USB Type A Male USB Type B Male USB-AB-2M (supplied) VEXT-6-MM (supplied) USB CPU 15HD Male Video Connector Figure 5- Connect a USB CPU When connecting a CPU with DVI support to th
ページ10に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE Connect Extra Device On the front of the RACKMUX is an additional USB Type A port to be used, if desired, for an extra accessory. Any low or full speed USB device may be connected to this port to be used. This port is fully compliant with USB standard 1.1. Note: In order for the optional USB device port to be usable, the USB port on the rear of the RACKMUX must be connected to a USB enabled CPU (a 2 meter U
ページ11に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE DISPLAY FUNCTIONS An NTI RACKMUX with a 17” monitor supports resolutions up to SXGA (1280 x 1024) with a refresh rate at between 55 and 76Hz. When a 15” monitor is present, support for resolutions up to XGA (1024 x 768) apply with a refresh rate at between 55 and 76Hz. The quality of the image on the LCD monitor is adjustable using an On Screen Display (OSD) menu using the control buttons on the RACKMUX. Standard C
ページ12に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE Brightness/Contrast Menu Selecting the Brightness/Contrast menu will bring up a screen in which the user can adjust the brightness and contrast levels of the LCD display. Using the Up or Down arrows to navigate the menu, highlight either the BRIGHTNESS or CONTRAST sections and press the Select button to choose the option to adjust. Then use the Up or Down Arrow to adjust the setting. Select EXIT when finished to ret
ページ13に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE Setup Menu Selecting the Setup menu will bring up a screen in which the user can adjust OSD POSITION-the position of the OSD menus on the LCD display OSD TIME-the length of time the user can be idle before the OSD menu automatically exits (adjustable from 10 to 60 seconds) LANGUAGE-the language that the OSD menus will be presented in With the item highlighted, (use the Up or Down arro
ページ14に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE KEYBOARD FUNCTIONS RACKMUX-V15 The keyboard on the RACKMUX-V15 (and RACKMUX–V17) is a standard condensed Windows format. To reduce the keyboard size, some keys have been assigned multiple functions, accessible via the "Fn" key. This section will describe which keys have multiple functions and how to enable them. Use the LEDs to know what special features are enabled. Function Key Operation The Function (“Fn”
ページ15に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE Number Pad The functionality of a Number Pad on a standard Windows keyboard has been incorporated into the keyboard of the RACKMUX-V15 (see Fig. 12, page 12 ). To substitute the keys of the Number Pad: 1. Press the "NumLock" key. The NumLock LED ( ) will illuminate. 1 2. Press the "Fn" key twice quickly (double-click). The "Fn" LED will illuminate. To turn OFF Number Pad functions: 1. Pres
ページ16に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE Num Lk Scr Lk & ( * 7 8 9 78 9 { UI O [ Enter 4 5 6 : " JK L ; ' + 12 3 * ? > M . / . 0 / Figure 12- Keys of the Number Pad Other Uses of the Function Key The Function ("Fn") key (page10) will enable other standard keyboard features in addition to the Number Pad keys (page 11) . Key Function when Fn key is Key Function when Fn key is not locked ("Fn" LED is OFF
ページ17に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE Numeric Keypad Option Models with the Numeric Keypad option (-N) (i.e. RACKMUX-V15-N) have a standard Windows keyboard with 17-key numeric keypad. When the Numeric Keypad option is present, the Function (“Fn”) key, (page 10) is only used to toggle between PS/2 and USB keyboard/mouse mode (page 14). Note: When the Numeric Keypad option is present, the "Fn" key does not lock. Instead, the “Fn” key operates similar
ページ18に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE Druck Rollen Pause F1 F2 F3 F5 F6 F7 F8 F11 F12 Entf Esc F4 F9 F10 S-Abf Untbr ( " % / ) = ? ! $ & Num Pos1 / 2 - 2 3 6 7 { 0 } 3 5 9 ] 1 4 8 [ * ^ \ * ' Bild 78 9 Q WE R T ZU I O P U Tab @ # + ~ Pos1 Bild + 45 6 Bild AS D F G H J K L O A ; : 12 3 Ende YX C V B N M , . u Bild Ende Enter > . 0 Fn Strg Alt AltGr Einfg < Einfg Entf
ページ19に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE DC POWER OPTION If the RACKMUX has been ordered with the DC Power option (“48V” at the end of the model number), a 3-terminal block has been provided for connection to a 36-72VDC 2A power source. The terminal block can be easily removed from under the protective bracket to make connections. Proper connections are indicated. Note: Be sure to properly secure the terminal block to the RACKMUX after wire insertion
ページ20に含まれる内容の要旨
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE SAFETY This NTI product has been designed and fully tested with user safety of the utmost importance. As with all electronic devices, this NTI product should be handled and operated with care. In order to avoid possible injury and to reduce any risk of damage to this product, please read and follow each of these safety instructions. • Follow all instructions found in this manual. • Follow all instructions found
