ページ1に含まれる内容の要旨
Fujitsu LifeBook
P Series
BIOS Guide
LifeBook P Series Model:
P5010/P5010D
Document Date: 5/15/03
Document Part Number: FPC58-0921-01
FUJITSU PC CORPORATION
ページ2に含まれる内容の要旨
LifeBook P5000 Notebook BIOS LifeBook P Series Notebook BIOS 4. To activate a submenu press [Enter]. BIOS SETUP UTILITY 5. To return to a menu from a submenu, press [Esc]. The BIOS Setup Utility is a program that sets up the 6. To go to Exit menu from another menu, press [Esc]. operating environment for your notebook. Your BIOS is 7. Pressing the [F9] key resets all items in the BIOS to set at the factory for normal operating conditions, the default values. therefore there is no need to set
ページ3に含まれる内容の要旨
Main Menu MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field’s function and any special information needed system parameters. Follow the instructions for to help understand the field’s use. Navigating Through the Setup Utility to make any changes. POINT The following tables show the names of the menu fields System Time and System Date can also be set from your for the Main menu and its submenus, all of the options operating
ページ4に含まれる内容の要旨
LifeBook P5000 Notebook BIOS Menu Field Options Default Description Primary Master: Selects Primary –— Displays the type of device on this ATA/ATAPI interface, if there Master submenu is one. Pressing the Enter key selects the Primary Master submenu allowing additional device configuration options for this interface. Secondary Selects –— Displays the type of device on this ATA/ATAPI interface, if there Master: Secondary is one. Pressing the Enter key selects the Secondary Master Master subm
ページ5に含まれる内容の要旨
Main Menu Note: Actual hard drive label shown may vary. Depending Primary Master Submenu of the Main Menu on the drive type, information such as cylinders, heads and The Primary Master submenu identifies which ATA sectors may also be displayed. devices are installed. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Info Exit Item Specific Help Primary Master [HITACHI_DK23EA-40-(PM)] Select ATA/ATAPI drive Type: [Auto] installed here. LBA Format
ページ6に含まれる内容の要旨
LifeBook P5000 Notebook BIOS Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu Menu Field Options Default Description n Heads: A number –— This item is active only when Hard Disk is selected as type. You can change between 1 and 16 the value by incrementing (pressing the [Spacebar]) or by typing in the number. n Sectors: A number –— This item is active only when Hard Disk is selected as type. You can change between 0 and 63 the value by incrementing (press
ページ7に含まれる内容の要旨
▲ Main Menu Note: Actual drive label shown may vary. Depending on the Secondary Master Submenu of the Main Menu drive type, information such as cylinders, heads and sectors The Secondary Master submenu identifies which ATA may also be displayed. devices are installed. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Info Exit Secondary Master [TOSHIBA DVD-ROM SD-R2412 -(SM)] Item Specific Help Select ATA/ATAPI drive Type: [Auto]] installed here. Multi-Sector Transfers
ページ8に含まれる内容の要旨
LifeBook P5000 Notebook BIOS Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu Menu Field Options Default Description Sectors: A number –— This item appears only when the type is identified as Auto or Hard between 0 Disk. When Hard Disk is selected, you can change the value. This and 63 field is changed by incrementing (pressing the [Spacebar]) or by typ- ing in the number. Maximum Display only –— Displays the maximum capacity of the drive calculated
ページ9に含まれる内容の要旨
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ Advanced Menu ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: Follow the instructions for Navigating Through the Setup Utility to make any changes. Select between the display panel and an external CRT display. The following tables show the names of the menu fields Enable or disable compensation for your display. for the Advanced Menu and its submenus, all of the Configure CPU and USB features. options for each field, the default
ページ10に含まれる内容の要旨
LifeBook P5000 Notebook BIOS Table 4: Fields, Options and Defaults for the Advanced Menu Menu Field Description USB Features When selected, opens the USB Features submenu, which allows enabling or disabling USB. Miscellaneous When selected, opens the Miscellaneous Configurations submenu, which allows you to change Configurations various settings. Event Logging When selected, opens the Event Logging submenu which lets you view and enable the event log. 10
ページ11に含まれる内容の要旨
▲ Advanced Menu Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the condition of the NumLock button. . PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Keyboard/Mouse Features Item Specific Help Select power-on state Numlock: [Off] for Numlock. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 5. Keyboard/Mouse Features Submenu
ページ12に含まれる内容の要旨
▲ LifeBook P5000 Notebook BIOS Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Video Features Item Specific Help Display [Auto]] Select display terminal. Compensation: [Enabled] F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 6. Video Features Submenu Table 6: Fields, Optio
ページ13に含まれる内容の要旨
▲ Advanced Menu Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configurations submenu allows the user to configure other internal devices. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Internal Device Configurations Item Specific Help [Disabled] IDE Controller: [Both] No IDE ports Modem Controller: [Enabled] are enabled. LAN Controller: [Auto] [Primary] Only primary IDE port is enabled. [Secondary] Only secondary IDE port is e
ページ14に含まれる内容の要旨
▲ LifeBook P5000 Notebook BIOS CPU Features Submenu of the Advanced Menu The CPU Features submenu configures certain features of the CPU in the system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit CPU Features Item Specific Help SpeedStep(R) Technology: [Disabled] Select Enhanced On Battery: [Battery Optimized] Intel(R) SpeedStep(R) On AC: [Maximum Performance] Technology enabled or disabled. F1 Help Select Item -/Space Change Values F9 Setup Defau
ページ15に含まれる内容の要旨
▲ Advanced Menu USB Features Submenu of the Advanced Menu The USB Features submenu configures the USB capabilities of the system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit USB Features Item Specific Help Legacy USB Support: [Enabled] [Disabled] SCSI SubClass Support: [Disabled] The feature is disabled. [Enabled] Legacy USB Emulation is enabled and USB devices are available without USB aware OS. F1 Help Select Item -/Space Change Values F9 Setup De
ページ16に含まれる内容の要旨
▲ LifeBook P5000 Notebook BIOS Miscellaneous Configurations Submenu of the Advanced Menu The CPU Features submenu configures certain features of the CPU in the system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Miscellaneous Configurations Item Specific Help Power Button: [Disabled] Configures the power Wake up on LAN: [Disabled] button. Volume Setting: [Middle] *ACPI OS ignores this setting. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exi
ページ17に含まれる内容の要旨
▲ Advanced Menu Event Logging Submenu of the Advanced Menu The Event Logging submenu is for setting up the logs for DMI event logging. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Event Logging Item Specific Help Event Log Capacity: Space Available Press key to Event Log Validity: Valid view the contents of the event log. View Event Log: [Enter] Event Logging: [Enabled] System Boot Event: [Disabled] Clear All Event Logs: [No] Mark Events as Read:
ページ18に含まれる内容の要旨
▲ ▲▲ LifeBook P5000 Notebook BIOS SECURITY MENU – SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security POINTS features of your notebook to fit your operating needs and to view the current data security configuration. Follow If you make an error when re-entering the password the instructions for Navigating Through the Setup Utility a [Warning] will be displayed on the screen. To try again, press the Enter key and then retype the pass- to make any changes.
ページ19に含まれる内容の要旨
Security Menu Figure 12. Security Menu Table 12: Fields, Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor –— Clear A display-only field. Set is displayed when the system supervisor Password is: password is set and Clear when it is not. User Password is: –— Clear A display-only field. Set is displayed when the general user pass- word is set, and Clear when it is not. Set Supervisor –— [Enter] Sets, changes or cancels the Supervisor Password. The Super
ページ20に含まれる内容の要旨
▲ LifeBook P5000 Notebook BIOS Hard Disk Security Submenu of the Security Menu The Hard Disk Security submenu is for configuring hard disk security features. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Hard Disk Security Item Specific Help Primary Master Password Is: Clear Secondary Master Password Is: Not Available Set Primary Master Password: [Enter] Set Secondary Master Password: [Enter] F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit S
