ページ1に含まれる内容の要旨
High-Speed High-Speed
Docking Station Docking Station
Belkin Tech Support Belkin B.V.
US: 310-898-1100, ext. 2263 Boeing Avenue 333
800-223-5546, ext. 2263 1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
UK: 0845 607 77 87
Australia: 1800 235 546 +31 (0) 20 654 7349 fax
New Zealand: 0800 235 546
Belkin Ltd.
Singapore: 800 616 1790
4 Pioneer Avenue
Europe: www.belkin.com/support
Tuggerah Business Park
Belkin International, Inc. Tuggerah, NSW 2259, Australia
+61 (0) 2 4350 4600
501 We
ページ2に含まれる内容の要旨
High-Speed High-Speed Docking Station Docking Station User Manual F5U273
ページ3に含まれる内容の要旨
Table of Contents 1. Introduction .....................................................................1 2. Installation .......................................................................2 3. Troubleshooting Guide — General and Video ................16 4. Troubleshooting Guide — Ethernet and Network ..........23 5. Troubleshooting Guide — Audio and Devices ................25 6. Information ....................................................................27
ページ4に含まれる内容の要旨
Introduction Congratulations and thank you for purchasing the High-Speed Docking Station from Belkin (the Docking Station). It plugs into 1 your notebook computer for one simple, fast connection for all your peripherals through your notebook’s ExpressCardTM 2 slot. Now you can connect to more than one monitor at a time, or to just one big-screen monitor, for a superior, digital video experience. Your keyboard, mouse, printer, scanner, camera, 3 MP3 player—and lots more—can stay plugged in
ページ5に含まれる内容の要旨
Installation ™ Installation for Windows Vista 1 IMPORTANT: INSTALL SOFTWARE FIRST. DO NOT connect the Docking Station before installing the 2 software, or the system may fail to work correctly. Go to http://www.belkin.com/highspeeddock/support/ to 3 check for updates and download the latest driver for Windows Vista before installing. 4 Operating-System Support NOTE: Currently, the Docking Station supports only 32-bit 5 ® versions of Windows XP and Windows Vista; 64-bit versions of Windows
ページ6に含まれる内容の要旨
Installation driver software anyway”. This product has been thoroughly tested to work with all Windows operating systems. 1 After the software installation is complete, a prompt will direct you to connect the Docking Station to your 2 notebook computer. CONNECT HARDWARE LAST 3 NOTE: Set the switch on the ExpressCard adapter to the “B” position. 4 When the message, “Please insert the High-Speed Docking Station into your notebook ExpressCard slot. Then, click ‘OK’.” 5 appears, connect you
ページ7に含まれる内容の要旨
Installation How do I uninstall the Docking Station’s drivers? 1 1. Click on the “Start” menu, then open the Control Panel. 2. Click on “Uninstall a program”. 2 3. Select “C-Media CM106 Sound Driver” and then click on “Uninstall/Change”. 3 4. Select “Belkin Notebook Expansion...” and then click on “Uninstall/Change”. 4 5. Your drivers are now successfully uninstalled from your computer. 5 How do I switch the default audio device? Your Docking Station features a built-in, 5.1 surround-s
ページ8に含まれる内容の要旨
Installation How do I enable 5.1 surround sound? 1 1. Click on the “Start” menu, then open the Control Panel. 2. Click on “Hardware and Sound”, then click on “Manage 2 audio devices”. 3. Select “C-Media CM106 Audio Device”, then click “Configure”. 3 4. Select “5.1 Surround” from Audio Channels, then click “Next”. 4 5 6 5 5
ページ9に含まれる内容の要旨
Installation Installation for Windows XP 1 IMPORTANT: INSTALL SOFTWARE FIRST. DO NOT connect the Docking Station before installing the 2 software, or the system may fail to work correctly. 3 Go to http://www.belkin.com/highspeeddock/support/ to check for updates and download the latest driver for Windows XP before installing. 4 NOTE: You must have administrator privileges to install the Docking Station’s drivers. If you do not have administrator 5 privileges, log off Windows and log in wi
ページ10に含まれる内容の要旨
Installation When the message, “Please insert the High-Speed Docking Station into your notebook ExpressCard slot. Then, click ‘OK’.” 1 appears, connect your Docking Station to the notebook and click “OK”. 2 After that, you will be prompted to restart your computer. Please do so at that time. 3 How do I uninstall the High-Speed Docking Station’s drivers? 1. Click on the “Start” menu, then open the Control Panel. 4 2. Click on “Add or Remove Programs”. 5 3. Select “C-Media USB Sound Driver
ページ11に含まれる内容の要旨
Installation How do I connect devices to the Docking Station? 1 NOTE: Always keep the Docking Station connected to the power adapter supplied with the product. The 2 Docking Station will not function without the power adapter connected. You may connect devices to the appropriate port on the 3 Docking Station while your notebook is running. A slight delay is normal before the notebook recognizes the 4 new device. USB 2.0 Ports 5 Connect any USB device to one of the Docking Station’s fi
ページ12に含まれる内容の要旨
Installation Video Ports (VGA or DVI) 1 Connect a VGA cable (sold separately) to the VGA video-output port on the Docking Station and to an external monitor. If you have a DVI-capable monitor, you will get better 2 performance by connecting a DVI cable to the DVI video- output port on the Docking Station and to the external monitor. 3 NOTE: Use this cable instead of the VGA cable and NOT in 4 addition to it. Either cable can be connected and disconnected at any time 5 without unplugging t
ページ13に含まれる内容の要旨
Installation NOTE: lf the video output of the Docking Station is configured in Extended Mode (see “Video Modes”, below) when you 1 disconnect the Docking Station, any open windows on the external monitor move to the primary notebook screen. When 2 the Docking Station is reconnected to the notebook, the video output is again configured for Extended Mode on the external monitor. However, windows that were previously on the 3 external monitor will stay on the primary notebook screen. Video M
ページ14に含まれる内容の要旨
Installation 2. Select “Primary Mode”. 1 3. Y our displays may flicker at this time and you may be asked to restart your computer. 2 Extended Mode Extended Mode lets you use more than one display with your notebook computer, which offers several advantages. For 3 example, in Extended Mode, you can: • Read email on one display and open attachments 4 on the other • Expand a spreadsheet across both monitors 5 • Incr ease your working area for graphics-editing by putting all the pallets an
ページ15に含まれる内容の要旨
Installation Mirror Mode 1 Mirror Mode creates an identical display of your notebook screen on the external monitor. This is useful, for example, if you want to use a larger desktop monitor rather than a 2 small notebook screen. In Mirror Mode, the Docking Station automatically selects settings (screen resolution, color quality, 3 and refresh rate) for the external monitor that will allow the best resolution based on your notebook’s settings. 4 NOTE: lf you do not see some icons on your ex
ページ16に含まれる内容の要旨
Installation number of columns and rows, the more clear and crisp your computer screen will appear. 1 There are two ways to change your display resolution: (1), through the Belkin system-tray application; or (2), through the 2 Windows Control Panel. To change the resolution using the Belkin 3 system-tray application: 1. Position the mouse on top of the “B” icon in your 4 computer’s desktop system tray (usually at the bottom-right of your desktop screen) and right-click on it. 5 2. Posi
ページ17に含まれる内容の要旨
Installation What happens when my notebook goes into standby or 1 hibernate mode? If the notebook goes into standby or hibernate mode, and the Docking Station is connected to a notebook and an external 2 monitor, the external monitor display goes blank. Closing the lid of your notebook while using your Docking 3 Station may cause your computer to enter these modes and disable your external monitor. To avoid this problem, Belkin has created an application that overrides a lid-activated 4 h
ページ18に含まれる内容の要旨
Installation How do I uninstall the Docking Station drivers? 1 To uninstall your Docking Station drivers: 1. Click on the “Start” menu, then open the 2 “Control Panel”. 2. Click on “Add or Remove Programs”. 3 3. Select “C-media USB Sound Driver” and then click on “Remove” at the bottom of the screen. 4 4. Select “Belkin High-Speed Docking Station.....” and then click on “Remove” at the bottom of the screen. 5 5. Your drivers should then be successfully uninstalled from your computer. 6
ページ19に含まれる内容の要旨
Troubleshooting Guide If your Docking Station does not operate as expected, check these items to try and correct the problem. If the problem 1 persists, please call Belkin Technical Support at 800-223-5546 ext. 2263. 2 General The Docking Station does not appear to be on. 3 1. Check to be sure that the power adapter included with the Docking Station is plugged into the Docking Station and 4 into a working electrical outlet. Do not use the adapter that came with your notebook or adapters
ページ20に含まれる内容の要旨
Troubleshooting Guide a. Make sure that the power adapter is connected to the Docking Station. 1 b. Plug a USB device, such as a USB mouse, into one of the USB ports of the Docking Station. Restart 2 your notebook. c. If Windows now finds new hardware, refer to “Installing 3 the Software Drivers” above and follow the steps to reinstall the software drivers. If installation is successful, the USB device plugged into the Docking Station should 4 work properly. If Windows does not fin
