Furuno NAVNET 1933C-BBの取扱説明書

デバイスFuruno NAVNET 1933C-BBの取扱説明書

デバイス: Furuno NAVNET 1933C-BB
カテゴリ: 海上GPSシステム
メーカー: Furuno
サイズ: 4.63 MB
追加した日付: 10/6/2014
ページ数: 92
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスFuruno NAVNET 1933C-BBの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Furuno NAVNET 1933C-BBに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Furuno NAVNET 1933C-BBをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Furuno NAVNET 1933C-BBのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Furuno NAVNET 1933C-BBの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Furuno NAVNET 1933C-BB 取扱説明書 - Online PDF
Advertisement
« Page 1 of 92 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Furuno NAVNET 1933C-BBを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Furuno NAVNET 1933C-BBの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

MARINE RADAR MODEL1823C-BB
MARINE RADAR MODEL1833C-BB
MARINE RADAR MODEL1933C-BB
MARINE RADAR MODEL1943C-BB
MARINE RADAR MODEL1953C-BB
COLOR VIDEO PLOTTER GD-1900C-BB
PRINTED IN JAPAN

ページ2に含まれる内容の要旨

Y Your our Local Local A Age gent nt//D De eal ale er r 9- 9-52 52 A Ashi shihar hara- a-cho, cho, N Niishi shinom nomiiy ya 662- a 662-8580, 8580, J JAPAN APAN Te Telle ep phone hone : : 0798- 0798-65- 65-2111 2111 Fax Fax 0798- 0798-65- 65-4200 4200 :: FIR FIRS ST E T ED DITION ITION : : DE DEC. C. 2003 2003 A All r ll riig gh ht ts r s re ese ser rv ve ed d. . P Pr rinte inted in J d in Ja apa pan n D D ::MAY. MAY. 20, 20, 2005 2005 P Pub. ub. No. No. I IM ME E- -35320- 35320-D D **000

ページ3に含まれる内容の要旨

SAFETY INSTRUCTIONS WARNING WARNING Do not open the equipment Radio Frequency unless totally familiar with Radiation Hazard electrical circuits and service manual. The radar antenna emits electromagnetic radio frequency (RF) energy which can be Only qualified personnel ELECTRICAL harmful, particularly to your eyes. Never should work inside the SHOCK look directly into the antenna aperture from HAZARD equipment. a close distance while the radar is in operation or expose

ページ4に含まれる内容の要旨

TABLE OF CONTENTS EQUIPMENT LISTS ................................................................................................. iii SYSTEM CONFIGURATIONS.................................................................................. v 1. MOUNTING .......................................................................................................... 1-1 1.1 Mounting the Control Unit....................................................................................................

ページ5に含まれる内容の要旨

EQUIPMENT LISTS Standard supply Name Type Code No. Qty Remarks Control unit RCU-017 - 1 Processor unit RPU-014 - 1 RSB-0094-0075 - MODEL1823C-BB RSB-0071-057 - MODEL1833C-BB XN10A-RSB-0070-064 - MODEL1933C-BB, 24 rpm XN10A-RSB-0073-064 - MODEL1933C-BB, 48 rpm Antenna unit 1 XN12A-RSB-0070-059 - MODEL1943C-BB, 24 rpm XN12A-RSB-0073-059 - MODEL1943C-BB, 48 rpm XN12A-RSB-0072-060 - MODEL1953C-BB, 4ft, 24 rpm XN12A-RSB-0073-060 - MODEL1953C-BB, 4ft, 48 rpm XN13A-RSB-0072-060 - MO

ページ6に含まれる内容の要旨

Optional supply Name Type Code No. Qty Remarks 000-013-484 For GD-1900C-BB, 100 VAC 000-013-485 For GD-1900C-BB, 110 VAC PR-62 1 Rectifier 000-013-486 For GD-1900C-BB, 220 VAC 000-013-487 For GD-1900C-BB, 230 VAC RU-3423 000-030-443 1 For MODEL series External buzzer XH3-BZ-L970 000-146-422 1 MJ-A6SPF0014-010 000-144-421 1 For NavNet, 1 m MJ-A6SPF0014-050 000-144-422 1 For NavNet, 5 m MJ-A6SPF0014-100 000-144-423 1 For NavNet, 10 m MJ-A6SPF0014-200 000-144-424 1 For NavNet, 20 m M

ページ7に含まれる内容の要旨

SYSTEM CONFIGURATIONS All NavNet products incorporate a "network circuit board" to integrate each NavNet product on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is assigned an IP address to enable transfer of images between other NavNet products. For example, video plotter pictures can be transferred to a radar and vice versa. Pictures received via the NavNet may be adjusted at the receiving end. The number of processor units which may be installed dep

ページ8に含まれる内容の要旨

Single-unit NavNet system (GD-1900C-BB) GPS receiver GP-310B/320B Processor unit Control unit RPU-014 RCU-017 SAVE SAVE HIDE HIDE CLEAR CLEAR MOB MOB SHOW SHOW A A ABC ABC DEF DEF GHI GHI 1 1 2 2 3 3 B B RANGE RANGE ALARM ALARM DISP DISP MENU MENU JKL JKL MNO MNO PQR PQR POWER 4 4 5 5 6 6 C C STU STU VWX VWX YZ& YZ& GAIN GAIN 7 7 8 8 9 9 D D F.G. 1 3 SLAVE DISPLAY POWER POWER TX TX _'# _'# EBL EBL 2 Monitor 0 0 VRM VRM E E GND PUSH TO ENTER PUSH TO ENTER OUTPUT 12 VDC NTSC/PAL (Owner supply) RG

ページ9に含まれる内容の要旨

Three-or-more-unit NavNet system Radar Antenna Unit Radar Antenna Unit OR OR GPS Receiver GP-310B/320B GPS Receiver GP-310B/320B RADAR RADAR or or PLOTTER PLOTTER Radar data Plotter data HUB Sounder data Sounder data Facsimile data Network Sounder Facsimile Network Sounder ETR-6/10N Receiver ETR-6/10N ETR-30N FAX-30 ETR-30N (option) (option) (option) Three-or-more-unit NavNet system vii

ページ10に含まれる内容の要旨

Two-unit NavNet system Radar Antenna Unit Radar Antenna Unit OR OR GPS Receiver GP-310B/320B GPS Receiver GP-310B/320B RADAR RADAR or or PLOTTER PLOTTER Radar, plotter data Radar, plotter data Two-unit NavNet system viii

ページ11に含まれる内容の要旨

1. MOUNTING 1.1 Mounting the Control Unit The control unit can be installed on a desktop or flush mounted in a console or panel. For flush mounting, the optional flush mount kit is required. When selecting a mounting location for the control unit keep the following in mind: • Keep the control unit out of direct sunlight. • The temperature and humidity of the mounting location should be moderate and stable. • Locate the unit away from exhaust pipes and vents. • The mounting location s

ページ12に含まれる内容の要旨

Mounting procedure Flush mounting Follow the procedure below to mount the control unit on a panel with accessories FP03-10001. 1. Prepare a cutout in the mounting location, referring to the outline drawing at the end of this manual. 2. Set the control unit to the cutout. 3. Attach the mounting plate to the control unit with four screws M4 x 10 from the rear side. 4. Screw four wing bolts into wing nuts. 5. Fasten the control unit to the mounting location with four wing bolts and win

ページ13に含まれる内容の要旨

Desktop mounting Use the optional desktop mount kit FP03-09901 (Code number 008-443-540). No. Name Type Code No. Qty 1 Hanger fixture 19-023-1061 100-307-941 1 2 Hanger fixture 19-023-1062 100-307-951 1 3 Tapping screw 5 x 20 000-802-081 4 4 Hex bolt M5 x 10 000-802-288 2 1. Fix the hanger fixture 19-023-1062 on a desktop with four tapping screws (5x20). 2. Fix the hanger fixture 19-023-1061 to the rear panel of the control unit with four M4x10 (supplied as accessories). 3. Set the

ページ14に含まれる内容の要旨

1.2 Mounting the Processor Unit The unit can be mounted on the deck, a desktop or on a bulkhead. Select a mounting location considering the points below. • Locate the unit out of direct sunlight. • Select a location where temperature and humidity are moderate and stable. • Consider the length of the cable connected among the processor unit, antenna unit (or power supply unit) and control unit. • For mounting on a bulkhead, be sure the mounting location is strong enough to support the u

ページ15に含まれる内容の要旨

1.3 Mounting the Antenna Unit of MODEL1823C-BB Mounting considerations When selecting a mounting location for the antenna unit keep in mind the following points. • Install the antenna unit on the hardtop, radar arch or on a mast on an appropriate platform. (For sailboats, a mounting bracket is optionally available.) It should be placed where there is a good all-round view with, as far as possible, no part of the ship’s superstructure or rigging intercepting the scanning beam. Any obstruc

ページ16に含まれる内容の要旨

Mounting the antenna unit of MODEL1823C-BB 1. Remove mounting hardware at the bottom of the antenna unit; four each of hex. bolts (M10X20), spring washers and flat washers. Save mounting hardware to use it to fix the antenna unit to the mounting platform later on. Stern Bow Screws two screws on other side Cable entry Flat washer Spring washer Hex bolt (M10 x 20) Antenna unit, showing location of mounting hardware 2. Construct a platform (wood, steel*, or aluminum) of 5-10 mm (recommend

ページ17に含まれる内容の要旨

Snap holder Remove and discard the packing material. Antenna unit, inside view 4. The mounting base is fitted with a snap holder, which may be used to hang the cover after removal. Use the hole next to screw hole inside the cover to hang it. a) Unfasten the snap assy. with the string attached at the holder in the mounting base. b) Unwind the string. c) Attach the snap to a screw hole on the inside of the cover. Note: Do not hang any other objects with the snap. 1-7

ページ18に含まれる内容の要旨

GND IF +VOP GND -VOP Vt GND 5. Unfasten the rotation detector cable from the cable clamps. 1 2 3 6. Unfasten 16 screws ( , and in the following figure) to dismount the shield plate, ! ! ! core case and core case cover. Pan head screws M3x10 2 pcs. 2 Core case cover 3 3 3 2 3 Pan head screws Core case 2 M4x10 5 pcs. 3 Cable clamps 1 1 3 Rotation detector cable 1 1 Shield plate 1 1 1 3 1 Pan head screws 1 M4x8 9 pcs. 1 3 3 3 Caution: Be careful not to pinch the rotation detector cable

ページ19に含まれる内容の要旨

Twist cables here. Attach EMI core. Shrink tube Gasket Mounting base 7. Pass the antenna cable with connector through the cable gland, gasket and cable entrance of the antenna unit, and then tighten cable gland. Note 1: Be sure the shrink tube on the antenna cable does not contact the gasket. Note 2: Pinch the gasket tightly and insert it into the cable entrance. Confirm that the slit in the gasket is completely closed after inserting it into the cable entrance. Rubber gasket Gasket Cab

ページ20に含まれる内容の要旨

9. Attach connectors of the antenna cable to the locations shown in the figure below, and then fasten a pan head screw M4x10 to fix shield cable and core case (removed at step 6.) Pan head screws M4x10 9 pcs. J810 J809 (13 pin) (4 pin) J801 (9 pin) Antenna unit, connector location and fixing the shield cable w/core case 10. Put the EMI core on the antenna cable into the core case attached at step 9. The flat side of the core should face downward. EMI core Core case EMI core, put


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Furuno 2105 取扱説明書 海上GPSシステム 7
2 Furuno GD-3100 取扱説明書 海上GPSシステム 41
3 Furuno GD-188 取扱説明書 海上GPSシステム 8
4 Furuno GD-3300 取扱説明書 海上GPSシステム 118
5 Furuno GP-1600F 取扱説明書 海上GPSシステム 55
6 Furuno GP-1870F 取扱説明書 海上GPSシステム 988
7 Furuno FEA-2100 取扱説明書 海上GPSシステム 1
8 Furuno GP-1800F 取扱説明書 海上GPSシステム 4
9 Furuno GP-1650W 取扱説明書 海上GPSシステム 154
10 Furuno GP-1610CF 取扱説明書 海上GPSシステム 319
11 Furuno GP-1250 取扱説明書 海上GPSシステム 68
12 Furuno GP-1650WD 取扱説明書 海上GPSシステム 0
13 Furuno GP-1800 取扱説明書 海上GPSシステム 20
14 Furuno GP-1810 取扱説明書 海上GPSシステム 15
15 Furuno GP-1850 取扱説明書 海上GPSシステム 114
16 Sony MZ-B100 取扱説明書 海上GPSシステム 19
17 ACR Electronics Nauticast Y1-03-0222 取扱説明書 海上GPSシステム 0
18 ACR Electronics MicroFix 2898 取扱説明書 海上GPSシステム 5
19 ACR Electronics ResQFix PLB-300 取扱説明書 海上GPSシステム 8
20 ACR Electronics Mini B300 Y1-03-0167 取扱説明書 海上GPSシステム 2